Dissertation 

About 43 item dissertation in line with NURBS interpolation query results,the following is 1 to 50(Search took 0.041 seconds)

  1. The Research of Motion Controller System Based on DSP,XuYuanZe/Southwest Jiaotong University,0/85
  2. Research on Multi-constrained Feedrate Control for5-axis Interpolation,KangKaiXuan/Dalian University of Technology,0/99
  3. Study and Application of Interpolation Algorithm Based on NURBS Curve,JiYanWei/Northeastern University,0/94
  4. Research of BlAde Polishing Machine Tool Control Software Architectonic,WangZuo/Changchun University of,0/46
  5. Real-time Adaptive NURBS Interpolation Algorithm Based on Limited Acceleration of Singular Axis,ZhouShiWei/Guangdong University of Technology,0/49
  6. Study on Optimization of NC Machining Tool-path and Interpolation Algorithm,WuJiChun/Huazhong University of Science and Technology,0/235
  7. Theory and Design of Multi-axis Motion Control System Applicable to Sculptured Surface Machining,QiaoZhiFeng/Tianjin University,0/415
  8. Study on Optimization CNC Grinding Tool Paths of ZrB2Dome,DuHongBin/Harbin University of Science and Technology,0/17
  9. Study on Inetrpolation Method of Non-rotational Symmetric Surface Turning,WangZhenXing/Jilin University,0/28
  10. The Research of CNC System of Flame Cutting Machine,LiWei/Shandong University of Technology,0/91
  11. Research on Laser Screw Thread Parameter Detection Technology,LvDongFang/Harbin Institute of Technology,6/217
  12. Research and Development of Key Technologies in a PC-Based Multi-Axis Open Architecture Software-CNC System,MaXiongBo/Harbin Institute of Technology,12/963
  13. Research on NURBS Interpolation and Linear Motor Robust Control Technology for High Speed CNC Machining,XuRongZhen/Shanghai Jiaotong University,9/1137
  14. Study on Open CNC System Architecture and Interpolation Algorithm of Hybrid Polishing Machine Tool,HanShuang/Jilin University,3/489
  15. Research on Adaptive NURBS Interpolation and Implementation,ShenHong/Zhejiang University,0/506
  16. Platform based on open architecture CNC machining of complex surfaces,SunWeiTang/Northeastern University,0/266
  17. Construction of An Open Architecture Cnc System and A Series of Study of Its Key Technologies,LiuYuan/Harbin Institute of Technology,5/585
  18. The Study of Movement Controller for Open CNC,LiuChunYan/Fuzhou University,4/364
  19. Study on Data Exchange of Open Architecture CNC System,SunJunJie/Jilin University,1/233
  20. A Study on Interpolation Technique and Emulations of NURBS,LiuXinShan/Jilin University,17/1156
  21. Study and Application of Arc Spline,LinJie/Fujian Normal University,2/159
  22. Development of Open-Type Motion Controller Based on PCI and USB Bus,DingLiang/Harbin University of Science and Technology,10/460
  23. The Research and Development of Motion Control Board Based on DSP,LiaoYongJin/Guangdong University of Technology,10/701
  24. Research and Implementation of the Key Technology of NC Based on Complex Curve Interpolation,ZhengRongJian/Yanshan University,16/463
  25. Research on Control System of Numerical Control Curve Saw,XuZhaoJun/Nanjing Forestry University,9/149
  26. A Design of Multi-axes Motion Controller Based on PCI Bus with TMS320F2812,HouXiaoQiang/Nanjing University of Aeronautics and Astronautics,3/573
  27. Research on Real Time Pre-Process System of 5-Axis CNC System,YaoZhe/Shanghai Jiaotong University,5/424
  28. Research on the Direct Interpolation of Free Form Curve and Surface,MaChaoYang/Shandong University,9/334
  29. Research on the Free Form Curve and Surface Interpolation Technology Based on the SETP Standard,XuYuanFan/Shandong University,1/154
  30. A Study and Simulation on NURBS Interpolation with Real-time Look-ahead Function,ShaoJinJun/Zhejiang University of Technology,7/401
  31. Reserch on Adaptive Federate Interpolation Method and Look-Ahead Motion Planning Based on NURBS Curve,ZhangHaiTao/Xi'an University of Architecture and Technology,2/297
  32. The Research on Automatic Programming System of Diamond Turning of Optical Aspherical Surface,WangLei/Jilin University,1/116
  33. Single photo based on neural network 3D Face Modeling,GuoYang/Beijing University of Posts and Telecommunications,1/64
  34. Research on Motion Control System of Free-form Curve Machining,YeXiuZuo/Harbin Institute of Technology,0/80
  35. The Research on Some NC Key Technologies Based on the Combined Surface of Expander Tool,PengChuan/Lanzhou University of Technology,0/11
  36. Development of Interpolation Instruction of Parametric Spline in Open Architecture Cnc,GaoXiong/Harbin Institute of Technology,0/76
  37. For cutting , polishing and efficient NURBS curve interpolation algorithm,ZhaoHuiLiang/Xiangtan University,0/115
  38. Reseach of the Real-time Looking-forward Method of NURBS Interpolation,LiJianWei/Graduate School,Chinese Academy of Sciences,1/264
  39. Complex -shaped surface axis CNC machining systems research,QiaoZhiFeng/Tianjin University,4/206
  40. Research of NURBS Curve Interpolation and Development of Open-architecture CNC System,HouJinZhi/Northeastern University,1/133
  41. Research on Interpolation Algorithm for Complex Curve Based on Forward Feed Control,ZhouHang/Northeastern University,1/72
  42. Research on Three-DOF Gelatinizing Robot and Its Control System,XiaoYongQiang/Harbin University of Science and Technology,0/111
  43. Study and Implementation of Interpolation Algorithm Based on NURBS Curve,WangDong/Northeastern University,1/86

Total 1 Pages First Previous 1 Next Last

© 2012 www.DissertationTopic.Net  Mobile