Dissertation > Excellent graduate degree dissertation topics show

Pneumatic Conveying System Design and Research Experiment

Author: LiuZengXiang
Tutor: ZhouJianXun
School: Nanjing University of Technology and Engineering
Course: Precision instruments and machinery
Keywords: pneumatic conveying system PLC DCS conveying technique course mix rate
CLC: TH232
Type: Master's thesis
Year: 2005
Downloads: 504
Quote: 4
Read: Download Dissertation

Abstract


At present time, in many power plants, the method of transporting the pulverous coal ash using pneumatic conveying system is very popular and already has a widely application. However, many problems have also appeared during this application, in order to perfect the current pneumatic conveying system and the conveying techniques, based on an actual experiment using project, this paper will give an illustration about the general design course on the pneumatic conveying control system、 the system control methods and its conveying techniques.Firstly, this paper gives a basic explanation on the pneumatic conveying technology, and also has an analysis on several factors that have an important effect on the pneumatic conveying system; Secondly, according to the appeared problems of the currently used pneumatic conveying system and the function demands of the experiment using pneumatic conveying system, this paper has an explanation on the system’s general design course, stressfully expounds a scheme of two layer control mode, in this mode, a series of PLC (Programmable Logic Controller) and a computer are used to form a DCS (Distributed Control System); Then, connecting with the factors affecting the pneumatic conveying system, this paper gives a detailed explanation about the design course of the system’s hardware and software when the system is working on the above-mentioned control mode.During the course of the pneumatic conveying system’s field practice, in view of the compressed air’s volume used in different conveying technique courses are widely different. In order to saving the compressed air and improve the conveying efficiency, as an example of this experiment system, by using the pulverous coal ash, several experiments on the conveying techniques are performed. Detailed speaking, this paper gives five different pneumatic conveying technique courses, and many times of experiment are made for every technique course. During every experiment, the computer collects the analogue dates and saves them on the computer. These collected dates are analyzed and disposed by using the software of MATLAB. In this way, the best pulverous coal ash pneumatic conveying technique course and a basic method of implementing adjustable control on the control system to make the pneumatic conveying system transport the pulverous coal ash and the air at a high mix rate persistently are concluded.

Related Dissertations

  1. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  2. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  3. The Roles of Phospholipase C and D in Xylanase-Induced Defense Responses in Suspension-Cultured Rice Cells,S511
  4. Design and Implementation of Oxygenerator DCS Control System,TQ116.11
  5. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  6. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  7. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  8. Analysis and Application in Automated Balace of Heating System Based on PLC Control,TU995.3
  9. Design of Intelligent Supervisory Control System for Wastewater Treatment,TP277
  10. Design and Realization of Envrionmental Control Systems for Testing Plant,TP273
  11. Research on Automatic Measurement Technology of Pitch Diameter for the Rzeppa Joint Housing Raceways,TG80
  12. Fuzzy Control System Design of Transformer Cooler,TP273.4
  13. Research on Maintenance Decision Optimiztion and Risk Analysis for Thermal Power Plant’s DCS,TM621.6
  14. Network planning technology projects in the DCS optimal allocation of resources in applied research,TU721.3
  15. Study on the Asphalt Quick Heat Equipment,U415.5
  16. Research and Application on DCS of Circulating Fluidized Bed Boiler,TP273
  17. Improved BP Neural Network in a single blow particles of magnesium desulphurization Applications,TF704.3
  18. Computer Control of Batch Synthetic Process of Triazophos,TQ265.11
  19. Digital distribution networks planning,TM73
  20. Research on Operating Simulation of Circulating Fluidized Bed Boiler Training,TK229.66
  21. Research and Implementation of Monitoring and Controlling System for CFBB Multi-function Test-bed,TK223.6

CLC: > Industrial Technology > Machinery and Instrument Industry > Lifting machinery and transport machinery > Transport machinery > Pneumatic conveyor
© 2012 www.DissertationTopic.Net  Mobile