Dissertation > Excellent graduate degree dissertation topics show

The Fmeca Analysis Based on the Reliability of Loader System and the Satisfactory-Optimization Design and Simulation of Its Working Device

Author: JuChengWei
Tutor: HuangHuaLiang
School: Guangxi University
Course: Mechanical Design and Theory
Keywords: engineering machine loader FMECA analysis working device satisfactory-optimization BP neural network Genetic Algorithms simulation
CLC: TH243
Type: Master's thesis
Year: 2005
Downloads: 364
Quote: 4
Read: Download Dissertation

Abstract


In this thesis, the system reliability of wheel loader was analyzed qualitatively by the method of FMECA and the satisfactory optimization design and simulation of its working device was carried out, in order to validate the rationality of the optimize result.This thesis expounded the actualities and trend of the reliability study of mechanical system, and researched the theories and methods of the reliability distribution. The model of basic reliability and mission reliability about the loader system is built after analyzing the structure of the loader system. The table about the loader system was built with the method of FMECA. The whole loader system、its subsystems and its parts were analyzed qualitatively .The basic faults of the system and the cause productive of them can be ascertained with the help of the table, which save much time and raise working efficiency. At the same time, the reliability of the whole loader system was distributed by the method ofcombining the failure rate with the important degree. And according to the idea of reliability redistribution, the reliability of the loader system was redistributed for insuring the reliability distribution of the loader’s subsystem is correct.In this article, the theory of satisfactory-optimization was used in the design of the working device, geting the results of optimization with the aids of BP neural network and Matlab.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  14. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  17. Numerical Simulation of Biomass Direct Reburning,TK16
  18. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  19. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  20. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  21. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23

CLC: > Industrial Technology > Machinery and Instrument Industry > Lifting machinery and transport machinery > Loading and unloading machinery > Loader
© 2012 www.DissertationTopic.Net  Mobile