Dissertation > Excellent graduate degree dissertation topics show

Study on Smelting Technology of Weathering Steel 09CuPTiRE-B

Author: RuanJianBo
Tutor: ZhangFengShan
School: Wuhan University of Science and Technology
Course: Iron and steel metallurgy
Keywords: weathering steel smelting technology inclusion strengthening and toughening
CLC: TF761
Type: Master's thesis
Year: 2004
Downloads: 339
Quote: 0
Read: Download Dissertation

Abstract


Weathering steel, also named atmosphere corrosion resistant steel, is a kind of low alloy high strength steel which contains a amount of alloyed elements, such as, Cu, P, Cr, Ti, Ni and so on. 09CuPTiRE-A steel is produced by WISCO and Chinese-characterized Cu-P-RE series weathering steel used for railway rolling stock. Its product qualities have reached advanced internal levels and been appointed by the railway ministry the steels which are made railway rolling stock.With the development of trains’ increasing speed and lightweighting, the railway ministry has put forward a higher demand for 09CuPTiRE steel. Its strength must be improved from A grade to B grade except for superior corrosion resistant properties, this is to say, its yield strength and tensible strength are requested form 295MPa, 395MPa to 345MPa, 480MPa , respectively and excellent plasticity and toughness after enhancing strength.On the premise of no hugely changing the present production process, no increasing production cost and no altering the range of 09CuPTiRE-A steels’ chemical composition, the cleanliness and homogeneity of the steel are improved by means of adjusting composition control object, playing the microalloyed elements and RE parts to the full, rigid control of inclusion’s amount, size and form, ect.. Based on them the rolling and cooling process are optimized in order to fine grain microstructure are obtained, referring to strengthening and toughening mechanism of microalloyed steels. The function of precipitation and dislocation substructure strengthening are also important for improving strength and toughness in addition to fine grain strengthening.The industrial tests have been carried out in the No. 2 steelmaking plant of WISCO. The main elements’ weight percent of test steels completely reach control object and their fluctuation is in a narrow allowable band. Average area percent of inclusion in steels is less than 0.1%, its diameter is less than 4 um with a large percent amount to 99%. The results show that the test steel’s microstructure containing fine equiaxed ferrite+a little of acicular ferrite and pearlite has good mechanical properties and basically meets requirements of 09CuPTiRE-B steel with yield strength, impact energy at -40℃ and elongation more than 378MPa ,54J and 28%, respectively.

Related Dissertations

  1. LF thermal state slag recycling desulfurization behavior of the process,X757
  2. Synthesis and properties of new functionalized graphene oxide drug carriers,TQ460.4
  3. In accepting the edge of survival,C924.2
  4. Study on Inclusions Control of IF Steel for Auto Application,TF777
  5. Study on the Preparation of Ursolic Acid /β- Cyclodextrin Inclusion Complex by Ultrahigh Pressure,TQ461
  6. Based on the combined effect of the rough planning model,O221
  7. Direct smelting crude magnesium AM50 magnesium alloy inclusions in the analysis,TF822
  8. Direct smelting crude magnesium AM60 magnesium alloy inclusions analysis,TF822
  9. Inclusion criteria aviation engine casing Numerical and Experimental Study,V231
  10. Ore-forming Fluid and Metallogenic Mechanism of the Qiyugou Gold Deposit, Henan Province, China,P618.51
  11. Prokaryotic Expressionand Purification of MMP9-PEX and Research of Its Renaturation,R346
  12. Numerical Simulation of Inclusion of LF in Bao Gang,TF769.2
  13. Low carbon bainitic steel structure and mechanism of strength and toughness,TG142.2
  14. Organizations and alloying elements on the corrosion resistance of high-performance steel for railway vehicles,TG142.13
  15. The Preparation and Performance Study of Resin-Based Magnetoelectric Films,TB383.2
  16. Micro - Preparation and Characterization of Nanometer SiC / polypropylene composites,TQ325.14
  17. RP-HPLC of different cyclodextrin derivatives with cilostazol inclusion studies,R914
  18. A Study on Analysis of Maxillofacial Symmetry in 13-18 Year-old Adolescents in Shenzhen,R783.5
  19. Clinical Control Study of Laparoscopic Versus Open Hepatectomy,R735.7
  20. Study on the Inclusion Complex of Barnidipine and Buccaladhesive Tablets,R283
  21. Preparation of Oral Cavity Pharmaceutics Granules of Effective Components of Bupleurum Chinense,R283

CLC: > Industrial Technology > Metallurgical Industry > Steelmaking > A variety of steel smelting > Carbon steel
© 2012 www.DissertationTopic.Net  Mobile