Dissertation > Excellent graduate degree dissertation topics show

Study on the Electrode of Perfluorinated Proton Exchange Membrane

Author: WangYaDan
Tutor: LiPeiJin
School: Beijing University of Chemical Technology
Course: Materials Science
Keywords: perfluorinated proton exchange membrane fuel cell membrane electrode assembly 3,3’- dichlorobenzidine
CLC: TM911.4
Type: Master's thesis
Year: 2006
Downloads: 217
Quote: 0
Read: Download Dissertation

Abstract


The perfluorinated proton exchange membrane is a solid polymer electrolyte in polymer fuel cells used in rigorous conditions such as acid, alkali and andoxidant. Because of its excellence performances, it used not only in the key discreteness but in chlor-alkali, electrolysis, electrochemical composites and so on. But the perfluorinated proton exchange membrane is very expensive and is monopolized overseas. Therefore, exploiting the indigenous perfluorinated proton exchange membrane is more important.In this paper, the application of the indigenous perfluorinated proton exchange membrane electrode in the fuel cells was studied. We choose the better indigenous perfluorinated resin in two ones by the analyse of its performances and prepared the composite membrane. The mechanical intension and the dimension stability were advanced. Especially, the performance of fuel cell was the best when the thickness of the membrane is about 20μm.Moreover, in this paper, the application of the perfluorinated proton exchange membrane electrode in the synthesis of 3,3’-dichlorobenzidine was also studied. These results indicate that using ionic exchange

Related Dissertations

  1. Numerical Analysis of Flow Process in a Molten Carbonate Fuel Cell,TM911.4
  2. Study on the Synthesis of the Polypyrrole-Cobalt Oxides and Their Catalytic Behavior for the Electroreduction of H2O2,O643.32
  3. Electricity Generation from Swine Wastewater in Microbial Fuel Cell, Microbial Community Analysis, and Isolation of Electricigens,X71
  4. Preparation and Properties of Proton Exchange Membranes Based on Functional Poly-norbornene,TM911.4
  5. Preparation and Properties of Proton Exchange Membranes Based on Vinyl Addition Polynorbornene Derivatives,TM911.4
  6. Preparation and Research of Novel Pd-based and Pt-based Electrocatalyst for Methanol Oxidation,O643.36
  7. Improvement of Porous Cathode for Intermediate-Temperature Solid Oxide Fuel Cells,TM911.4
  8. Study of SOFC Anodic Nano Composite Powder and Technique for Battery Molding,TM911.4
  9. Electrochemical Behavior of Anodized Mg-Li Based Alloys,TM911.4
  10. Study on Performance Simulation of PEMFC and Reduced-order Method of PDE Model,TM911.4
  11. Design and Research of Protable Digital Product Power Management System Based on Ultra-Low Power Supply,TN86
  12. Water based pH regulation cyanobacteria electrical characteristics of microbial fuel cell research,TM911.4
  13. Proton exchange membrane fuel cell materials, design and development,TM911.4
  14. New fuel cell electrolyte membrane polyether sulfone Preparation and Properties,TM911.4
  15. Solid oxide fuel cell with a gas turbine Novel Hybrid System Simulation,TM911.4
  16. Resistant chromium poisoning , high-performance solid oxide fuel cell cathode materials research,TM911.4
  17. Stainless steel fuel cell bipolar plate and its experimental and simulation,TM911.4
  18. Application of Micro-Nano Fibers in Solid Oxide Fuel Cell,TM911.4
  19. Study on the Preparation Sulfur-Free Expanded Graphite/Phenol Formaldehyde Resin Composite Bipolar Plates,TM911.4
  20. Fabrication and Performance Research of Large Size Half Cell by Tape Casting,TM911.4
  21. Study on Synthesis and Electrochemical Characteristics of Au Anode Catalyst for Direct Borohydride Fuel Cell,TM911.4

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Chemical power sources,batteries, fuel cells > Fuel cell
© 2012 www.DissertationTopic.Net  Mobile