Dissertation > Excellent graduate degree dissertation topics show

Set Finite Element Method and Application Based on Response Surface and Optimization Theory

Author: SunJinHui
Tutor: LaiGuoWei
School: Wuhan University
Course: Hydraulic Structure Engineering
Keywords: set FEM non-probability convex model response surface FEM optimization theory
CLC: TU311
Type: Master's thesis
Year: 2005
Downloads: 411
Quote: 0
Read: Download Dissertation

Abstract


The traditional stochastic relibility method is an important tool to handling with uncertainties, and is widely used in engineering. Yet stochastic reliability method is strongly depends upon the available information, but in engineering, often only limited information is available, which greatly restricts the applications of stochastic reliability method in engineering. However, the convex model only requires the bounds of uncertainties. This makes the convex model an alternative way to analyze uncertainty when a limited amount of information is available. This text has proposed the method of set finite element based on non-probability convex model theory in term of solving practical problem of the project, and has set up non-stochastic reliability theory on this foundation. The detail contents were as follows.(a) Based on the convex modeling of uncertainties, some arithmetic rules for fuzzy cariables were developed.(b) Concrete to introduce several algorithm of reliability response surface FEM and constrained optimize algorithm, combine this text actual conditions is it respond surface FEM algorithm and optimize algorithms to select for use, and has realized respond surface equation calculation and optimization operation in ANSYS and MATLAB software.(c) A new non-probabilistic reliability theory for structure was founded. A non-probabilistic reliability model based on interval analysis was presented. A procedure for non-probabilistic reliability analysis of structure were put forward. We also compared the presented non- probabilistic reliability method with the traditional stochastic reliability method in the modeling of uncertainties, formulations for computation, and reliability design of structures, etc. Alike with the convex modeling of uncertainties, the presented method requires less for available information than probabilistic method, thereby, which provided a possible choice for the reliability analysis and design of structures when availableinformation is lack or limited.(d) The uncertain parameters of structures are expressed by non-probabilistic convex model. By means of combining convex model with response surface FEM and optimization theory,the set FEM for structure uncertainty analysis is presented. Commonly more used non-probability convex model.(e) Assemble set FEM with non-probabilistic reliability theory combine, propose the reliability measurement method based on set,rFEM. The presented method can solve the reliability problem with uncertain data information less and parameter probability can’t be provided.There is an important meaning to analyse about the uncertainty of the large-scale complicated structure.(f) Use set FEM and reliability measurement method proposed to analyse to the actual project some concrete gravity dam draw the fetching value ranges of the stress , safety coefficient , the influence on quantity of responding of the uncertain parameter, the susceptibility analysis of the parameter and dependability index.

Related Dissertations

  1. Communication constraints quantitative estimation system design and analysis,TP273
  2. Research of Internet Congestion Control Mechanism and Stability Analysis,TP393.06
  3. Study on Outburst Prevention Mechanism and Injection Parameters Optimization of Hydraulic Extrusion,TD713
  4. The Study on Load Curtailment Optimization in Urban Electric Network,TM715
  5. Closed-loop supply chain pricing model,F274
  6. Developing Second Best Institutions: A Competition Policy That Fits China’s Mode of Development,D922.294
  7. CDN content distribution network optimization Method,TP393.02
  8. Study on Drawing Forming Process of High-strength Steel Based on Controllable Drawbead,TG386
  9. Application of the Method of Response Surface FEM Apply in Girder Transfer Story,TU311.4
  10. Capacity spectrum method based on the structure of non-probabilistic reliability,TU311.2
  11. Model Updating Research of a Test Cable-stayed Bridge,U448.27
  12. A Study on Value Enhancement of Urban Residential Communities Based on Optimization Theory,F293.35
  13. The Research on Wireless Mesh Network Router Placement and Resaurce Allocation,TN929.5
  14. Virtual Design and Numerical Analysis on Cylindrical Gear Rolling Process,TG61
  15. Peer-to-peer network queries Mechanism,TP393.02
  16. Support Vector Machine Prediction of Coal Reservoir Permeability,TP18
  17. Study on Reasonable Cable Forces under Dead Load for Special-Shaped Steel Cable-stayed Bridges,U448.27
  18. Robust Optimization Based Minimum Dynamic Compliance Subjected to Periodic Loading,TU311.3
  19. Study on Optimization Theory and Application of Ansys Program in Bridge Optimal Design,U442.5
  20. City Logistics Distribution System Optimization Research,F252
  21. The Optimal Supply Chain Performance Management and Collaborative Model,F274

CLC: > Industrial Technology > Building Science > Building structure > Structure theory to calculate > Structural Mechanics
© 2012 www.DissertationTopic.Net  Mobile