Dissertation 

About 753 item dissertation in line with nozzle query results,the following is 1 to 50(Search took 0.073 seconds)

  1. Marketing Strategy for YTO Fuel Pump Co.,Ltd.,FuJinDan/Henan University of Science and Technology,0/4
  2. Study on Stability of the Nozzle-floating Plate Mechanism of an Air Lubricated Six-axis Force Sensor,ChenShiJing/Hefei University of Technology,0/0
  3. Characteristic Extracting Technology of Shower Nozzle Spray Field Images for Evaluation,LiRui/Tianjin University of Science and Technology,0/5
  4. The Study of Pesticide Droplets Atomization and Deposit Characteristics in Corn Leaves,ZhangWenJun/China Agricultural University,0/8
  5. Design and Test Research of Agricultural Aviation Electrostatic Sprayer,LiuPeng/Heilongjiang Bayi Agricultural University,0/4
  6. Design and Research of Electrostatic Spray Device,WangDan/Northeast Agricultural University,0/50
  7. Key Technologies Research Based on Air-suction Precision Seeder Radish,QuYuanHui/Hubei University of Technology,0/1
  8. Stress analysis and structure optimization of modular small reactor primary pump nozzle,WangChaoQun/Capital University of Economics,0/2
  9. Dual Fuel Nozzle Design and Numercial Simulation of Combustion Flow Filed,HeHongBin/Harbin Engineering University,0/47
  10. Schematic Design and Parametric Optimization of the Air-blast Atomizing Duel-fuel Atomizer,HuXiaoMing/Harbin Engineering University,0/29
  11. The Study on Diesel Nozzle Internal Cavitation Mechanism and Multidisciplinary Design Optimization,XingDeYue/Hunan University,0/24
  12. Cavitation Flow and Erosion and Carbon Deposition of Diesel Fuel in the Injection Nozzle,WoHengZhou/Hefei University of Technology,0/86
  13. Design of Test Bed to Dynamic Measure the Injection Effect of Piston Cooling Injector for Internal Combustion Engines,ZhangZuo/Huazhong University of Science and Technology,0/9
  14. Researches on the Influences of Nozzle Structure on Spray Characteristics for Diesel Engines,YanXueSheng/Jiangsu University,0/112
  15. A Numerical Investigation of High Pressure Fuel Spray Process Coupled with Nozzle Flow,XiaoDi/Beijing Jiaotong University,0/21
  16. Study on Injection Rate and Internal Flow Characteristics of Each Nozzle Hole of Multi-hole Diesel Injector,CuiHuiFeng/Jiangsu University,0/11
  17. Research on the Measurement of Temperature about the Standard Positive Nozzle Device,LiuQin/Tianjin University,0/2
  18. Hydrogen Premixed Combustion with the Addition of Methane in Micro-nozzle,WangWei/Zhejiang University,0/16
  19. Total Flooding Water Mist Fire Suppression Test and Numerical Simulation,ZhouQiang/Harbin Engineering University,0/17
  20. Research on Hydrodynamic Analysis and Optimization of Duct Propeller,ZhuJunFei/Wuhan University of Technology,0/39
  21. Study on the Thin Paver Emulsified Asphalt Spraying System,ChengYi/Chang'an University,0/4
  22. Numerical Study of Spray Cooling with Suddenness Blast-off of the Rocket Motor in a Magazine,XiongYanYi/Harbin Engineering University,0/22
  23. Design and Performance Simulation of Solid Rocket Motor Nozzle,HuYan/Xi'an University of Electronic Science and Technology,0/50
  24. Thrust Vector Modeling of Engine and Maneuvering Control of Advanced Fighter Aircraft,HuTianWen/Nanjing University of Aeronautics and Astronautics,0/16
  25. Research on Machining Processes for Body of Nozzle,WuZuoZuo/Dalian University of Technology,0/23
  26. Design and Experiment Technique Researches of High Load Micro Radial Turbine,XiaChen/Nanjing University of Aeronautics and Astronautics,0/21
  27. Research on Flow Properties and Thermodynamic Characteristics of Laval-type High Temperature Flow Rate Control Valve,LiHongZhou/Harbin Institute of Technology,0/30
  28. Research on Valveless Piezoelectric Pump with Asymmetric Nozzle/Diffuser Elements,FengLiNa/Zhejiang Normal University,0/49
  29. The Research on Venturi Feeder in Pneumatic Conveying System,HuKeJi/Qingdao University of Science and Technology,0/11
  30. Refractory Material Wet Spraying Machine Hydraulic System and the Device to Optimize the Design of Gunning,ZhangGang/Xi'an University of Architecture and Technology,0/7
  31. Research on the Performance Influence on the Variation of Structure and Technical Parameters of Double Nozzle Flapper Valve,LuXiangHui/Yanshan University,0/6
  32. Experiment Research and Numerrical Simulation of a Novel Absorber Using Liquid-Gas Ejector,WangRui/Dalian Maritime University,0/26
  33. Numerical Simulation and Experimental Study on Performance of CO2Adjustable Ejector,LiGuangFu/Tianjin University of Commerce,0/1
  34. Study of Filtration in Rotary Drum Filter that Removes Ashes by Air Suction with Suction Nozzles,DuBin/Jiangsu University,0/83
  35. Mechanism and Experiment of Vibrating Grid Demist,YuanWenBo/Wuhan University of Science and Technology,0/35
  36. Study on the Effect of Configuration of Swirl Nozzle Airway on the Performance of Ring Spun Yarn,LiuYuanYuan/Jiangnan University,0/11
  37. Simulation and Experimental Investigation of the Dynamic Yarn Behavior during Weft Insertion,HuKeQiao/Zhejiang University of Technology,0/3
  38. Study on Spining Process and Jet Vortex Spinning Nozzle Device Design,ChenLiang/Donghua University,0/15
  39. Research on Steel Flow Field and Heat Transfer in Mold for Casting Super-large Round Billet,SunLiMing/Yanshan University,0/74
  40. Study on Coupled Turbulent Flow Heat Transfer and Solidification during Twin-roll Strip Casting,FengXiaWei/Yanshan University,0/37
  41. Numerical Simulation of Flow Field and Surface Fluctuation of Molten Steel in the Mould for Wide and Thick Slab,ZuoGuanZuo/Inner Mongolia University of Science and Technology,0/22
  42. Mathematical and Physical Modeling Study of the Submerged Entry Nozzle for Thin Slab Continuous Casting,DongGuoQiang/Liaoning University of Science and Technology,0/22
  43. Research on Steel Fluid Flow and Taper in Mold for Casting Beam Blank,ShenQuan/Yanshan University,0/2
  44. Research on Deposition Growth Mechanism and Parameter Optimization of Double-nozzle Spray Forming,LiuTeng/Nanjing University of Aeronautics and Astronautics,0/4
  45. Research on Key Technologies of a High Pressure Waterjet Cutting System,SunXuDong/Huazhong University of Science and Technology,0/23
  46. Effect of MIG Welding Process and Post Weld Heat Treatment on Microstructure and Mechanical Properties of Al-12.7Si-0.7Mg Welded Joints,QiZhenYu/Northeastern University,0/5
  47. Optimal Design and Simulation Research of the Strip Steel Drying Device Rolling Mill Based on FLUENT,SunKai/Northeastern University,0/2
  48. Research on the Flow Resistance and Heat Transfer Characteristic of the Water-cooled Nozzle in the High-speed Wire Rod Rolling Process,LiuGuiChuan/Chongqing University,0/59
  49. Analysis of Nozzle External Flow Field and Design of Automatic Spray Systerm with Experiment Research,WangQiFu/Harbin Institute of Technology,0/20
  50. Analysis on Flow Field of Sand Blasting Technology and Research on Finite Element,YangGang/Beijing University of Chemical Technology,0/30

Total 16 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile