Dissertation 

About 51 item dissertation in line with Thickness control query results,the following is 1 to 50(Search took 0.028 seconds)

  1. The Research of Multi-layer Hot Press Rack-Optimized and Related Technologies Based on Green Manufacturing,DiYuLi/Northeast Forestry University,0/53
  2. Neuro-Fuzzy Control of Thickness for5-Stand Mill,WuQingHua/Tianjin University of Science and Technology,0/3
  3. Human-simulated Intelligent Control Based on Parameters Setting by Fuzzy Neural Network of Hot-rolling Strip Thickness,ZhangGuanYu/Taiyuan University of Technology,0/3
  4. Gauge Control System of Hot-rolling Based on MCU,QinJunHong/Jinan University,0/42
  5. Robust Predictive Control for Time-delay System and Its Application Research in Thickness Control System of Rolling Mill,ZhaoJunCheng/Yanshan University,0/53
  6. Research on Cold Roll Control Technology of Single Stand Direct-Pulling,ChenJia/Northeastern University,0/47
  7. The Research of Thickness Control Optimization in Baosteel1580mm HSM,WangJinTao/Northeastern University,0/81
  8. Research on the Thickness Control Technology in1580HSM of Baosteel,ChenZhiRong/Northeastern University,0/54
  9. Study and Application of Finishing Gauge Setting System for Hot Strip Mill,PengZhongJia/Northeastern University,0/67
  10. During the Design of the Computer Control System of the Strip Thickness,WanChen/Inner Mongolia University of Science and Technology,0/76
  11. Theoretical and experimental study of four roller rolling mill unilateral pressure AGC control system,ShiJianHui/Taiyuan University of Science and Technology,0/77
  12. Iterative Learning Control Systems Design and Its Applications,LiuShan/Zhejiang University,15/1370
  13. Development and Application of High Accuracy Gauge Control for Plate Mill,SunTao/Northeastern University,2/670
  14. Design of Craftwork Glass Thickness Controller Based on Neural Network,MaYu/Wuhan University of Technology,1/51
  15. The Thickness-Control of Gypsum-Fibre Board Base on Intelligent Control,ZhouShuo/Shenyang University of Technology,1/47
  16. In Plastic Spatial Blow Molding Machine Electro-hydraulic Proportion Position Control System Research,XingJingYi/Inner Mongolia University of Science and Technology,2/152
  17. Study on the Plate Rolling Mill of the Ni/MH Battery with High Capacity,ChenWeiFan/Shenyang University of Technology,0/80
  18. Parameters Measurement and Eccentricity Compensation of the Cold-Rolling Mill of 1270mm,ChenZhiWang/Yanshan University,8/196
  19. Study on Five Stands Cold Rolling Continuous Thickness Control and Its Application,LiuFengJia/Xi'an University of Architecture and Technology,1/490
  20. The Development of the Measuring and Controlling System Based on ARM and Uclinux,LiangWeiDong/Xi'an University of Technology,1/214
  21. Research and Application on Hydraulic AGC of Four Roller Mills in Medium Plate Factory,WangShanTian/Shandong University,5/461
  22. Parison Wall Thickness Profile and Its Control in Blow Molding Machine,LiJianJun/Shanghai Jiaotong University,0/105
  23. Research and Design of Fuzzy Controller for Blank Moulding of Plastic Blower,WangZiKang/Chongqing University,0/159
  24. Research of Membrane Thickness Control System on CPLD and Virtual Instrument Technology,MiaoQiuShi/Changchun University of Science and Technology,0/108
  25. PCC Based Optical Glass Cold End Confectioning System,ChenTao/Wuhan University of Technology,0/36
  26. The Study on Both Lorry End-sides and Side-walls’ Paint Thickness Quality Control of JJ Plant,WenJianLi/Tianjin University,0/40
  27. Study and Application of Heavy H-Beam Mill Automatic Control System,LiEnWei/Shandong University of Science and Technology,1/251
  28. Research on Integrated Strategy of Strip Thickness Control,WangZhiGang/Northeastern University,3/403
  29. Study of Massflow Automatic Gauge Control on the Application of 1450mm Six High Cold Reversing Mill Systems,MaXiaoHe/Hebei University of Technology,2/190
  30. Study on Identification and Self-Tuning Control of the 1370 Cold Strip Rolling Mill Gauge Control System,WangNaWei/Yanshan University,1/198
  31. The Experimental Research of Eccentricity Compensation in 1370 Cold Strip Mill Gauge Control System,ZhangHongFeng/Yanshan University,2/129
  32. Study on the Technology of Automatic Gauge Control System of Hot Strip Mill,GongWen/Chongqing University,2/474
  33. Hydraulic System Design and Dynamic Simulation Research of Six Roll Cold Mill,WangJinTao/Chongqing University,2/235
  34. Hot strip thickness control theory and algorithm research and implementation,WenZuo/Wuhan University of Science and Technology,4/347
  35. Research on Compensation Control of Rolling Mill Export Thickness Periodical Fluctuations,ZhaoZuo/Xi'an University of Technology,1/66
  36. Design and Research on High-Precision Film Thickness Controller Instrument,ZhongLiang/Changchun University of Science and Technology,0/50
  37. A Study on Simulation Platform of Gauge Control System in 1420 Tandem Mill,LiuXiuJun/Yanshan University,0/108
  38. Modeling of Tension Control System of 1450 Tandem Cold Rolling Mill and Predictive Functional Control Research,ShengJianCun/Yanshan University,1/202
  39. Researching of Automatic Gauge Control and Rolling of Longitudinal Profile,GaoJuan/Yanshan University,2/94
  40. Study on Roller Eccentricity Compensation in Hydraulic Gauge Control System of 300 Four-Roller Cold Mill,GaoQiMing/Yanshan University,0/83
  41. Research on Modeling and Adaptive Control for AGC System of Five Stand Cold Continuous Rolling,LiuYuMing/Yanshan University,0/126
  42. Variable thickness plate rolling technology and its thickness control model,DingLei/Taiyuan University of Science and Technology,0/96
  43. Study on 5-stand Tandem Cold Rolling Mill Thickness Control System,LiYongFeng/Zhejiang University of Technology,0/65
  44. Simulation and Optimization Studies of Dynamic Characteristic of Hydraulic AGC System Based on AMESim,YanMingXing/Chongqing University,2/365
  45. Single stand four aluminum cold rolling mill rolls Research and Application of Computer Control System,ZhaoKuang/Northeastern University,0/82
  46. Research on Thickness Control System of Tire Calender,LiuShiGuang/Northeastern University,0/31
  47. Predicting Thickness of Plate Mill and Study on Fuzzy Control System,GuoBin/Zhengzhou University,1/91
  48. Statically and Dynamical Characteristics Analysis on Two Stands Reversible Cold Rolling Mill,HouZeYue/Northeastern University,0/34
  49. Application Research of 20-High Mill Thickness Control System,CaoShiHai/Northeastern University,0/59
  50. Gauge Control Based on A Steel Cold Rolling,ChenYanRu/Inner Mongolia University of Science and Technology,0/45

Total 2 Pages First Previous 1 2 Next Last

© 2012 www.DissertationTopic.Net  Mobile