Dissertation 

About 186 item dissertation in line with Surface quality query results,the following is 1 to 50(Search took 0.042 seconds)

  1. Research on Surface Defect Inspection of Strip,YuanXinYan/Hunan University,0/12
  2. Design and Research of Pneumatic Lotus Seed Sheller,TangYun/Xiangtan University,0/46
  3. Research on Dual-robotic Synergic Drilling and Riveting System,ShiZuo/Zhejiang University,0/34
  4. The Research of Inverse Control Model and Parameters of VAI Mold Oscillation,LiuYunFeng/Yanshan University,0/39
  5. Inductively Coupled Plasma Jet Processing for Silicon-based Materials,JinJiang/Harbin Institute of Technology,0/43
  6. Study on Mechanism and Application Fundamentals of Laser Removal of Metal Oxides,ZuoYanQun/Jiangsu University,0/6
  7. Research on Surface Oualitv in Micro-grinding of Hard Brittle Materials,WuZhiZheng/Northeastern University,0/21
  8. The Experimental Research on Grinding of Ultra-fine Grain Cemented Carbide,ZhouXiaoYu/Hunan University,0/44
  9. The Nonlinear Vibration Characteristics Research in Milling Chatter Produce Process,XiaoFei/Harbin University of Science and Technology,0/3
  10. Study of Ultrasonic Cutting Hard and Brittle Materials by Using Sandwich Bending Vibration Transducer,ZhouChen/Jimei University,0/35
  11. Elliptical Vibration Ultraprecision Micro-cutting System Design and Research on Mechanism,ZhangChenFeng/Harbin Institute of Technology,0/50
  12. Geometric Prediction of Serrated Chip in High-speed Machining of Aluminum Alloys7A04,SunZhaoLai/Yanshan University,0/48
  13. Research on Surface Quality in Diamond Cutting of Titaum Alloys,ZhaoYunZuo/Harbin Institute of Technology,0/145
  14. Tanggang Five Even Mill Emulsion Lubrication System Transformation and Function Optimization,LvZhiYong/Yanshan University,0/32
  15. Surface Topography Characteristic of1Cr18Ni9Ti and45#Steel after Electrochemical Finishing,ChenDan/Dalian University of Technology,0/3
  16. Research on Technology in the Chemical-mechanical Polishing for Aluminum Alloy,MeiJinBo/Hunan University,0/31
  17. Copper Alloy Electrolyte-Plasma Polishing Method,HuangZhiPeng/Harbin Institute of Technology,0/17
  18. Experimental Study on Effects of Rapid Heat Cycle Molding Process Parameters on Surface Quality of Plastic Products,ChenChuan/Zhejiang University of Technology,0/7
  19. Simulation of Temperature Fields and Experimental Research on Pulse-Laser Assisted Turning of Al2O3Ceramics,LiaoXianYu/Hunan University,0/22
  20. Study on Key Technologies of Non-destructive Visual Inspection for Quality Defects on Workpiece Surface,WeiYan/Xiangtan University,0/9
  21. The Detecting System Based on Numerical Simulation for Surface Distortion of Automobile Panel,ShiZhiHui/Huazhong University of Science and Technology,0/35
  22. Key Techniques for EDM of Shrouded Blisk’s Surface Quality,SunXiaoZuo/Shanghai Jiaotong University,0/76
  23. The Design of Embedded Control System Used in Laser Truing and Dressing Diamond Grinding Wheels,JiaTianYang/Hunan University,0/29
  24. Study on the Performance and Preparation Process of Fluid Magnetic Abrasive Finishing Tecnology,LiWeiDong/Taiyuan University of Technology,0/65
  25. Experimental Study on Electrochemical Grinding of K424Cast Nickel-base Superalloy,ShenZuoZuo/Nanjing University of Aeronautics and Astronautics,0/86
  26. Research on Surface Integrity Influencing Factors of High Speed Point Grinding and Surface Quality Control,LiuChangFu/Northeastern University,0/43
  27. Study on Grinding Trajectory by UNIPOL-802Surface Lapping Machine,FanJiaPeng/Northeastern University,0/71
  28. Research on the Surface Quality of the Component in High Speed Point Grinding,HanTingChao/Northeastern University,0/68
  29. Process Test Research on Stainless Steel in Ultra-High Speed Grinding,FengCanBo/Hunan University,0/87
  30. FEM Analysis and Experimental Research on Ball End Milling Harden Steels Assembled with Different Hardness Steel,TangYongJiang/Zhejiang University of Technology,0/43
  31. Research on Surface Quality and Tool Wear in High-Speed Milling of SiCp/Al Composites,WangYangJun/Harbin Institute of Technology,1/431
  32. Research on Milling Force and Surface Quality of High Speed Milling of45Steel,KangXiaoJian/Hunan University of Science and Technology,0/133
  33. Research on Surface Quality of Flank Milling for Integral Impeller,YaoDi/Beijing Jiaotong University,1/131
  34. Research on Tool Path Planning and Process Parameter Optimization Technology of High Speed Milling for Die,ChenYing/Jilin University,0/354
  35. Research of Mechanism on Drilling SiCp/Al Composites High Efficiently and Precisively,BaiDaShan/Shenyang University of Technology,0/53
  36. Research on Processing Technique Method of Turning-grinding,ZengZuo/Northeastern University,0/44
  37. Experimentation and Analysis of Machined Surface Quality for Cutting304Austenitic Stainless Steel,WangZhiGuang/Huazhong University of Science and Technology,0/68
  38. Research on Surface Quality Detection and Analysis for A3Steel in High-speed Cutting,WuKai/China Jiliang University,0/62
  39. Investigation on Cutting Performance of a High-Strength Wear-Resisting Aluminum Bronze Alloy,ZhangLiang/South China University of Technology,0/104
  40. Residual Stress Control Research on Machined Surface for Pre-stress Cutting,ZuoMengYang/South China University of Technology,2/369
  41. Research on Surface Quality Control in Incremental Sheet Forming,SongXiuCheng/Shanghai Jiaotong University,0/60
  42. Research on Lubrication Technology of SUH409L Ferrite Stainless Strip Steel in Cold Rolling,WuLiPeng/Northeastern University,0/67
  43. Experimental Research on High Volume Fraction SiCp/Al Composites with Ultrasonic Longitudinal-torsional Vibration High-speed Milling,YueGuangXi/Henan Polytechnic University,0/19
  44. Development on New-type Liquid Release Agents for Polyurethane Foam,XiaoYao/South China University of Technology,0/25
  45. Study on Response and Mechanical Properties of Material after Micro-scale Laser Shot Peening,WangMin/Jiangsu University,0/39
  46. Experimental Investigation on Laser-Low Pressure Medium Jet Compound Machining,ZhengWei/Construction Industry Institute,0/54
  47. Study on Improvement of Machining Quality of Surface Machined by Laser,ShenXueFei/Beijing University of Technology,0/275
  48. Research on Finishing and Modification of Gear Using Pulse Electrochemical and Electrochemical Mechanical Methods,PangGuiBing/Dalian University of Technology,12/210
  49. Study on the Fluid Magnetic Abrasive Finishing Technology,SunHuanWu/Taiyuan University of Technology,6/220
  50. Theoretical and Experimental Studies on Ultrasonic Aided High Efficiency Lapping With Solid Abrasive of Engineering Ceramics,JiaoFeng/Shanghai Jiaotong University,4/416

Total 4 Pages First Previous 1 2 3 4 Next Last

© 2012 www.DissertationTopic.Net  Mobile