Dissertation > Excellent graduate degree dissertation topics show

Dynamic Analysis and Optimum Design of Reinforced Concrete Frame Structure for a Factory Building

Author: ZuoLunHai
Tutor: YangZhiYong
School: Wuhan University of Technology
Course: Structural Engineering
Keywords: Finite Element Dynamic testing Modal Analysis Dynamic analysis Structural optimization design
CLC: TU375.4
Type: Master's thesis
Year: 2005
Downloads: 252
Quote: 1
Read: Download Dissertation

Abstract


This article provides an overview of the status, characteristics and significance of the study of the structural vibration problems , structure optimization design theory and its application in the works . Using the finite element method , the theory of structural dynamics and large - scale finite element calculation software - ANSYS , combined with the vibration of the frame structure of the Taishan Cement Plant classifiers workshop reinforced the investigation at the scene , on the basis of the dynamic test , around how to avoid the plant structure resonance , to reduce the structural vibration amplitude structural dynamic analysis and the establishment of a large number of structural reinforcement model analysis , dynamic optimization . The main results of this paper are as follows : 1 , using the spectral analysis method to analyze the spectral characteristics of the field data , to grasp the structure of the vibration frequency of the vibration source and structural vibration law . Were established before and after the reinforcement of the finite element model and flat-slab model to study the structure of the dynamic characteristics , and explore the structure of the resonance , with reference to entity model calculations of flat-slab model stiffness correction . 3, the use measured vibration source frequency sine wave equivalent incentive model role in the structural quality points , the dynamic stiffness correction after the flat-slab model , Finally, comparing the calculation results , assess the structural damping effect . 4 , the establishment of a large number of reinforcement model , using ANSYS optimization module to optimize the analysis ; compare the design of optimal solution , considering the economic structural reinforcement , applicability , feasibility and effectiveness , choose reasonable optimization program ; sensitivity at the same time analysis , given the sensitivity curve of the typical design , provide the basis for further adjustment of the structural parameters . A comprehensive summary of the research of this article , on the subject of the further deepening of the study recommendations .

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  5. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  6. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  7. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  8. The Study of Dynamic Simulation of the Passive Dynamic Quasi-Quarupedal Walker,TP242.6
  9. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  10. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  11. Design of Testing Equipment for Electronic Products,TN06
  12. The Effectr of Lactic Acid Bacteria and Rice Bran on Dynamic Change of Rice Straw Silage Fermentation,S816.53
  13. Isolationand Identification of Porcine Parvovirus and Parts of Its Biological Characteristics,S852.65
  14. S-lay Installation Analysis for Deepwater Pipeline,TE973
  15. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  16. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  17. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  18. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3
  19. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  20. Different Bottom Structure of Dental Brackets Affect the Adhesiveness-Three Dimensional Finite-element Analysis,R783.5
  21. Airborne radar antenna pedestal rapid design systems research and development,TN959.73

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures > Frame
© 2012 www.DissertationTopic.Net  Mobile