Dissertation > Excellent graduate degree dissertation topics show
Dynamic Modeling of PWM Plus Phase-Shift (PPS) Bidirectional DC-DC Converters
Author: SunLiPing
Tutor: XuDeHong;ChenMin
School: Zhejiang University
Course: Power Electronics and Power Drives
Keywords: PWM technology Phase shift control technology PWM plus phase shift (PPS) control technology Bi - directional DC-DC converter Dynamic Modeling
CLC: TM46
Type: Master's thesis
Year: 2006
Downloads: 436
Quote: 3
Read: Download Dissertation
Abstract
|
With the development of science and technology , bi-directional DC-DC converter is widely used the occasion of the DC power supply (UPS) systems , aerospace, power systems , electric vehicles , and mobile power generation system . PWM plus phase shift (PPS) control technology PWM technology with phase shift control technology combined with technology . Adjust the PWM duty cycle of the device , the equivalent of an electronic transformer in the circuit , so that the positive and negative voltage amplitude of the input square wave power and output square wave power match . Compared with the conventional phase shift control , the PWM plus phase shift (PPS) control mode of the current stress of the converter can be reduced , reducing the on-state losses , also can broaden the scope of the zero-voltage switching , so that the converter in a wide load variations can achieve soft switching. Typically, the converter needs plus negative feedback to form a closed loop system , in order to improve the accuracy and dynamic characteristics of the converter output , and therefore need to analyze the dynamic performance of the converter . Nowadays, the modeling method for bi-directional DC-DC converter is mainly state-space averaging method , and are modeling a system of adjustable parameters . PWM plus phase shift (PPS) control of the bi - directional DC-DC converter , there are two adjustable parameters - the duty ratio D , and the phase shift angle φ . Improvements on the basis of previous modeling study to create a small signal dynamic model having two adjustable parameters , the PWM plus the phase shift (PPS) the control of the bidirectional DC-DC converter , in order to power system analysis and an inverter controller design . To a PWM plus phase shift (PPS) to control the bi-directional DC-DC converter circuit , for example, dynamic modeling and analysis , simulation and experimental verification of the correctness of the dynamic model .
|
Related Dissertations
- Smart appliances Fault Diagnosis System Research and Application,TP273
- The Application of PWM Technology in AC-drive Electric Locomotive,TM461
- Design and Research of the direct-drive permanent magnet motor drive controllers based on the the PWM technology of screw pump,TM351
- Study on Random PWM Technology Based on Markov Chain on Frequency Control System,TM921.51
- The Research of Control Strategy and Its Application on Mine High-voltage Inverter,TN773
- The Design of Driving Power Source and the Study on Scanning Algorithm Applied to LED Panel,TN873
- The Research on Three Level SPWM VSC-STATCOM,TM761.1
- Design of Vehicle Electronics Drive Unit Based on CAN-Bus,TP273
- Study on DSP-based Soft-switch Welding Power Control System,TG434.1
- Research on Some Control Strategies of Cascaded Multilevel High Voltage Inverter,TM921.51
- Research for Unity Power Factor Rectifier Based on Voltage Space-vector Pulse-width Modulation,TM461
- Development of advanced static var generator (ASVG) principle and device,TM762
- Study on Oven Controlled Crystal Oscillator of High Stability and Small Size,TN752.2
- New high-power power of the electromagnet,TN86
- The Research on Emergency Power Supply System Based on DSP,TM910
- Based on the development of IGBT power inverter power,TN86
- Dodecahedral Imaging System for Flight Type,V241.8
- Design and Implementation of Digital-Controlled Bi-directional DC/DC Converter Based on Synchronous Rectify Technology,TM46
- A Novel Soft-Switching Bi-Directional DC/DC Converter,TM46
- Grey Dynamic Modeling Technique and Application,N941.5
CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net Mobile
|