Dissertation　

About 40 item dissertation in line with filling process query results,the following is 1 to 50(Search took 0.079 seconds)

  1. Study on Technology and Device of Quantitative Powder Filling of Micro Heat-pipe with Sintered Wick,WangWei/South China University of Technology,0/15
  2. Study on Powder Delivery and Process in Laser Welding of High Strength Galvanized Steel with Powder Filling,XuLei/Hunan University,0/26
  3. Steam Valve Casting Process Optimization,SongDaoChun/Xi'an University of Petroleum,0/1
  4. Applications of TRIZ in the Innovative Design of Injection Mold,HuXiuZuo/Inner Mongolia University of Science and Technology,0/13
  5. Numerical Simulations of Vertical Centrifugal Casting’s Filling Process,ZhangJun/Huazhong University of Science and Technology,0/82
  6. Numerical Computer Simulation Technology of Squeeze Casting Filling Process,HanMingXing/Wuhan University of Technology,0/71
  7. Cast Filling Simulation Technology Based on Fractional Step Method and Cut-cell Technology Basic Research,YaoBinYe/University of North,0/13
  8. Study on Overlying Strata Movement Behavior for Longwall Filling Mining of Superhigh-water Material and Its Control,SunChunDong/China University of Mining and Technology,2/470
  9. Numerical Simulation of Flow and Heat Transfer Using Smoothed Particle Hydrodynamics,HeYi/South China University of Technology,0/142
  10. Finite Element Modelling of Non-isothermal Non-Newtonian Viscoelastic Flow in Mould Filling Process,HanXianHong/Dalian University of Technology,4/558
  11. Filling Process and Evolutionary Model of Sedimentary Sequence in Middle-upper Yangtze Cratonic Basin,HuangFuXi/Chengdu University of Technology,0/177
  12. The Research on Parts Structure and Cast Process Design Based on Computer-aided Design,YangLei/Lanzhou University of Technology,2/170
  13. The Numerical Simulation on Water-assisted Co-injection Molding Process,ZuoLi/Nanchang University,4/115
  14. Post Processing of Results of Computer Simulation of Mold Filling Base on OpenGL,WanZhiGuo/Nanchang University,2/69
  15. Research of the Algorithm of the Filling Process of Liquid Metal,ZhangShuJuan/University of North,2/129
  16. Numerical Simulation of Inclusion Movement during Liquid Metal Filling and Solidifying Process,YuMei/Shenyang University of Technology,3/161
  17. Mold Filling Process Research for Three-Dimensional Numerical Simulation of Casting,JuYingCui/Hebei University of Technology,2/314
  18. Low numerical simulation of the casting process,BaiYueLong/North China Institute of Technology,9/299
  19. Study of Key Technology in Die Casting Processing of Drying Apparatus Shell,LaiYaMin/Hefei University of Technology,0/75
  20. The Analysis and Research of Casting Process of Valve Body Based on CAE,DiaoSongTao/Lanzhou University of Technology,1/208
  21. Numerical Simulation of Mold Filling of Castings Based on the BFC System,ZhaoJianXin/Southeast University,4/83
  22. Study on Numerical Simulation of Mold Filling of a Casting Based on ANSYS Sofrware,TaoPan/Southeast University,6/567
  23. Semi-solid magnesium alloy die casting filling rheological law and numerical simulation,WengWenPing/Huazhong University of Science and Technology,3/325
  24. Technical Research of Centrifugal Casting of Silicon Rubber Model and Design Simulation of Vulcanizing Equipment,WangBo/Wuhan University,0/79
  25. Three-Dimensional Numerical Simulation of Mold Filling Process of Casting,WangXuBo/Shandong University,8/278
  26. Electromagnetic pump filling process simulation technology research,WangChunHuan/University of North,2/88
  27. Research on Knowledge-Based-Engineering Pouring-Exhausting-Flooding System Design of Die,BianDongZuo/Southeast University,2/140
  28. Parallel Software Development on Mold-filling Simulation of Casting Processess,YanLi/Chongqing University,0/93
  29. Finite Element Numerical Simulation of Disk Casting under Low-Pressure Die Casting,SongWenJuan/Xi'an University of Technology,2/172
  30. Three-Dimensional Numerical Simulation of Filling Process of Casting,WangHui/Shandong University,0/121
  31. Numerical Simulation and Experimental Analysis of the Filling Process of Micro Parts in Injection Molding,TaoQiao/Dalian University of Technology,6/224
  32. Research on Air-entrapped Quantitative Prediction Technology for High Pressure Diecasting Mold Filling Process,ZouFei/Huazhong University of Science and Technology,2/91
  33. Vertical position Fankou Lead mud and put sand sand key technology research,WangHuaiYong/Central South University,0/100
  34. Analysis about Applicability of Hele-Shaw Approximation of Filling Process in Injection Molding,MaLan/Zhengzhou University,0/33
  35. Micro injection molding filling process 3D simulations,JiaoLingKuan/Zhengzhou University,1/202
  36. Research on Anti-corrosion Technology of Injection and Production Wells of CO2 Flooding,LiShiGuo/Northeast University of Petroleum,0/130
  37. Numerical Simulation of Flow Field and Temperature Field of Aluminium Alloy Piston in Metal Gravity Casting Process,ZongRongRong/Hefei University of Technology,5/163
  38. Theoretical and Applied Study on the Strip-Filling Mining Technology Using Cementing Gangue in Long-Wall Face of Coal Mine,HuangWanPeng/Shandong University of Science and Technology,1/253
  39. Numerical Simulation of the Filling Stage of Micro-injection Molding in Slit Cavity,ZhuWenNa/Zhengzhou University,0/38
  40. Metal powder injection molding computer simulation,JiangZhongBing/Central South University,0/35

Total 1 Pages First Previous 1 Next Last

© 2012 www.DissertationTopic.Net  Mobile