Dissertation　

About 39 item dissertation in line with HOOPS query results,the following is 1 to 50(Search took 0.020 seconds)

  1. Research on Optimal Sensor Placement in Dynamic Test and Its Implementation,TianYe/Huazhong University of Science and Technology,0/7
  2. The P system based on genetic algorithm and application based on DNA,ZhaoShuGuo/Shandong Normal University,0/4
  3. Design and Implementation of2&3D Automatic Drawing System Based on HOOPS and ACIS,ZhangXi/Sun Yat-sen University,0/16
  4. Workspace of Serial Mechanism3D Modeling Research,ChenGuangWen/Zhejiang University of Technology,0/8
  5. Research on HOOPS-based Platform of3D Graphics for Digital Product Modeling,FanChao/Dalian University of Technology,2/69
  6. Research and Realization on Visualization of Hybrid Modeling Based on HOOPS,ChenZeTian/Huazhong University of Science and Technology,0/18
  7. Experimental Research on Seismic Behavior of Grouted and Dowelled Jointed of Precast Monolithic Reinforced Concrete Column,YingYiHui/Xi'an University of Architecture and Technology,0/145
  8. Pre-treatment System for Hull Block Coordinate Measurement Based on HOOPS/ACIS,ZhangChi/Dalian University of Technology,0/20
  9. Research and Implement of Hull Block Processing System after Measuring,YuanRongHua/Dalian University of Technology,0/32
  10. Design and Realization of Ship Entity Modeling Technology Based on ACIS/HOOPS,ZhangGuoHui/Harbin Engineering University,1/61
  11. Research About Key Technology of Deformation Modeling System Based on ACIS,MaDengFu/Guangdong University of Technology,0/71
  12. Research on Modeling and Simulation Technologies of Virtual Tools for the3D Assembly Planning,YuanKang/Huazhong University of Science and Technology,0/40
  13. Study of Inspection Technologies Based on Point Cloud for Complex Surfaces and Its System Development,ZhangXueChang/Shanghai Jiaotong University,10/977
  14. RP-Oriented 3D Packing System Based on ACIS and HOOPS,HuangMin/Hebei University of Technology,1/149
  15. Contrast Analysis and Experimental Study of Mechanical Behavior of Confined Concrete,WangYong/Xi'an University of Architecture and Technology,5/246
  16. Designing and Realization of 3D Visualization System on Real Time Safety Monitoring of Bridges,XieQuanNing/Chongqing University,0/200
  17. Research on Collaborative Design System Oriented to 3D Modeling Software,LiuZuo/Hebei University of Technology,3/127
  18. The independent column underpinning structural reinforcement technology research,HuangXiangZhong/Xi'an University of Architecture and Technology,2/191
  19. Study of Push-over Method’s Apllication to the Antl-Selsmic Design of Self-Combu-Sted Gangue Relnforced Concrete Frame,JieNing/Taiyuan University of Technology,0/98
  20. Research based on the visualization of the assembly process and therefore seized,WangSuoJin/Northwestern Polytechnical University,1/256
  21. Study on the Key Technologies of Optical Coordinate Measuring System and Software Design,ZhangGuoQuan/Tianjin University,4/268
  22. Design and Implementation of Model Rendering and Management Subsystems of CFD Software,MaBiYou/Chongqing University,0/95
  23. Design and Implement the 2D Sketch Module Based on ACIS,WangZuoQuan/Chongqing University,0/138
  24. Experimental Study on the Seismic Behavior of Reinforced Concrete Masonry Shear Walls with End Restraint,HuZhiYuan/Harbin Institute of Technology,13/142
  25. Optimal Arithmetic of Punch Toolpath with Its I/O Interface of the System,WangZan/Southeast University,2/127
  26. Study on the Theory and Software Development of Virtual Machining System for Gears,ZuoXiaoDong/Chongqing University,1/122
  27. Collaborative design in product data management research,CuiYuZhen/Shandong Normal University,2/186
  28. Study on Shear Property of RC Beams with FRP Mesh Hoops,XingJianLong/Hohai University,0/117
  29. Behavior of Concrete Columns Wrapped with GFRP Hoops,GeShuKui/Dalian University of Technology,3/127
  30. The Research and Implement of Processing Software of Blank Holding Groove in Mechanical Press Craft Based on ACIS,MengFanChong/Chongqing University,0/63
  31. Research on Key Technologies of Three-dimensional Assembly Process Planning System,JiangYuFeng/Huazhong University of Science and Technology,0/202
  32. 3D model-based hull section detection system design and implementation,XuLei/Dalian University of Technology,0/103
  33. Research on the Cooperative Browsing and Markup Techniques Based on the Lightweight Models,ZhuLei/Huazhong University of Science and Technology,3/128
  34. Study on the Key Technology of Dental CAD Based on HOOPS,SunQingFeng/Tianjin University,1/95
  35. Study of Technology of 3D Visual Modeling of Ore Body,FengZhiDong/Xi'an University of Architecture and Technology,0/118
  36. Study on the Seismic Performances of Steel Beam-Concrete Column Confined by Continuous Compound Spiral Hoops Frame Structures,FengWeiFang/Xi'an University of Architecture and Technology,1/33
  37. Research on a New Product Information Model and Its Software Implementation Technology,LiLi/Hunan University,1/16
  38. Cross-Platform Research and Application of Die CAD System,GeHuaiFeng/Shanghai Jiaotong University,0/58
  39. Collaborative Design System Based on ACIS/HOOPS for Modular Fixture,MiaoJiao/Hebei University of Technology,0/28

Total 1 Pages First Previous 1 Next Last

© 2012 www.DissertationTopic.Net  Mobile