Dissertation > Excellent graduate degree dissertation topics show

Parameter Identification of Synchronous Generator

Author: ZhangYangFei
Tutor: JuPing
School: Hohai University
Course: Proceedings of the
Keywords: Synchronous generator Parameter Identification Mechanical parameters Identifiability
CLC: TM341
Type: Master's thesis
Year: 2005
Downloads: 481
Quote: 4
Read: Download Dissertation

Abstract


Accurate set of parameters for the synchronous generator power system stability analysis, short-circuit calculation has very important significance. In this paper, practical projects , mainly studies the following questions : 1, BPA model for the study, study models and parameters corresponding issues. For straight shaft electrical parameters , the use of steady-state conditions and constraints between motor parameters are obtained only identify X d , X f , X ' d , T \/ sub>, T ' d0 , T \unit mechanical parameter identification problem in turbines and turbine as the research object , from the theoretical analysis of the mechanical parameter identifiability issues, and the synchronous generator mechanical parameters can be uniquely identified conclusions. numerical simulation example theoretical analysis . 3, the development of synchronous generator parameter identification software, which is a synchronous generator parameter identification engineering applications ready. 4 to study the synchronous generator identification modeling of a number of issues affecting the accuracy of identification that reasonable model and effective identification method is synchronous generator parameter identification key to the success of this paper for synchronous generator modeling and engineering applications of great significance.

Related Dissertations

  1. Research on Vector Control System of Induction Motor Based on DSP,TM346
  2. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  3. Research Implementation of Crack Detection Method Based on Its Acoustic Property,TP274
  4. Research on Utilization Technique of Regenerating Braking Energy in Urban Rail Traction System,TM922.3
  5. Study on Excitation and Speed Control System Modeling and Visualization Parameter Identification Software,TM743
  6. Communication constraints quantitative estimation system design and analysis,TP273
  7. Large CNC spiral bevel gear milling Error Analysis and Compensation Technology,TG547
  8. Small Unmanned Helicopter Modeling and Control System Design,V249.1
  9. Application Based on Mode Analysis and Signal Processing in Bridge Detection,TN911.7
  10. Research on Dynamic Modeling and Hydrodynamic Parameters Identification for AUV,TP242
  11. Research and Development on Compressor Oriented Modal Analysis System,TP311.52
  12. The Research of Parameters’ Identification for Vector Control System of Induction Motor,TM343
  13. Research on Hybrid Excitation Outer Rotor Synchronous Wind Generator,TM341
  14. Hardware-in-the-loop Simulation Station and Arm Real-time Simulation in Hydraulic Excavator,TU621
  15. Fault Diagnosis for Power Electronic Circuits Based on Hybrid System Model,TN710
  16. Error-Control of Whole-Procedure Construction Control in Spuer Long-Span Hybrid Girder Cable-Stayed Bridge,U448.27
  17. Channel Estimation Algorithm for OFDM Modulated Two-Way Relay Networks,TN919.3
  18. Research on Adaptive Synchronization and Control Strategy in Complex Networks,O157.5
  19. Research on Three-stage Brushless Synchronous Generator Excitation Control,TM31
  20. Research on Temperature Prediction Model of Molten Steel in LF,TF769
  21. Aerodynamic Parameter Identification Technology of Closed-loop Controlled Tactical Missiles,TJ761.1

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Synchronous motor
© 2012 www.DissertationTopic.Net  Mobile