Dissertation > Excellent graduate degree dissertation topics show

Obstacle-Climbing Analysis and Control System Design for Leg-Wheeled Mobile Robot

Author: FangYuJi
Tutor: DuZhiJiang
School: Harbin Institute of Technology
Course: Mechanical and Electronic Engineering
Keywords: leg-wheeled mobile robot kinematics obstacle-climbing analysis obstacle-climbing motion planning control system
CLC: TP242.2
Type: Master's thesis
Year: 2010
Downloads: 191
Quote: 0
Read: Download Dissertation

Abstract


Along with the development of society,people have become increasingly rely on equipment.The quick deployment of modern warfare and rapid relief after disasters put forward higher request to transportation equipment.They asked transportation equipment have high flexibility and adaptability to the environment of complex structure of terrain,and can succeed, quickly complete given task.Combined with the”leg-wheeled mobile robot”project,the obstacle-climbing capability and the control system are introduced in this paper.Specific research work are as follows.Based on the analysis of outdoor robots walk institutions function and design requirements,walking mechanism of the leg-wheeled mobile robot is designed.The robot composed by the body and six leg-wheeled systems. Leg-wheeled system use modular design and easy disassembly. The mechanical and electrical interface between leg-wheeled system and body is exactly the same and can interchange directly.According to the function requirements of robot,the motor power demand of the robot in different stages is analyzed and the appropriate driver motor is selected.The kinematics model of plane,spatial kinematics posture and special kinematics posture are established.These provided the basis for the trajectory tracking and obstacle-climbing motion plannning. Obstacle-climbing motion is planned for the typical terrain of vertical obstacles and ditches.With the geometric method and stability constraints, the obstacle-climbing capability is analyzed.Finally,using the ADAMS,the obstacle-climbing motion planning is simulated and its feasibility is proved.Masterslave control system is built.Using the USB-CAN Adapter,the CAN communication between up and down computer is achieved and the motor controller is designed with TMS320LF2407A DSP and EPM3128 CPLD. Using VHDL language, CPLD acquisition and processing signal of encoder and the SPI communication with DSP is realized.The speed servo control for drive motor and position servo controll for swing arm motor is achieved. Motor drive is designed with LMD18200. In order to increase the reliability of the wheel support,the brake is installed and its drive is designed.Finally, the debugging and commissioning of the robot is completed. Through the obstacle-climbing experiment for vertical obstacles and ditches, the flexibility of walking mechanism,the feasibility of obstacle-climbing motion planning and the correctness of obstacle-climbing capability analysis is proved.

Related Dissertations

  1. Design and Fault Diagnosis of the Coarse Pointing Control System in Satellite Laser Communication,V443.1
  2. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  3. The Inductive Load Based Vehicle Body Network Control System,U463.6
  4. Research of Predictive Control in Water Treatment Plant Based on Neuron Network,TP273.1
  5. Infrared Imaging Target Simulation Resistance Array Control System Development,TJ765.4
  6. Research on Attitude Control Law of Endo-Atmospheric Missile,TJ765.23
  7. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  8. Modeling Analysis and Slip Estimation for Lunar Rovers,TP242
  9. Mechanism Design and Kinematic Simulation of a Celiac Invasive Surgical Robot,TP242.3
  10. Research on Control System and Head of 7-Axis NC Fiber Placement Machine,TG659
  11. Research and Design of One Kind of Paper’s QCS That Based on Embedded System,TP368.1
  12. Research on Key Technology of Recycling Horizontal Subsea Pipe Conector,TE973
  13. Eleventh National Games men's Triple Jump Triple Jump Technique kinematic analysis,G823.4
  14. With backlash compensation function of radial tire building drum,TQ336.1
  15. Virtual Human Motion Simulation,R318.0
  16. Internal Control System Construction of University Research,G647
  17. Kinematics Analysis on the Final Delivery Techniques of Women Discus Athletes in the 11th National Games,G824.2
  18. The Research of Pledge Supervision Risk Control in Inventory Financing,F259.27
  19. Study of the Structure of Wall-Inspecting Robot on Chemical Container in Service,TP242
  20. Software Approach to Implement Power Optimization in Embedded Handheld Mobile Gis Device,TP311.52
  21. Research and Practice of a Monitor and Control Software System Suitable for Use in Heterogeneous Computing Enviorment,TP277

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot > Industrial robots
© 2012 www.DissertationTopic.Net  Mobile