Dissertation > Excellent graduate degree dissertation topics show

Research on Digital Control Scheme for Switching Power Amplifier

Author: WangWuBin
Tutor: LvZhengYu
School: Zhejiang University
Course: Power Electronics and Power Drives
Keywords: Switching Power Amplifier Digital control Interleaving control
CLC: TN722.75
Type: Master's thesis
Year: 2006
Downloads: 269
Quote: 2
Read: Download Dissertation

Abstract


In many areas , the power amplifier applications, such as audio , electrodynamic vibration test stand , etc. are . Switching power amplifier power amplifier , cf linear power amplifier has the advantages of low loss , suitable for high power (> 1kW) switching power amplifier system . Thesis in order to enhance the performance of high-power switching power amplifier system , suitable for power MOSFET devices multi- level switching power amplifier module focus on the development and design of simple digital control scheme . Mainly related to the content of the following aspects . Firstly, analysis of the five-level diode neutral point clamped inverter circuit ( \gives a brief introduction of the experimental use of digital signal processing chip . Secondly, the control scheme of the the FNI circuit current ; subsequently proposed for digital signal processing chip to achieve improved control scheme . The program is conducive to the introduction of a novel midpoint balanced strategy , and improved digital control scheme is verified by experiment . Again , the paper analyzes the Interleaving control switching power amplifier , and further expansion of the switching power amplifier module Interleaving simulation study , a relatively simple and low-cost control program . Finally, the thesis FNI circuit based on a 2.5kW , design , 20kHz prototype , the feasibility of multi- level switching power amplifier module the Interleaving digital control and verified by experiment .

Related Dissertations

  1. Research of a Flame Normalizing Machine by Digital Controlled in Railway,TG155.92
  2. Research on Characteristic of 2D Digital Relief Valve with Electrical Feedback,TH137.52
  3. Study on Gas-Magnetic Bearings Spindle and Digital Control for Precision NC Grinder,TG596
  4. Design and Digital Control on Two Degrees of Freedom AC Hybrid Magnetic Bearings,TM571
  5. Research on Digital Control System and Control Strategy of Permanent Magnet Biased Magnetic Bearing,TH133.3
  6. Rotor magnetic shunt hybrid excitation synchronous generator digital voltage regulator technology research,TM31
  7. Dual- phase permanent magnet synchronous motor direct torque control study,TM341
  8. A Digital Control DC-DC Based on PVT Ring Oscillator and MFMP Modulate,TM46
  9. Study of Structure and Control on Two Degrees of Freedom AC Hybrid Magnetic Bearings,TH133.3
  10. Research on Digital Controlled Single-Phase Inverter and Its Grid Connecting Technology,TM464
  11. Research on Single-Stage Full-Bridge Soft-Switching PFC Technology Based on Digital Control,TM46
  12. Research on the Servo Technique of High Precision Light Beam in the Air Laser Communication System,TN929.1
  13. Research and Implementation of Automatic Clutch in Hybrid Electronic Vehicle,U463.211
  14. Microwave frequency with the LLC resonant soft-switching power,TM925.54
  15. The Study of Digital Control for Switching Converter,TM46
  16. The Research and Implementation of CNC Bottom Controller Based on Optical Fiber Serial Communication,TP273.5
  17. Based on the Digital Control Constant-current Power Design of TMS320F28022,TN86
  18. Bi-directional DC/DC Converter for Super Capacitor Based Energy Storage System,TM46
  19. Research on ARM Based Digital Control of Pulse MIG Welding Inverter Supply,TG444
  20. Research on Bi-Directional DC/DC Power Storage Converter Based on Digital Control,TM46
  21. Research on Three Phase Grid-connected Inverter with Feedforward Repetitive Filter,TM464

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Basic electronic circuits > Amplification technology,the amplifier > Amplifier > Amplifiers: the role of sub- > Power amplifier
© 2012 www.DissertationTopic.Net  Mobile