Dissertation > Excellent graduate degree dissertation topics show

Analysis on Flexural-Torsional Buckling of Simply-Supported Tapered I-Section Beams

Author: GuoYu
Tutor: DaiSuJuan
School: Shandong University of Science and Technology
Course: Structural Engineering
Keywords: Tapered section flexural member parameter analysis regression analysis
CLC: TU392.5
Type: Master's thesis
Year: 2011
Downloads: 33
Quote: 0
Read: Download Dissertation


The lightweight steel portal frame structure has been extensively used in the industry and civil buildings in recent years, because of the rational force bearing, large numbers of tapered members appear in this kind of structure. Many scholars have made researchs about the tapered beams, some equations have been listed for tapered beams by domestic codes and regulations, but problems exsist, for example, bad calculation accuracy、conservative calculation result、economics deficiency, and should be made further research.The article includes three parts, the first part compared and analysed the equations of tapered beam stability in<Technical specification for steed structure of light-weight Buildings with gabled frames>(CECS 102:2002)、<Stability of Steel Structures Theory and Design> and EC3 (Eurocode 3:Design of steel structures), and made supplementation about the taperesd beams which is not mentioned in EC3 for analysing and acculating elasto-plastic flexural-torsional buckling critical load of tapered beam.The second part established the finite element model of tapered beam in the range of large-deflection and elastoplasticity by applying the theory of nonlinear finite element and ANSYS. The results of bearing capacity、buckling mode and stress distribution.The third part got the finite element results of stability bearing force by changing the flange width-thickness ratio、ratios of height to thickness of web and web tapering ratio, discussed effect of geometric parameter for the elastoplastic stability bearing capacity of tapered beams, and fited the reduction coefficient by SPSS16.0 At last compared the results of finite element calculation with the results of modified EC3 and other two equations.From the analysis above, the modified equation has higher calculation accuracy than the other two equations, is economic and the error is within the applicable range,so it can be an important reference for the calculation of tapered beams.

Related Dissertations

  1. Rural household income and spending on higher education Relations,G649.2
  2. Ketones 3D-QSPR study,O641
  3. Application of the Modern Surveying Data Processing Technology in Estimation of Energy Demand,P25
  4. Based on Data Mining Technologies in Urban Water Supply Analysis and Decision,F299.24;F224
  5. Acoustic Emission Detection Technology in Applications of Synthetic Diamond Research,TQ164
  6. Relationship of the corporate ownership structure , scale and technological innovation,F224;F273.1
  7. Study of Influential Factors of Shanghai Social Workers’ Burnout and Their Countermeasures,D669
  8. Optimization of the process parameters of the cigarette filter rod forming equipment opener,TS43
  9. Some Research on Regression Model with Censored Data,O212.1
  10. Prediction Based on Neural Network for Blending Coal Slurry Ability,TQ534.4
  11. Analysis for Intermittent Fixed-Bed Coal Gasification,TQ546
  12. The Research on the Dynamic Early-Warning of Credit Risk Based from the Commercial Banks’ Perspective,F830.33
  13. Retail moral hazard perception impact study on consumer behavior,F274;F224
  14. China 's private listed company equity refinancing Performance Study,F832.51
  15. Chengdu urban and rural residents ' behavior on phone,C912
  16. Front-line police Burnout and Personality Traits Correlation,C912.6
  17. Peasant Workers Training Wishes and the Affecting Factors Analysis Based on the Investigation of Fuzhou,F224
  18. The Study on the Relationship between the Condition of Rural Teachers and Elementary Education Quality,G525.1
  19. Relative Factors of Hypoglycemia in Newborn Infants,R722.19
  20. Clinical Features and Preliminary Factors Study of Feeding Intolerance in Preterm Infants,R722.6
  21. Study Internal Force of Curved Rigid Frame Bridge with Cantilever Construction Method,U448.42

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Various types of steel > Light steel
© 2012 www.DissertationTopic.Net  Mobile