Dissertation > Excellent graduate degree dissertation topics show

Theoretical Study and Experimental Verification of Brittle Fracture Criterion for Interfacial Edge of Bonded Materials

Author: CuiShuWen
Tutor: LiuYiHua
School: Hefei University of Technology
Course: Solid Mechanics
Keywords: bonded materials interfacial edge brittle fracture criterion theoretical prediction experimental verification
CLC: O346.11
Type: Master's thesis
Year: 2006
Downloads: 77
Quote: 1
Read: Download Dissertation


Based on the basic equations of the elastic plane problem, displacement fields and singular stress fields near the interfacial edge of bonded materials are obtained.Based on the brittle fracture criterion for V-notches, the strain energy density factor criterion,the distortional strain energy density factor criterion, the circumferential tensile stress criterion and the circumferential tensile strain criterion for interfacial edge of bonded materials are given. They can be perfectly applied in engineering, because they are described only by two elementary parameters of the material: the tensile strength σc and the plane strain crack toughness K10c.In order to verify these criterions, tensile experiments are carried out for several kinds of samples made out of plexiglas and aluminium, and the compare is done between theoretical prediction and the experiment results for the directions of crack orientation and the critical loads.The results show that the directions of crack orientation predicted by the above criterions coincide with the experiment results. However, except circumferential tensile stress criterion, the critical loads predicted by the other criterions do not coincide with the experiment results.

Related Dissertations

  1. The Seawater-Glycol Liquor Casted Heat Exchanger’s Study in Seawater SourceHeat Pump System,TK172
  2. Research on Characteristics of Gas-Solid Flow in Air Nozzle Area in the Furnace and U-Valve in CFB Boiler,TK229.66
  3. The Application of CFD to Evalution and Improvement in Diesel Intake Port,TK423
  4. Cost Efficiency of Warehouse Management-Reference to China Custom Laws and Regulations,F752.5
  5. V-notch brittle fracture study,O346
  6. Theoretic Study and Experimental Verification of Brittle Fracture Criterion for V-notches,O346.1
  7. Numerical Simulation of Brittle Crack and Growth for Interface Edge of Bonded Materials,O346.11
  8. Bridges water -line method based on the traffic impact of harm to predict the feasibility of experimental study,U446
  9. Study on Constitutive Model and Damage-induced Permeability Change for Low-porosity Rock Base on Micrmechanics,TU45
  10. Numerical Simulation of Acoustic Properties of Multi-component Gas Mixture,O422
  11. Numerical Simulation and Experimental Verification of Brittle Fracture for Mixed Ⅰ-Ⅱ Type of V-notch,O346.1
  12. Pressure high flow fan design freedom,TH43
  13. Numerical Simulation Study on Emergency Ventilation System in Subway Stations,U231.5
  14. Small displacement motorcycle engine VVT mechanism developed,U483
  15. Three studies cycloidal planetary gear reducer,TH132.4
  16. Three new cycloid cycloid drive series three-dimensional modeling and prototype development,TH132.4
  17. The EMC Study of Electrifed Railroad’s SP & SSP,U224
  18. Theoretical and Experimental Study on Room-temperature Phase Change Materials Using Hydrated Salts as Agents,TB34
  19. Microstructure Optimization and Experimental Study of the Forging Process Based on Preforming Design,TG316
  20. Numerical Simulation for Thermal-Stress Coupled Sintering Process of Stainless Steel Component,TF124.5

CLC: > Mathematical sciences and chemical > Mechanics > Solid Mechanics > Strength theory > Fracture theory > Brittle fracture
© 2012 www.DissertationTopic.Net  Mobile