About 21 item dissertation in line with Interfacial microstructure query results,the following is 1 to 50(Search took 0.02 seconds)

  1. Research on Process and Mechanism of Transiet Liquid Phase Bonding of Gh4169Alloy and Post-weld Heat Treatment,WangYiFeng/Harbin Institute of Technology,0/24
  2. Joining of Alumina Ceramics by Whiskers and Joining of Alumina Ceramics with TC4Titanium Alloy,LiChun/Harbin Institute of Technology,0/45
  3. Technical and Mechanism Study on Vacuum Brazing of ZrB2-SiC Ceramic Composites,WangZhengZheng/Harbin Institute of Technology,0/22
  4. Development and Performance of Monolayer Brazed Multicrystalline CBN Grinding Wheels,ZhangBin/Nanjing University of Aeronautics and Astronautics,0/41
  5. Investigation on Laser Fusion Welding-brazing Aluminium Alloy to Galvanized Steel with Filler Powder,ZhaoXuDong/Beijing University of Technology,0/316
  6. Research and Development of Monolayer Brazed CBN Wheels for High Efficiency Grinding Nickel-based Superalloy,DingWenFeng/Nanjing University of Aeronautics and Astronautics,9/694
  7. Fundamental Research on Laser Brazing of Diamond Grains,YangZhiBo/Nanjing University of Aeronautics and Astronautics,0/285
  8. Investigation on Laser Penetration Brazing of Dissimilar Alloys,DongPeng/Beijing University of Technology,0/550
  9. Fundametal Research on High-frequency Induction Brazing of Diamond Wheels,XuZhengYa/Nanjing University of Aeronautics and Astronautics,0/178
  10. The Mechanism Research on Laser Brazing of Diamond Grits,LiJia/Nanjing University of Aeronautics and Astronautics,0/174
  11. Technical Study on Brazing of Graphite to Copper,ZhuYan/Harbin Institute of Technology,1/433
  12. Study on the Interfacial Microstructure and Microchemistry of Short Mullite Fiber Reinforced Aluminium-based Composites,ZhangXianJu/Sichuan University,3/161
  13. Research of Brazed Diamond Grinding Wheels Using Laser Beam,ZhaoGuangLiang/Nanjing University of Aeronautics and Astronautics,0/115
  14. The Effect of Stand-off Height for Miniature Solder Joint on the Reliability,HeMingMin/Huazhong University of Science and Technology,0/79
  15. Simulation study of the nature of the magnetization in the magnetic thin film systems,WangMaoHua/Yangzhou University,0/70
  16. Studies on the Interfacial Microstructures and Mechanical Properties of Thin-Wall Cu/Al Tube,BanYan/Ocean University of China,0/83
  17. Brazing Bonding Process and Interface Behavior of C/C Composite and TIB_w-TC4 Alloy,HuangChao/Harbin Institute of Technology,1/128
  18. Technical and Mechanism Study on Brazing of Wear-Resistant Ceramic Lining,WangFengYing/Harbin Institute of Technology,0/28
  19. Investigation on Manufacture of High Temperature Filler Metal and Brazing Technology of TiAl-Based Alloy,WangMing/Harbin Institute of Technology,1/101
  20. The Study on the Microstucture and the Friction Behavior of 3D-Meshy SiC/20Cr Composite Material,QuXiangYu/Northeastern University,3/36
  21. The Preparation, Microstructure and Propertities of the New Type 3D-Meshy SiC/Cu-Fe Composite Material,WeiWenZuo/Northeastern University,0/64

Total 1 Pages First Previous 1 Next Last

© 2012 www.DissertationTopic.Net  Mobile