Dissertation > Excellent graduate degree dissertation topics show

Metal powder injection molding computer simulation

Author: JiangZhongBing
Tutor: LiZuoXin；LiKun
School: Central South University
Course: Materials Science
Keywords: Powder Injection Molding filling process two-phase flow numerical simulation ANSYS/CFX
CLC: TF124.39
Type: Master's thesis
Year: 2009
Downloads: 35
Quote: 0
Read: Download Dissertation

Abstract


In this paper, the finite element analysis software ANSYS/CFX is successfully applied to simulate the filling process of Metal Injection Molding (MIM). On some desiderated problems of the filling process of MIM, what we have done is a series of fundamental studies and numerical simulation analysis.On the basis of analyzing the mechanics of MIM feedstock filling process, assuming that feedstock melt is homogeneous and incompressible non-Newtonian, whose flow type is laminar flow. Combining the hydrodynamic and thermodynamics theory, powder particles are supposed to be pseudo-fluid by Euler method, also recognized that the powder particles and the binder are mutually infiltrate continuous fluid. Then the mass equation, momentum equation and energy equation were deduced, and the mathematical model of powder-binder two phase flow for MIM was established. For the rheological character of MIM feedstock melt, the synthesis rheological equation is the best choice to describe the filling process, which have been fit and amendment with viscosity data. The mathematical description of flowing boundariy condition and diathermanous initial value condition was been discussion, and the front of the flowing melt is traced by VOF method.The algorithm and flow process chart had been studied, and the rheological equation of the MIM feedstock was added to the viscous models of ANSYS/CFX by second-developed, which was complied with CEL language and the system was reintegrated. This was the first time to apply the two phase flow mathematical medel to the filling process of MIM successfully by ANSYS/CFX. Take the test sample for example, the process of MIM feedstock filling sample cavity was simulated, and the simulation results were analyzed with the CFX-Post, mainly studied on the effects of the inlets position, injection temperature, injection velocity, injection pressure and predicted the conditions for some defects which often appeard in the filling process of the MIM. After adjusted the technological paramer, the simulation results were consistent with the experiment results in performance, and which certificated the feasibility and accuracy of 3D simulation on MIM filling process.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. Study of the High Temperature Gas-Liquid Two Phase Flow Rate Proportional Conrtol Valve,V233.2
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Study of Effect of High Temperature Seperator on Hydrodynamices in CFB Boiler Furance,TK229.66
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical Technology > Powder metallurgy (metal ceramic technology ) > Powder molding, sintering and post-processing > Molding process > Other molding
© 2012 www.DissertationTopic.Net  Mobile