Dissertation > Excellent graduate degree dissertation topics show

Dynamics Simulation and Finite Element Anslysis of the Loader Working Device

Author: LiKai
Tutor: ZhuRuiXiang
School: Northwest University of Science and Technology
Course: Agricultural Mechanization Engineering
Keywords: Loader Working device Dynamics simulation ANSYS Improve structure
CLC: TH243
Type: Master's thesis
Year: 2011
Downloads: 140
Quote: 1
Read: Download Dissertation

Abstract


The loader working device’s intensity and stiffness properties directly affect the use reliability and life of the whole products, so the structure design will become the important content of loader integral design. The loader working device is taken as the research object in the thesis to study its kinematic and dynamic simulation and finite element stress analysis, to identify the distribution area of dangerous stress, namely the eccentric loading and ground condition shovel position. Taking it as a theoretical basis to make the structural design of working device in order to get a more reliable and comprehensive program of structural improvements.(1)Model and assemble the loader working device by using three-dimensional modeling software Pro/E, and then got and exported assembly animation.(2)Analysis the loader working condition and the loading manners of external load, and the result is: The insert resistance 245391.81N and shovel dug resistance 361464.88N when symmetric loading; The insert resistance 101039.57N and shovel dug resistance 148838.48N when eccentric loading. After establishing loader working device virtual prototyping model by ADAMS simulation software, did the dynamic simulation and analysis of each operating movement of the device, and then exported the dynamic simulation animation. The results showed: After the work of taking back the bucket, the rise force of turn fights oil cylinder was always more than arm oil cylinder’s, which showed it won’t happen poured over; In the eccentric loading method, the force of the device system was bigger; Every hinge point borne the maximum force value at the ground shovel dug conditions; so the thesis chosen the eccentric loading method ground and shovel dug conditions as research object in finite element analysis drafts. In the simulation results data, the maximum stress of below arm hinge point approximates 1500kN.(3)Established a simple dynamics structural model. Through the calculation method of the mechanics of materials, every component of device was calculated so as to get load numerical of the maximum stress condition. From the results: the maximum stress value of below hinge point arm is 1510.3kN, which was close to the simulation calculation 1500 kN. Using the finite element resolution software, we analysed the arm framework with finite element method, and found the dangerous stress concentrated in upper and lower parts of arm board which was slanting load and the inside surface of reaming joint, stress range between 948.37 MPa and 632.32 MPa. The stress of welding parts between beam and arm board had exceeded yield limits(345MPa), this position easily happens fracture. The maximal deformation was lower hinge point whose eccentric loading force was larger ,and the maximum deformation was 17.531 mm.(4)According to the results of finite element analysis, the thesis put forward improved modification scheme of arm framework structure and did the finite element analysis on the improved structure. The results showed: In the improved structure, the maximal deformation of the below arm board hinge point shrunked to 11.9 mm; The dangerous stress concentration areas of the upper and lower parts of arm board decreased obviously, and stress range drop to 316.3 MPa - 623MPa;The stress of welding parts between beam and arm board completely disappeared.

Related Dissertations

  1. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353
  4. FEA Analysis for Contact Roller of Sanding Machine,TS64
  5. The Analysis Research and Design of Backstop Roller Based on Virtual Prototype Technology,TH222
  6. The Analyse and Countermeasures Study on the Balance of Energy Supply and Demand in the Period of "12th Five-Year Plan",F426.2
  7. Research and Manufacture of SZL1000/300 Hydraulic Support Test-Bed,TD355.4
  8. The Finite Element Analysis and Simulation of Excavator Working Device,TU621
  9. Study of the Structure of Wall-Inspecting Robot on Chemical Container in Service,TP242
  10. Study on Geometric Characteristics and Fininte Element Anslysis of Hositing Ropes,TD532
  11. Slope Finite Element Generalized Reliability Algorithms,TD824.7
  12. Dynamic Characteristic Simulation and Study of Sliding Coal Plow,TD421.62
  13. The Analysis on Tourism Industry System of Huludao,F224
  14. Research on the Development of the Digital Mock-up and Functional Simulation of the Entire Cross Section Mechanical Boring Machine,TD421.5
  15. Study of Mechanical Property on Special-shaped Girder Cable-Stayed Bridge,U448.27
  16. The Research on Speed-adjustment System of Shearer Haulage Unit and Key Parts’ Optimization,TD421.6
  17. Numerical Simulation Research on Optimal Milli-second Delay Time with Many Free Surfaces Hole by Hole Blast,TD235
  18. Finite Element Simulation and Research of Fine-blanking and Die Clearance,TG386
  19. Welding Research and Application of sump pumps based on the finite element analysis software,TG457.2
  20. Research on Static Magnetic Field and Torque Characteristics of Hybrid Stepper Motor Based on ANSYS,TM383.6

CLC: > Industrial Technology > Machinery and Instrument Industry > Lifting machinery and transport machinery > Loading and unloading machinery > Loader
© 2012 www.DissertationTopic.Net  Mobile