Dissertation > Excellent graduate degree dissertation topics show

Fabrication of Chlortoluron and Oxytetracycline Sensors Based on Molecular Imprinted Films

Author: JiangFuYang
Tutor: LiJianPing
School: Guilin University of Technology
Course: Analytical Chemistry
Keywords: Molecularly Imprinted Chlortoluron Oxytetracycline Electro-Synthesized Enzyme Amplifiers Electrochemical Sensors
CLC: TP212.2
Type: Master's thesis
Year: 2010
Downloads: 92
Quote: 0
Read: Download Dissertation

Abstract


In part one, two electrochemical sensors were propsed by electro-synthesized and chemical polymerization in aqueous based on the recognition function of molecular imprinted film.（1） Molecularly imprinted polymer （MIP） was prepared by a reaction among template molecules of chlortoluron, functional monomers of methacrylic acid, and a crosslinker of N,N’- methylenebisacrylamide on platinum electrode in acid solution. While potassium ferricyanide was worked as the probe, cyclic voltammograms （CV）, Infrared spectroscopy （IR） and AC impedance spectroscopy （AC） were performed to characterize and study the molecular imprinted film. Differential pulse voltammograms （DPV） was carried out to build a method for chlortoluron detection. Chlortoluron could be analyzed in the range of 0 to 3×10-6 mol/L with a detection limit of 2.21×10-8 mol/L. Water samples were assayed and recoveries were obtained, ranging from 99% to 102%. （Chapter 2）（2） Molecularly imprinted films （MIP） were prepared for the determination of chlortoluron by electropolymerization method on gold electrode, and it’s imprinting effect, performance and compared with the selective response of similar material of chlortoluron were studied in this work. Differential pulse voltammograms（DPV） was carried out to build a method for chlortoluron detection. Chlortoluron could be analyzed in the range of 3×10-7 to 1.5×10-6 mol/L with a detection limit of 1.0×10 -7 mol/L mol/L. Water samples were assayed and recoveries were obtained, ranging from 99.0 % to 107.3 %.（Chapter 3）In part two, oxytetracycline molecularly imprinted sensors were propsed by electro-synthesized based on the recognition function of molecular imprinted film. Two method for trace oxytetracycline detection were established based on enzyme amplifiers.（3） A novel strategy for preparing highly sensitive molecularly imprinted sensors based on enzyme amplifiers was proposed for oxytetracycline （OTC） determination. A molecularly imprinted film was used as an artificial antibody to interact with OTC and horseradish peroxidase labeled OTC （abbr. HRP-OTC）. Afterwards, OTC was determined according to the competition reaction. The molecular imprinted sensor was characterized by Fourier transform infrared spectroscopy （IR）, alternating current （AC） impedance spectroscopy, differential pulse voltammetry （DPV）, and cyclic voltammetry （CV）. The DPV technique was performed to verify the voltammetric behavior of the molecular imprinted immunosensor. At concentrations of 0 1.0×10-7 mol/L, OTC could be determined with a detection limit of 6.49×10-10 mol/L. The MIP immunosensor showed high sensitivity, selectivity, and reproducibility. Milk samples were assayed and recoveries were obtained, ranging from 98.2 % to 101.5 %. （Chapter 4）（4） A novel strategy for preparing highly sensitive molecularly imprinted sensors based on enzyme amplifiers was proposed for oxytetracycline （OTC） determination. A molecularly imprinted film was used as an artificial antibody to interact with OTC and glucose oxidase labeled OTC （abbr. GOD-OTC）. Afterwards, OTC was determined according to the competition reaction. The molecular imprinted sensor was characterized by Fourier transform infrared spectroscopy （IR）, alternating current （AC） impedance spectroscopy, differential pulse voltammetry （DPV）, and cyclic voltammetry （CV）. The DPV technique was performed to verify the voltammetric behavior of the molecular imprinted immunosensor. At concentrations of 0 3.6×10-7 mol/L mol/L, OTC could be determined with a detection limit of 4.30×1010 mol/L. The MIP immunosensor showed high sensitivity, selectivity, and reproducibility. Milk samples were assayed and recoveries were obtained, ranging from 98.8 % to 103.3 %. （Chapter 5）

Related Dissertations

  1. Study on Synthetic of BINOL, Amino Acid and Derivatives Molecularly Imprinted Polymers and Their Application in the Chiral Resolution,O631.3
  2. Molecularly Imprinted Polymer Microspheres and Evaluation,O631.3
  3. For drug ingredients isolated molecularly imprinted polymer microspheres preparation , properties and application of testing,O631.3
  4. Imprinted Polymer Preparation and application of solid-phase extraction,O631.3
  5. Preparation of Phenol Molecularly Imprinted Polymers on the Surface of Silica and Its Application in DGT Technique,O621.2
  6. Research of Molecular Imprinted Electrochemical Sensor for Paracetamol,TP212.2
  7. Research on Controlling Antibiotic Residues Inhibitors during Anaerobic Biotreatment,X703
  8. Preparation of Quinolones Molecularly Imprinted Polymer Microspheres and Study of Its Specific Adsorption Performance,O631.3
  9. Preparation and Characteristics of Silica Surface Molecularly Imprinted Polymer for Gasoline Desulfurization,O631.3
  10. Research on the Synthesis and Properties of EGCG-molecularly Imprinted Polymer,O631.3
  11. Preparation of Molecularly Imprinted Polymers Via Atom Transfer Radical Polymerization,O631.3
  12. Study on Preparation of Norfloxacin Molecularly Imprinted Polymers and Its Application in Solid Phase Extraction Technology,O631.3
  13. Study on Preparation and Application of estradiol-imprinted Microspheres Using Modified Precipitation Method,O631.3
  14. Synthesis and Molecular Recognition of Flavonoids Functional Factors of Traditional Chinese Medicines-Imprinted Polymer,O631.3
  15. Study on the Preparation Methods and Recognition Properties of Fluoroquinolones-Molecularly Imprinted Sol-Gel Sorbents,TQ424
  16. Molecularly Imprinted Hydrogel Microspheres in Response to Sustained Drug Delivery,TQ460.1
  17. Response of Imprinted Photonic Crystals for Nicotinamide in Aqueous Solution,O621.2
  18. Study on the Preparation and Characters of Molecular Imprinting Polymers,O631.3
  19. Preparation and Application of Emodin Molecular Imprinting Polymers,O631.3
  20. Study on Analysis of Melamine and Synthesis of Melamine Molecular Imprinting Polymers,O631.3

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Chemical sensors
© 2012 www.DissertationTopic.Net  Mobile