Dissertation　

About 59 item dissertation in line with Solidification microstructure query results,the following is 1 to 50(Search took 0.039 seconds)

  1. Solidification Microstructure and Phases Evolution in Mg-6Zn-1Y Alloy Solidified under High Pressure,JiaoShiHui/Northeastern University,0/4
  2. Study on Microstructure Characteristics of Ductile Iron Alloy via Lost Foam Casting by Vibration Solidification,ZongXiaoMing/Huazhong University of Science and Technology,0/15
  3. Thermal Simulation for the Solidification Structure of Low Chromium Duplex Stainless Steel in Continuous Casting Process,CaoXin/Shanghai University,0/2
  4. Study on Solidification Microstructure Control of High Chromium White Cast Iron,YuYang/Xi'an University of Architecture and Technology,0/24
  5. Study on the Key Basic Technical Problems of Microstructure and Property of Chromium Wear-resistant Alloy,LiXiuLan/Xi'an University of Architecture and Technology,0/28
  6. Microstructure Evolution and Growth Mechanism of Faceted Peritectic Phase during Directional Solidification of Al-Ni Peritectic Alloys,LiuDongMei/Harbin Institute of Technology,0/112
  7. Growth Behaviour of Primary-crystalline Phases and Mechanical Properties of Directionally Solidified Al-Mn-(Be) Alloys,KangHuiJun/Harbin Institute of Technology,0/85
  8. Real Time Imaging on Microscopic Behavior during Alloys Solidification under Electric Field,ZhuJing/Dalian University of Technology,0/45
  9. Numerical Simulation and Experimental Research of Magnetic Field Distribution in Final Electromagnetic Stirrer,GuoJianShe/Dalian University of Technology,0/33
  10. Research on Formation of Anomalous Eutectic Microstructure in AuSn20Alloy Prepared by Melt Mixing,CaiLiang/Yunnan University,0/7
  11. Microstructure Thermal Stability and Mechanical Properties of Al-Mg Binary Alloys Solidified under High Pressure,JieJinChuan/Harbin Institute of Technology,0/215
  12. Molecule Dynamics Simulations on Rapid Solidification and Crystal Growth of Ti and Ti-Al Alloy,FuZuo/Huazhong University of Science and Technology,0/49
  13. Aerodynamic Levitation Solidification of Al-Ca Alloy and in Situ Research on Porosity,ZhangLong/Shanghai Jiaotong University,0/30
  14. Solidification Behaviors and Microstructure of Undercooled Metals,ZhaoZhiWei/Xi'an University of Technology,0/150
  15. Through the Pb-Sn Alloy Solidification Process Evolution Modified Nano SiC Powder Mechanism,PeiZhiYong/Dalian Jiaotong University,0/23
  16. Foam Ceramics/Al-xSi Investigation of Automotive Braking Material,LvXinYu/Nanchang University,0/9
  17. Microstructure Evolution of Binary TiAl Peritectic Alloys during Directional Solidification,LiuChang/Harbin Institute of Technology,7/510
  18. Numerical Simulation on Solidification Microstructures Using Cellular Automaton Method,ChenJin/Southeast University,3/686
  19. Study on Solidification Microstructure Characteristics of Fe-Based Alloys Subjected to Pulsed Electric Current Treatment,ZhangMing/Yanshan University,0/350
  20. Study on Mold Filling and Solidification of Magnesium Alloy in Lost Foam Casting Process under Controllable Pressure,WuHeBao/Huazhong University of Science and Technology,10/454
  21. A Study on Numerical Simulation of Microstructure and Shrinkage Cavity Formation during Solidification Process of Casting,LiWenZhen/Tsinghua University,25/1517
  22. Simulation of Fluid Dynamics Behavior and Solidified Structure in Welding Pool,ZhaoYuZhen/Beijing University of Technology,18/1430
  23. Microstructure and Phase Selection in the Unidirectional Solidification of Zn-Cu Peritectic Alloy,WangMeng/Northwestern Polytechnical University,16/493
  24. Research on Solidification Behavior and Application of Magnesium Alloys by Sub-Rapid Solidification,ZuoHaiTao/Dalian University of Technology,2/468
  25. Phase-field Method Research on Microstructure of Solidification under Forced Flow,YuanXunFeng/Lanzhou University of Technology,1/168
  26. Study on Microstructure Evolution of Ternary TiAl-5Nb Alloy During Directional Solidification,YangHuiMin/Harbin Institute of Technology,0/180
  27. Research on Microstructure Evolution and Formation of Fe-C Based Powders by Gas Atomization,YangMin/Shanghai University,0/78
  28. Microstructure and Properties of ZA27 Alloy with Micro-alloying and High Intensity Ultrasonic,WangYanQin/Jiangsu University,0/65
  29. Microstructure and Properties of Aluminum Matrix Composites by Complex of Micro-alloying and In-situ Particulate,SunHongQiang/Jiangsu University,0/126
  30. Research on Microstructure Optimization and Mechanical Properties of Aluminum Matrix Composites Reinforced by In-situ Particulates,XuKe/Jiangsu University,0/184
  31. Hot continuous unidirectional solidification process microstructure simulation,YiGuanYu/Lanzhou University of Technology,0/209
  32. Research on the Directionally Solidified Microstructure of Cu-Sn Peritectic Alloys,LvHaiYan/Northwestern Polytechnical University,7/227
  33. Microstructure Evolution of Zn-(2.00～4.00)%Cu Peritectic Alloy,WuJianChun/Southeast University,0/63
  34. Study on the Preparation, Microstructure and Property of Rapidly Solidified Mg-Zn-Y Alloy,LiuJingYuan/Nanjing University of Technology,4/390
  35. Studies on the Solidification Microstructure and Tribological Properties of Highly Undercooled Ni-Pb-Cu Monotectic Alloys,WangMin/Nanjing University of Technology,0/81
  36. Effects of Solidifying Condition on Microstructure and Nucleation Dynamics of Mg-Zn-Y Alloys,ZhangMei/Zhengzhou University,1/182
  37. Study on the Progress of Hypoeutectic Cu-Cr In-situ Composites Wire Prepared by Horizontal Continuous Casting and Its Performance,LeiPengFei/Northwestern Polytechnical University,0/84
  38. Investigation on Al/SiCp Electronic Packaging Materials Fabricated by Gas Pressure Infiltrating Processes,ZuoQing/Northwestern Polytechnical University,2/264
  39. The Study of Microstructure Simulation of Aluminum Alloy under Solidification Process,ZhangZhouQing/University of North,7/385
  40. Structural Evolution and Solidification Behavior of Highly Undercooled Nickel-Lead Monotectic Alloy Melts,ZhengHongXing/Xi'an University of Technology,7/183
  41. Casting CuCr Alloy,YangHongWang/Xi'an University of Technology,7/273
  42. Preparation and Mechanical Properties of 6005A Matrix Composites Synthesized under Magnetic Field,ZhuXiaoHui/Jiangsu University,0/76
  43. Process Optimization and Performance of A356 Alloy by Enhancing and Compounding Treatments,LiuLei/Jiangsu University,0/177
  44. Effect of Ru on the Microstructures and Stress Rupture Properties of a Single Crystal Superalloy,ZuoLiang/Shenyang University of Technology,1/133
  45. The Effect of Properties of Zn-Al Alloy with Adding Multiple Alloys,YuSongLin/Jiangsu University,3/120
  46. Effect of Growth Rates and Alloying Elements on the Solidification Process of Al-Fe Alloy,XieYao/Shenyang University of Technology,0/72
  47. Fabrication and Microstructure of In-situ Particulates Reinforced 7055 Matrix Composites Synthesized by Sonochemistry,ChenDengBin/Jiangsu University,0/112
  48. Microstructure and Properties of A356 Matrix Composites Synthesized under the Pulsed Magnetic Field,WangChangQin/Jiangsu University,0/121
  49. Microstructure and Properties of TiB2（P）/AZ91D Composites Fabricated under High-energy Ultrasonic Field,XueXiCai/Jiangsu University,1/131
  50. Microstructure and Phase Composition of Directionally Solidified Ternary Al-Cu-Ni Alloy,YuanYuZuo/Yanshan University,0/45

Total 2 Pages First Previous 1 2 Next Last

© 2012 www.DissertationTopic.Net  Mobile