Dissertation > Excellent graduate degree dissertation topics show

Three-dimensional Numerical Simulation of Vortex-pump

Author: LiJinHai
Tutor: LiLong
School: Hohai University
Course: Water Resources and Hydropower Engineering
Keywords: Vortex Pump Numerical Simulation Inlet Leaf shape Pressurized water chamber
CLC: TV136.2
Type: Master's thesis
Year: 2006
Downloads: 207
Quote: 5
Read: Download Dissertation

Abstract


The vortex pump as a non-clogging pump with excellent performance , increasingly used in urban drainage , chemical, mining and other fields . Vortex pump design theory is not mature, less excellent hydraulic model . Vortex pump , which now focuses on the experimental and theoretical analysis . Through the experiment, the structural parameters of the vortex pump the cyclone pump performance , and then to correct the structural parameters of the vortex pump . The structural parameters of the design method by the experimental correction cyclone pump , spend a lot of material and human resources , and the design cycle is longer . With the development of computer technology and computational fluid dynamics , turbomachinery three-dimensional flow field have developed rapidly and has become one of the hotspots of the present stage . Application of CFD technology pump flow field numerical calculation , observation, analysis of the structure of the internal flow field , to predict the performance of the pump , the pump structure to optimize the design , pump design theory and design methods . This article Reynolds equations and standard k - epsilon turbulence model , Pro / E 3D modeling software for physical modeling , unstructured meshing , finite volume method, a first-order upwind scheme governing equations discretized using multi- phase reference system method to solve the flow field of dynamic and static interference and SIMPLE algorithm to solve the discrete equations vortex pump flow field numerical calculation and analysis of the the vortex pump impeller and pressurized water chamber velocity field , pressure field spin stream of the internal characteristics of the pump . Through numerical simulation, analysis of the the vortex pump import different blade shape , and pressurized water chamber shape of the vortex pump performance , and the following conclusions : 1. The cyclone pump inlet size of the vortex pump performance influence , the import size impeller diameter is about 0.45 , moderate vortex pump inlet velocity vortex pump performance ; 2 . were calculated tilt blades ( R30F30 ) equipped with two-way , one - way tilt blade ( R30 ) and straight leaf swirl pump flow field , R30 leaves the best performance , high efficiency wide area as good as R30F30 blades ; 3. radial size increases with the quasi- spiral vortex pump pressurized water chamber , poor performance . Head of the calculated and experimental values ??compared to 5 to 8 percentage points higher in low flow conditions around 5.2% , 7.8% more high flow conditions .

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. The Classification of High Dimsnsion Flew Field Based on Manifold Learning,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  21. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > Hydraulic Engineering > The basic science of water resources project > Hydraulics > Hydraulic machinery hydraulics > Pump hydraulics
© 2012 www.DissertationTopic.Net  Mobile