Dissertation > Excellent graduate degree dissertation topics show

Investigation of Compressor Stability with Distortion by Inlet Insert-board

Author: LuoBiaoNeng
Tutor: HuJun
School: Nanjing University of Aeronautics and Astronautics
Course: Aerospace Propulsion Theory and Engineering
Keywords: compressor stability assessing insert-board distortion
CLC: V233
Type: Master's thesis
Year: 2006
Downloads: 145
Quote: 1
Read: Download Dissertation

Abstract


To study the aircraft-engine stability assessing technology about total-press distortion, four different structure insert-boards and testing schemes are designed, based on the technology of Russian insert-board distortion and assessing compressor stability of English and USA. The low speed compressor (LSC) at College of Energy and Power in NUAA is used to carry out the all insert-board distortion experiments studies. Use commercial software NUMECA to calculate the flow-field of the inlet of the LSC with an insert-board, and analyze the flow-field. Also a PIV (Particle Image Velocimetry) flow-field testing scheme is designed, but have not been carried out for some reasons, for reference only.The collection of illustrative plates of air interface plane (AIP), steady index, unsteady index, synthesized index and the loss of the stability margin are given out, and get some valuable results are summarized by analyzing the data. The results of the experiment show that the synthesized index, unsteady index and steady index inflect the stability margin of the compressor well. And show that the insert-board experiment can get the enough weight in the synthesized index. And also show that the low-press-area of the steady total-press moves along the rotor circumvolving direction. And so on.

Related Dissertations

  1. Study of Mechanism Using Two-Direction Pre-Stress to Control Welding Distortion and Hot Cracking,TG404
  2. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  3. Numerical Study of the Effect with Straight and Bowed Stator in Different Axial Gaps,TH45
  4. Numerical Investigation of Effects of Boundary Layer Suction on the Performance of Diffusion Cascade,TH453
  5. The Research and Realization on Asymmetric Sine Inverter with Adjustable Frequency and Amplitude,TM464
  6. Research on Ionosphere Contamination of High Frequency Radar Echoes and Time-Frequency Analysis Technology,TN958.93
  7. Rate-distortion Optimization Based Rate Control,TN919.81
  8. Packet Loss Recovering Technology for Speech Transmission over Network,TN912.3
  9. Research on Removal Algorithm of Shadows in Image Segmentation,TP391.41
  10. Density Functional Theory Study on the Microscopic Structure of Layered Double Hydroxides Material,TB34
  11. Study on Side Information Generation in Distributed Video Coding,TN919.81
  12. The Study of Stability and Deformation for Cao Mao Mountain Tunnel,U451.2
  13. Design and Application of Centrifugal Compressor Monitoring System,TP277
  14. Research on Mode Decision Algorithm for H.264/AVC Intra Prediction,TN919.81
  15. Research on 4CPFSK Baseband Signal Processing and IC Design Based on DMR Protocol,TN929.5
  16. High Efficiency 3D Video Representation and Coding,TN919.81
  17. A Method for Image Quality Assessment Based on Visual Attention and Structure Distortion,TP391.41
  18. The Aerodynamic Characteristics Research of Top-mounted S-shaped Inlet Based on the Comparison of Two Different Entrance Shape,V211.48
  19. Research of A Practical Nanosecond High-voltage Pulse Power Source,TM46
  20. Distortion effects on image quality evaluation and classification,TP391.41
  21. The Research of Image Restoration Based on Phase Diversity Method,TP391.41

CLC: > Aviation, aerospace > Aviation > Aero-engine ( propulsion system ) > Engine attachment system
© 2012 www.DissertationTopic.Net  Mobile