Dissertation > Excellent graduate degree dissertation topics show

Intelligent Vibration Control system design and commissioning roller

Author: YuHongLin
Tutor: ZhangZuo
School: Chang'an University
Course: Mechanical and Electronic Engineering
Keywords: Intelligent Vibratory Roller CAN bus Control Debugging
CLC: U415.521
Type: Master's thesis
Year: 2005
Downloads: 134
Quote: 1
Read: Download Dissertation

Abstract


In this paper, preliminary research group research, the intelligent control system of vibratory rollers as well as hardware and software design and debugging. Through access to relevant information , the analysis of the impact of vibration compaction mechanism and the effect of vibratory compaction on the basis of various factors , first clear the intelligent control system components vibratory compactor , control functions and requirements ; Then, according to the specific roller control system features, combined with CAN bus technology, analysis and comparison of several different control schemes , and ultimately determine the SPT-K-2023A controller and SPT-X-2025 display components roller control system solutions , and other hardware systems accordingly the design and renovation ; various parts of the control system for the specific control requirements, the design of the various parts of the control flow , and the preparation of the corresponding control program that adds a new control algorithm ; Finally, with the actual construction , the prototype on debugging the control system to further modify the problems existing in the system , optimizing the part of the control program , the control algorithm used by the tuning parameter ; final validation of the feasibility of the control scheme , to achieve a variety of control functions and achieve current control requirements.

Related Dissertations

  1. K Company’s Improving Planning and Forecasting for the Reasonable Allocation of Inventory,F224
  2. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  3. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  4. Model of Cylinder Controlled by On-Off Valve and System of PWM Control,TH138
  5. The Key Technologies of Autocollimation System Based on the Beam-Splitting Target Detecting Feedback of Laser Beam Shift,TH741.14
  6. Design and Application of Scope Anti-Shake System,TH743
  7. Design and Research on Stabilization Loop of Gyro Stabilized Pod Control System,V241.5
  8. Attitude Control of a Three-Axis Stabilized Satellite,V448.22
  9. Realization of Fiber Optic Gyroscope Signal Processing Circuits Based on FPGA,V241.5
  10. Design and Fault Diagnosis of the Coarse Pointing Control System in Satellite Laser Communication,V443.1
  11. Satellite Attitude Control Methods Using Only Magnetorquers,V448.222
  12. Robust Adaptive Control Algorithms Research for the System of Spacecraft Attitude Dynamics,V448.22
  13. Research on the Attitude Controller Design and Control Strategy of High Altitude Platform,V249.1
  14. Parametric Approach of Active Control Technology for Tailless Flying-Wing Aircraft,V249.1
  15. Attitude Control Law Design Based on Blended Lateral Jets and Aerodynamic Control,V249.1
  16. Attitude Determination and Finite Time Control Algorithms for a Satellite,V448.222
  17. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  18. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  19. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  20. Study on the Locomotive Dynamic Supervision System,U284.48
  21. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9

CLC: > Transportation > Road transport > Road works > Road construction > Construction machinery and equipment > Road construction machinery > Road paver , roller
© 2012 www.DissertationTopic.Net  Mobile