Dissertation > Excellent graduate degree dissertation topics show

Structure and Properties of Nano-Silicate Fiber and Micron Fiber/Rubber Composites

Author: XiaoChunJin
Tutor: TianMing
School: Beijing University of Chemical Technology
Course: Engineering of Polymer Processing
Keywords: fibrillar silicate chloroprene rubber Nitrile-Butadiene Rubber anisotropy nylon fiber reinforcing
CLC: TB383.1
Type: Master's thesis
Year: 2006
Downloads: 291
Quote: 0
Read: Download Dissertation

Abstract


In this paper,Fibrillar silicate (AT)/rubber nanocomposites were successfully prepared by directly mixing modified AT with rubber. It is found that AT could be separated into nano-fibrils with diameters less than 100nm by the shear forces during mixing. The stress-strain characteristics of these composites are similar to those for short micro-fiber/rubber composites (SFRC). Nevertheless, these FS/rubber composites have some outstanding advantages over the conventional SRFC, even though the reinforcing effect of FS is restricted due to its small shape aspect ratio. The composites showed evident anisotropy in mechanical properties in two different directions duo to the oriented arrangement of nanofibers. The reinforcing effect of PAT resulted from nano-scale dispersion structure and high shape aspect ratio.We also studied The mechanical properties of three kinds of

Related Dissertations

  1. Yunnan Province 's direct control of the county Reform,D630
  2. Optical Bistable Properties in an Nondilute Suspension of Coated Particles Witn Dielectric Anisotropy,O437
  3. Study of Visualization Techniques Based on Diffusion Tensor Imaging,TP391.41
  4. Simulate and Study the Dosimetric Parameters of 103Pd Brachytherapy Source,TL84
  5. Synthesis and Property Study on Polyurethane Reinforcing Agent Used for Coal Mine Safety Materials,TD7
  6. A preliminary study of ray tracing in anisotropic media and weakly anisotropic medium approximation method,P315
  7. Mechanic Analysis of Bridge Reinforcement with Mesh and Steel Fiber Reinforced Concrete and Construction Technology,U445.72
  8. The Study on Strain Distributions and Equilibrium Morphologies of Anisotropic Quantum Dots,O471.1
  9. Research about the Preparation and Properties of Curcumin Liposome,TQ461
  10. Effect of Cholesterol on Liposome Membrane Bilayer Structure、Liposome Properties and Function,TB383.2
  11. Evaluation of Material Mechanical Properties by Small Punch Test at Low Temperatures,TG115.5
  12. Study on the Evidence Effect Ofaccomplices’oral Confession,D925.2
  13. Research on Relif Programs of Relevant Evidence and Pretrial Custody in China from "Lee Intentional Homicide",D925.2
  14. Mechanical Properties of Rock Mass by Loading and Unloading Tests and Its Engineering Application,TU452
  15. WSN nodes sensing zone model experimental study,TP212.9
  16. Reinforcement measures distortional buckling steel beam research to prevent curling Z,TU392.1
  17. Shear Wave Splitting at XinJiang Region,P631.4
  18. Human mitochondrial transcription factor B1 and B2 functional studies,Q987
  19. FePt / CoFe magnetic composite membrane dynamics of laser pump-probe,O484.43
  20. MRAM with perpendicular magnetic anisotropy spin valve performance optimization,O484.43
  21. Effect of Microstructure and Texture on Tensile Mechanical Properties of AZ31 in Room Temperature,TG146.22

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile