Dissertation > Excellent graduate degree dissertation topics show

Research and Design of the Ore-terminal Central Control System Based on Industrial Ethernet

Author: ZhangShuai
Tutor: LiZhiJun
School: Wuhan University of Technology
Course: Control Theory and Control Engineering
Keywords: Industrial Ethernet PLC communication OPC technology Network Control System
CLC: TP273.5
Type: Master's thesis
Year: 2006
Downloads: 142
Quote: 0
Read: Download Dissertation

Abstract


With automatic control, computer, communication, network technology development , information exchange areas already covered factories, enterprises and markets around the world , therefore , need to build from the industrial field devices containing layer to the control layer, the various levels of management integrated automation network platform to build an industrial control network technology-based enterprise information system . Industrial Ethernet with industrial control network characteristics necessary , with the continuous development of Ethernet technology and improvement of industrial Ethernet technology is represented by the field of industrial control COTS been widely used . In the late 1990s , major domestic and foreign industrial companies have in their control system using Ethernet , the introduction of Ethernet-based DCS, PLC, data acquisition, and Ethernet-based field instruments, display instruments and other products. In the future, Ethernet will become the first choice for the development of industrial control networks will also replace the current standards are too complex fieldbus and control automation systems into the enterprise level , network control system network in the end of the situation. In this paper, the control of Zhanjiang Port, the control system for the project background , from the network control system development process starting , detailed analysis of the Industrial Ethernet history, current status and trends in the field for Industrial Ethernet applications, a series of key technologies explored in depth research , focusing on analysis of Ethernet development still exist timeliness and uncertainties ; and elaborated in today's ethernet control system and ethernet network integration and information to build the integrated management and control system technical issues facing ; Finally, examples of Zhanjiang Port project starting , describes the building of industrial ethernet -based enterprise integrated automation system when the communication interface to solve a series of problems . I participate in the project, the hardware configuration , communication and PLC control procedures for the preparation , so this article also talked about belt conveyor system control program writing ideas and methods.

Related Dissertations

  1. The Inductive Load Based Vehicle Body Network Control System,U463.6
  2. Real-time Simulation of Low-Voltage Power Line Communication Channels Based on FPGA,TN913.6
  3. The Design of Servo Driver Industrial Ethernet Interface,TP273
  4. Industrial Ethernet fieldbus technology and control systems in a multi- node Research and Application,TP273
  5. Industrial Ethernet end delay Modeling and Analysis,TP273
  6. The Simulation Research on Dynamic Priority Scheduling for Wireless Networked Control System,TP273
  7. The co-design of scheduling and control of the network control system with resource constraints,TP13
  8. Network latency and packet loss in the network control system stability study,TP13
  9. The Temperature Control System of Vacuum Sintering Furnace Based on Ant Colony Algorithm and OPC Technology,TP273
  10. The R&D and Engineering Application of Independently Developed DCS for 600MW Power Unit,TP273
  11. Research and Implementation of Mine Track Transport Monitoring System Based on a Variety of Communications Technology,TP273
  12. Research on Application of Coal Dust Real-Time Monitoring System and Integration,TP274.4
  13. Optimal Control for Networked Control Systems with Data Packet Dropout,TP273
  14. Proportional-Integral Output Feedback Controller Design of Networked Control Systems,TP273
  15. Design and Stability Analysis of Networked Control Systems Based on T-S Fuzzy Control,TP273
  16. Research and Simulation of Industrial Ethernet EtherCAT for Communication System,TP273.5
  17. Research on OPC Technology and It’s Application,TP273.5
  18. The NetCon the inverted pendulum system - based network control,TP13
  19. Robust Stability of network control system,TP273
  20. Study of a New Signal Centralized and Locking System,TP273.5
  21. Stabilization of Networked Control Systems via Switching Controllers,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile