Dissertation > Excellent graduate degree dissertation topics show

Study of Organic Activated Flux for Sn-9Zn Lead-free Solder

Author: HuangQiSen
Tutor: ZhouLang
School: Nanchang University
Course: Materials Science
Keywords: Lead-free solder Flux Sn-9Zn wettabiltiy Creep
CLC: TG42
Type: Master's thesis
Year: 2006
Downloads: 356
Quote: 2
Read: Download Dissertation

Abstract


Recently, Sn-Pb solders are substituted by lead-free solders are replacing because of human health and the environmental protection and legislations worldwide. Sn-9Zn eutectic solder alloy is a promising candidate for new lead-free solders. However, its wettability is poor. The present work focused on developing a new flux for Sn-9Zn.It was found that, adding 0.5 wt% DMA to ethanol-rosin could remarkably raise its activity and improve the wettabilty of Sn-9Zn to copper when used as a flux. Addition of minor amount of ethylenediamine to the flux can further improve the wettability, and greatly reduce the corrosivity of the flux to Sn-9Zn alloy and substrate. The content of activator in flux has an optimum value: 0.5 wt% DMA & 1 wt% ethylenediamine.Furthermore, we studied the interfacial structure, shear strength and creep strength of solder joints using different fluxes. Joint samples and experimental facility were made by ourselves. The results show that:(1) In the case of using the flux containing two activators, DMA and ethylenediamine, the tensile strength of Sn-9Zn/Cu solder joint is the best, which also indicates the effect of this flux is the best.(2) It was confirmed that the self-made bend-creep tester is simple and reliable.Comparing with using the other fluxes, the bend-creep strength of Sn-9Zn/Cu solder joint is the best by using the flux including two activators, DMA and ethylenediamine.(3) The characters of the interfacial structure are the same when using differentfluxes, expect the thickness of IMC layers have some difference. We can ensure that the fluxes have no influence on interfacial structure, and are impossible to lead to new reliable problems.

Related Dissertations

  1. Powered Activited Carbon-UF for Treating Micro-polluted Surface Water,X703
  2. Generalized Multi-Flux Method for Simulating Directional Radiative Transfer in Participating Media,TK124
  3. Research on an Axial/Radial-Axial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for Hybrid Electric Vehicle,TM341
  4. Methane and Carbon Dioxide Fluxes from Spartina Alterniflora Marsh in Minjiang River Estuary,X502
  5. Plant-mediated Methane Transport and Methane Emissions from Phragmites Australis Marsh in Minjiang River Estuary,X502
  6. Study on Nitrogen and Phosphorus Release Fluxes of Sediment-water Interface in Dutang Reservoir,X524
  7. Research of the Influencing Factors on Constrained Concrete Flexural Member Filled with Steel Tube,TU398.9
  8. Study of Low Speed Control Strategy on Induction Motor Speed Sensorless,TM343
  9. Research on High Temperature Mechanical Behavior of Copper Alloy Materials with Aerospace Power Systems,V250.2
  10. Thermal Field Analysis for Pot of 320t Torpedo Car with Finite Element Method,TF341.5
  11. Research and Design on Control System of 4-D Gripper Based on Creep Characteristics Model of IPMC,TP273
  12. Research on Adaptive Inverse Control for the Hysteresis and Creep Characteristics of IPMC,TP273.2
  13. Study on the Processes of Novel Membrane Bioreactor (MBR) Coupled with Nylon Woven Fabric Filter,X703
  14. Elements Re nickel base single crystal alloy temperature creep behavior of,TG146.15
  15. GH4169G alloy creep behavior of the organizational structure and,TG146
  16. Research on Creep Properties of Reticulate Red Clay,TU411
  17. The Analysis of Momentum Fluxes and Marine Atmospheric Boundary Turbulence Characteristics,P732
  18. The Application of HAMSOM Model on the Study of Internal Tide in East China Sea,P731.24
  19. Studies on the Distributions and Sea-to-air Fluxes of Volatile Halocarbons in the East China Sea, The Yellow Sea and the Northern South China Sea,P734.22
  20. Evaluation of Films Creep Deformation Property by Laser Thermal Stress Method and Simulation of Finite Element,TN249
  21. Distribution Characteristics and the Flux of Land-based into the Sea of Nonylphenols in Jiaozhou Bay and the Ecological Risk Assessment,X55

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding materials
© 2012 www.DissertationTopic.Net  Mobile