Dissertation > Excellent graduate degree dissertation topics show

The Simulation of the Front of Body Structure Static Strength Analysis and Dynamic Analysis

Author: ZhangZhiGuo
Tutor: YuDuoNian
School: Jilin University
Course: Art of Design
Keywords: FEM(Finite Element Method) Body Structure ABAQUS Static Strength Dynamic Analysis
CLC: U463.8
Type: Master's thesis
Year: 2005
Downloads: 459
Quote: 5
Read: Download Dissertation

Abstract


Automotive industry is a technology-intensive and matured industry; it is a good carrier for many leading techniques. Also we know that the product development is the kernel of automotive technology. With more than ten years’improvement, the improvement of integrated technology has a large speed and keeps along with the international advancement. The technique of computer and the technique of information have been used in automotive design and development wider and wider. From “throwing off the T-square”to 3D digital design, we have stepped into a new area in new product development process. Today CAE is being used in the design of body structure in many ways. The finite element analysis technique is becoming the main way for the design of body structure, It promote the compete of product, shorten the exploitation cycle of product , low exploitation expense . In the chapter one, the paper introduce the characteristic of modern body design, and CAE apply in the body design .the finite is a basis method in body design. In the chapter two, the paper reviews the development of the finite element analysis, some basic theories and concepts about the finite element analysis were introduced. There are some summarizes, such as how does the person use the finite element analysis in body structure design? What is the basic program in body design? In the chapter three, the work is to set up the finite cell which bases on the CAD models. Try to reduce the workload of the finite models, and gets some

Related Dissertations

  1. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  2. S-lay Installation Analysis for Deepwater Pipeline,TE973
  3. Leak before break (LBB) method in the PWR Pipeline Analysis Application,TL353.11
  4. Transmission towers 100m above study of wind load factors,TU311.3
  5. Fluid Dynamics Analysis and Research on the Spray Bar of Electrostatic Oiler,TG174.4
  6. Load Carrying Capacity of T Beam Strengthened with CFRP Sheets on the Flange,TU375.1
  7. The Tire Braking Performance Simulation Analysis and Experiment Evaluation,TQ336.1
  8. Studies on the Character of Carbon Storage for Tree Layer Dynamics in Yongchun,S718.5
  9. Numerical Simulation of High Pressure Cylinder Necking Plastic Forming and Defect Prediction,TH49
  10. The Research on Track Irregularity Caused by Settlements of the Light-rail Bridge Pier,U213.2
  11. Study on the Law of Ground Settlement with Shield Driven Method in Ningbo Area,U455.43
  12. Research on Foundation Structure Security of Offshore Wind Turbine Based on ABAQUS,P752
  13. Coupling Dynamics Response Research for Mono-Pile Offeshore Wind Turbine,P75
  14. Research of Motion Response of Deep-sea Mining System,TD424
  15. Numerical Simulation and Experimental Verification of Joule Effect in Gleeble Thermo-Mechanical Simulating Tests,TB302
  16. Material Composition and Structure Study of Ultra-thin Asphalt Concrete Pavement in Wuhan,U414
  17. Performance-based Probabilistic Seismic Demand Analysis of Bridge Structures,U442.55
  18. Dynamic analysis based on multi-core acceleration method,TP332
  19. Research Bed masonry walls,TU352.11
  20. Magnetic field double wire submerged arc welding heat Numerical simulation and experimental study,TG445
  21. Optical fiber sensing technology to monitor steel cement mixing wall Applied Research,TU753

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Cab and body
© 2012 www.DissertationTopic.Net  Mobile