Dissertation > Excellent graduate degree dissertation topics show

Study on Prop. Deterioration and Bearing Capacity of Corrosive RC Members

Author: LiZiChao
Tutor: JinGuoFang
School: Tongji University
Course: Structural Engineering
Keywords: steel bar corrosion corrosion cracking finite element analysis bearing capacity bond-slip durability estimation
CLC: TU375
Type: Master's thesis
Year: 2006
Downloads: 533
Quote: 7
Read: Download Dissertation

Abstract


Reinforcing bar corrosion is one of the most important factors which deteriorate durability of concrete structures and members. Steel is prone to corrode because of loss of alkalinity of the cover concrete due to carbonation. Ongoing steel corrosion in concrete leads to cracking of concrete cover and reduction of the bond strength between steel and concrete. And finally, the deterioration of bearing capacity of reinforced concrete members will occur.In accordance with the study process of "mechanical properties of corrosive steel bars—methods of detecting steel corrosion and estimation of corrosion rate— deterioration of mechanical properties of corrosive reinforced concrete members— durability estimation of corrosive concrete structures and members", systematical study of corrosive concrete structures, is summarized by the author as follows: (1) Deterioration of mechanical properties of corrosive steel bars is studied. (2)The nondestructive methods of detecting steel corrosion in concrete are discussed in their practical application, merits and demerits. And the systematical methods are given, which can be used to estimate reinforcement corrosion rate according to the appearance of concrete members. (3)Through analyzing factors leading to deterioration of reinforced concrete structure performance, the author conducts the analytical method on basic members with corrosive steel bars by non-linear finite element simulation, and meanwhile studies the degrading laws in mechanical properties of reinforced concrete beams under various corrosion rates by utilizing finite element software ANSYS. (4)Based on the non-linear finite element analysis results and existing test data, reasonable method is obtained in calculating flexural capacity of reinforced concrete beam with corrosive bars, together with main principles. (5)With the help of above-mentioned analysis results, primary study on durability estimation of corrosive reinforced concrete structure in service is carried on in this paper. And finally, the direction of further research is briefly discussed.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Study on the Environmental Cost on the Basis of Environmental Systems Reproduction Theory,F406.72
  8. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  9. Sham hose drum drive means and hydraulic system of the structure,TE973
  10. Experimental Studies on High Temperature Material、 Carbonization and Flexural Behavior of Flexural Member of RAC,TU528
  11. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  12. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  13. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  14. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  15. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  16. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  17. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  18. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  19. The Design of Telescopic Asphalt Spraying System,U415.524
  20. Development of Post-process System in Sheet Metal Simulation Based on SolidWorks,TP391.72
  21. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures
© 2012 www.DissertationTopic.Net  Mobile