Dissertation > Excellent graduate degree dissertation topics show

Research on Design and Implement of a Pressure-Time Curve Controlled Superplastic Bulging System

Author: TangLiMing
Tutor: TongGuoQuan
School: Nanjing University of Aeronautics and Astronautics
Course: Materials Processing Engineering
Keywords: Superplastic Bulging Measurement and control system PLC RS232 Serial communication Data exchanging Regulation valve
CLC: TG39
Type: Master's thesis
Year: 2006
Downloads: 163
Quote: 5
Read: Download Dissertation

Abstract


Superplastic bulging is a typically application for superplastic forming of a blank of material into a part. It is similar to blow molding and vacuum forming. Developing advanced automatically controlling apparatus is very important both in further research and production application.This paper provides a method and apparatus for automatically controlling the pressure based on the pressure-time relationship during superplastic bulging. The method is constituted of three parts: determining relationship between time and pressure system by FEM and numerical simulation, automatically controlling pressure system and data exchanging system. Based on this method, a brand new superplastic bulging apparatus is developed with Programmable Logic Controller and computer. PLC is used as main control unit to automatically control the pressure in accordance with the previously determined relationship between time and pressure during the part is formed. Computer is used to deal with data-processing and data-transmission. Data are exchanged between them through RS-232 serial communication. This apparatus will be suitable for many kind of Superplastic Bulging.This paper mainly discusses three aspects. Firstly, based on the theory of engineering cybernetics and the working of PLC, the project of the system composing and controlling are determined. Then, on the basis of the function demand of the system, the parts of the system are selected and the programs are designed. At last, the system is established with the parts and the programs are tested.

Related Dissertations

  1. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  2. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  3. Equipment Research of the Ship Sewage Treatment,X703
  4. The Roles of Phospholipase C and D in Xylanase-Induced Defense Responses in Suspension-Cultured Rice Cells,S511
  5. The Design of Digital Control System and the Experimental Study of Flow Characteristics of EEV,TH134
  6. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  7. Gantry planer simulation equipment design,TG551.2
  8. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  9. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  10. The Study of the Monitoring System of the Hydraulic Disc Brake,TD534.6
  11. The Design and Implementation of the Automation Management System of Yongchangjing River,TP315
  12. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  13. The Development about Control System of Slack Turning Machine and Vector Control Simulation of Asynchronous Machine,TQ440.5
  14. Real-time Simulation of Low-Voltage Power Line Communication Channels Based on FPGA,TN913.6
  15. Study of the Terry Rapier Control System,TS103.337.3
  16. A Design Study of PLC Elevator Access Control System Based on RFID,TP273.5
  17. The Research of Coal Mine Drainage Automatic Control System,TP273
  18. The Study of Wind Power Hybrid Control System Based on PLC,TK89
  19. Research on Electronic Control System of Mine-used Hydraulic Support,TD355.4
  20. Research on Coal Centralized Selection Control System of Hebi Sixth Factory,TD94
  21. Research and application of blast furnace gas -fired steam turbine blowers,TF321.8

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > High-energy forming
© 2012 www.DissertationTopic.Net  Mobile