Dissertation > Excellent graduate degree dissertation topics show

Based on CAN / LIN bus intelligent body network system design

Author: ZuoChuanWei
Tutor: DengYaDong
School: Wuhan University of Technology
Course: Vehicle Engineering
Keywords: CAN bus LIN bus Agreement Body Networks
CLC: U463.6
Type: Master's thesis
Year: 2006
Downloads: 440
Quote: 8
Read: Download Dissertation

Abstract


Car has a hundred years of history, the development of the world economy plays a huge role in promoting. The development process in the automotive , electronics technology can not be ignored propulsion, the development of the automotive industry constantly rejuvenates . Automotive electronics , intelligence, networking is an important symbol of modern automotive development one . Hyundai's increasingly high degree of electronic , which will promote rapid electronic devices in automotive electronics development and application . With the introduction of a large number of electronic control units , in order to improve the utilization of the signal , requiring a large number of data information can be shared in different electronic units , conventional wiring harness has been far can not meet this demand . The electronic control system network control fundamentally solve the problem. The main contents of this paper is to build one based on CAN / LIN bus intelligent body network system that covers the body of intelligent network design principles, system solutions , system functions and bus communication technology, and details of the body network system hardware design and software design ; ultimately body Control networks , intelligent , humane, improve the car 's comfort. Through research, the obtained results are as follows : 1. Implementation of the network control functions, as compared with the conventional body control , greatly reducing the wiring harness , the switch current to 15mA, to avoid the switching of large current and sintering phenomena . 2 Body network system has automatic protection function of electrical equipment and troubleshooting of self-recovery capabilities. 3 According to the characteristics of the network proposed fault diagnosis and fault display online diagnostic methods, and failure to achieve a faulty memory and history scroll search function. 4 Through the control strategy , developed a series of humane, intelligent control strategies , such as: people leave the car, automatically turn off lights, windows ; speeds greater than a set value, automatic locking , parking, automatic unlock ; unlock automatically after the collision window ; glazing splines functions.

Related Dissertations

  1. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  2. Study on the Locomotive Dynamic Supervision System,U284.48
  3. The Inductive Load Based Vehicle Body Network Control System,U463.6
  4. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  5. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  6. Research on High-Performance Computer I/O Bus,TP336
  7. Development of the Digitizer Based on PCI-E Bus,TP274.2
  8. Design of LXI 1553B Bus Communication Module,TP273
  9. Design of the Main Controller in Automotive Body Network Control System,TP273
  10. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  11. Reform of the civil service positions Consumption,D630
  12. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  13. Application of AWG in Decoy Protection Equipment,TN97
  14. The Study on Site Selection Methods about Bus Transfer Hub at Cross-Harbor Tunnel in Qingdao,U491.17
  15. The Study Intelligent Pressure Transmitter Based on Hart Protocol,TP212.6
  16. Research on Bus Collision and Rolling Simulation Technology,U467.14
  17. Research and Design of HART Communication Module Yston SUPMAX800D Sem,TP273.5
  18. Research of Clock Synchronization Over WIFI Networks,TN929.5
  19. Storage System Design in Solid State Disk Based PCI Express Interface,TP333
  20. Design of AHB Monitor Based on SHA and AES Algorithms,TP309.7
  21. Enterprise Service Bus Based Information Integration System for Die & Mold Enterprises,TP311.52

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Electrical equipment and accessories
© 2012 www.DissertationTopic.Net  Mobile