Dissertation > Excellent graduate degree dissertation topics show

Study on Front-End DC/DC Converter for Fuel Cell Power System

Author: ZuoShengLin
Tutor: XuDeHong
School: Zhejiang University
Course: Power Electronics and Power Drives
Keywords: fuel cell phase-shift full bridge ZCS DC/DC converter start-up protection.
CLC: TM911.4
Type: Master's thesis
Year: 2006
Downloads: 480
Quote: 10
Read: Download Dissertation

Abstract


Fuel cell has various advantages such as high efficiency of power generation, high power density, friendly interface, great stability and so on.Distributed power system is one of the most important applications of fuel cell. Compared to other kinds of power supply, power system based on FC has its superiority. Fuel cell will be widely used in the future as a new energy source, as the request for environment protection and energy conservation becomes more and more urgent and the influence of the rising cost of electricity transmission and the stress of power shortage becomes much more severe.Generating unstable direct current, fuel cell must be equipped with a Power Control Unit (PCU) to produce standard DC or AC power through regulation, control and management of the output. With the development of fuel cell products and technology, the researches on the power electronics supply base on fuel cell has showed the significance nowadays.The output voltage of a fuel cell single unit is usually less than 1V. As a result, the output of the whole fuel cell pack is not high enough for a distributed grid-connected power generation system,. Therefore, there must be an up-step converter between the fuel cell and grid-connected inverter.To increase the voltage between fuel cell output and inverter input, a 100V DC input and 380V double DC output DC/DC converter applied in a fuel cell grid-connected power generation system is discussed in this thesis.In the first chapter, the structure of FC power generation system and a front-end DC/DC converter which is suitable to FC grid-connected power generation system is briefly introduced. Then the topology of circuit is chosen and the object is confirmed.In the second chapter, the procedure of start-up, phase-shift is analyzed and the protection circuit is discussed. Then the parameters of the main circuits are calculated and the converter based on the 10 kW, 90v~130v output voltage PEMFC produced by Shenli company in Shanghai is designed.In the third chapter, the specific control circuits including phase-shift control, start-up control, protection circuit and IGBT driver circuit are proposed.In the fourth chapter, the experiment results and waveforms of specific points are given.

Related Dissertations

  1. Heat Transfer Performance of the Metallic Honeycomb and Regenerative Cooling Channel,V215.4
  2. The Research of Children’s Medical Environment Based on New Medical Mode,TU246.1
  3. Numerical Analysis of Flow Process in a Molten Carbonate Fuel Cell,TM911.4
  4. Fabrication of Membrane Electrode Assembly for PEMFC,TM911.4
  5. Research on HID Lamp Rectifying Effect,TM923.32
  6. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  7. Research on the Effects of Protection and Renovation of Apple Polyphenols on UVB-Induced HepG2 Cell Injury,S661.1
  8. Research on Algorithms of 2D Face Template Protection,TP391.41
  9. The Research of Vector CAD Electronic Drawing Protection System,TP391.72
  10. Research on Secure Fingerprint Authentication Based on Distance Projection Coding,TP391.4
  11. The Preparation and Properties of Reed Woodceramic,TQ174.1
  12. Pt -based catalysts of direct methanol fuel cells,TM911.4
  13. Morphology Control Synthesis and Anode Electrocatalysis Performance of Pt/Pd-based Catalysts for Fuel Cell,TM911.4
  14. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  15. The Study of Protection of Amino Acid and Peptide Bond Synthesis,O629.71
  16. Management of the University System of start-up period,G647
  17. World natural heritage resource protection and development of comparative study abroad,P96
  18. The Research on the Legal Issues of Green-Credit Policy,D922.68;F832.4
  19. Research rotodyne cutting damage yuan formation mechanism of high-voltage driver,TJ811
  20. Historic District Construction Protection and Update,TU984.114
  21. Value analysis of environmental taxes and System Construction,F812.42

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Chemical power sources,batteries, fuel cells > Fuel cell
© 2012 www.DissertationTopic.Net  Mobile