Dissertation > Excellent graduate degree dissertation topics show

The Experimental Study of Effect of Different Polishing Methods on Surface Roughness of Flexible Denture Base Material

Author: XuJing
Tutor: ChenXiaoDong
School: Dalian Medical University
Course: Clinical Stomatology
Keywords: flexible denture base polishing surface roughness
CLC: R783.6
Type: Master's thesis
Year: 2011
Downloads: 42
Quote: 1
Read: Download Dissertation

Abstract


Objectives: To evaluate effects of different polishing methods on flexible denture base. some evidence can be provided to choose the fitting polishing method for clinic work .Methods: 90 specimens were randomly divided into 3 groups. Polishing casts are finished with silicon gel wheel ,silicon trimming stone and sand paper roll and polished by cloth wheel with water, polishing wax or polishing brei respectively Surface roughness (Ravalue) of each casting was measured with a profilometre, and observation was made through scanning electron microscope .Data were statistically analyzed .Results: Though three ways of coarse grinding and smooth grinding , there was statistical significant difference (P<0.05) in the surface roughness of group silicon gel wheel, silicon trimming stone and sand paper roll.Observation by scanning electron microscope: Surface roughness of specimens finished through silicon gel wheel ,silicon trimming stone or paper roll were different . there were more cratch on the surface of specimens finished by silicon trimming stone, and the cratch were deeper in group of silicon gel wheel, there were less cratch which were more thinner. the most smoothest surface was obtained in group of sand paper roll polished by cloth wheel with polishing wax and polishing brei .Conclusions: The roughness of flexible denture base was influenced by statistical and mathematical technicians Coarse grinding with sand paper roll ,smooth grinding with polishing wax and polishing brei achieve the smoothest surface which can be available in clinic.

Related Dissertations

  1. Research on Processed Surface Roughness of Ram Hole by Fiber Measuring Technology,TG84
  2. Automatic Identification Based on the Resonant Frequency of the Ultrasonic Power,TG663
  3. DJP-9BC Ultra-Precision Double Sided Polishing Machine Design and Experimental Study,TN205
  4. Experimental Study on the Belt Grinding Mechanism for Aluminum Alloys,TG580.6
  5. Production Process and Service Performance of Non-quenched and Tempered Steel for Plastic Mold,TG335
  6. The Effect of Different Microwave Polymerizations on Accuracy and Physical Properties of Denture Base Resin,R783.6
  7. Comparison of the Physical and Mechanical Properties Among Four Kinds of Die Stone Casts,TQ177.3
  8. Consider deck irregularity affecting road vehicles - bridge coupled vibration analysis,U441.3
  9. Analysis of Vehicle-Bridge Coupling Vibration of Wide Continuous Box-Girder Bridge,U441.3
  10. Comprehensive Evaluation of the Different Basic Periodontal Treatment Techniques,R781.4
  11. Studying for Cutting Performance of Supper-Hard Milling Cutter Based on Multi-Scale Effect,TG54
  12. Research on the Surface Roughness of Mold Material in Spdt,TG51
  13. Preparation of Ultrafine CeO2 CMP Slurry for Semiconductor,TN305.2
  14. Study on Polishing Technology Using Spherical Tool,TG580.692
  15. Experimental Research on Icing Surface Freezing Adhesive Characteristic,V216.51
  16. Influence of Surface Physical and Chemical Properties on Heat Transfer Characteristics of Steam Condensation,TK124
  17. Optimization System of Milling Process Parameter Based on LabVIEW,TG54
  18. Micro-Grinding Performance and Micro-Grinding Tool Wear,TG580.6
  19. Dynamic Simulation of Atomic Diffusion and Evolution Mechanism of Defects in Linear Friction Welding,TG453.9
  20. Ultrsonic Vibration Assisted Grinding of Tungstem Carbide Micro-Cylindrical Array,TG584
  21. Research on Machining Characteristics of Glass by Micromilling,TG54

CLC: > Medicine, health > Oral Sciences > Oral orthotics > PROSTHETIC
© 2012 www.DissertationTopic.Net  Mobile