Dissertation > Excellent graduate degree dissertation topics show

The Investigation of Casting Martensite Precipitation Hardening Stainless Steels Impeller Materials and Technics

Author: LiRongPeng
Tutor: KangZuoPing；TanChaoZuo
School: Shenyang University of Technology
Course: Materials Science
Keywords: Investment centrifugal casting Martensite precipitation hardening stainless steels HIP vacuum heat treatment Strengthening and toughing mechanism.
CLC: TG260
Type: Master's thesis
Year: 2006
Downloads: 240
Quote: 4
Read: Download Dissertation

Abstract


The investigations on turbo compressor casting impeller’s material and casting, hot isostatic pressing and vacuum heat treatment technics.was made to replace welding impellers and milling impellers. It’s very important to save energy sources, decrease costs and shorten producing periods.The test material is ZG0Cr13Ni5Mo2Cu2Nb, which is named FV520(B) generally. The casting methods include investment static casting and centrifugal casting. The hot isostatic pressing (HIP) and vacuum heat treatment are made after casting. The test analyses the effects on smelt and casting to ZGOCr13Ni5Mo2Cu2Nb steel’s mechanical property and impeller’s shaped quality. The centrifugal casting in vacuum furnace with electroslag remelting steels is best method.HIP improves the strength, plasticity, toughness and fatigue resistance. Homogenizing treatment can makes steel’s chemical composition more even, and homogenizes microstructure so that it improve integrate mechanical property.The solution treatment temperature of ZGOCr13Ni5Mo2Cu2Nb steel is 1100℃ mostly. Considering heat treatment deformation and cost, the solution treatment temperature may be 1050℃ too. Following middle treatment increasing, the material’s strength and hardness increase and it’s plasticity and toughness decrease appreciably. The material gain higher plasticity and toughness with middle treratment at 750℃ commonly, and gain higher strength at 850℃.The intensity peak value aging temperature of ZGOCr13Ni5Mo2Cu2Nb steel is between 450 and 500℃, and it’s toughness peak value aging temperature is between 610 and 640 ℃.

Related Dissertations

  1. The exoskeleton elderly assisted walking device designed,TH789
  2. Comparison between Two Method for Femoral Neck Fractures in Elderly,R687.3
  3. The Early-stage Clinical Research of Preservation of the Femoral Neck in Total Hip Arthroplasty,R687.4
  4. Clinical Research on the Combined Surgical Operation with Osteotomy Around Acetabulum Treating the Older Developmental Dislocation of the Hip,R726.8
  5. Clinical Research on the Modified Treatment of Pemberton Surgical Operation of the Developmental Dislocation of the Hip,R726.8
  6. Interrelationships between Insulin Resistant Syndrome and Benign Prostatic Hyperplasia,R697.3
  7. The Value of Proximal Femoral Geometric Structure and Bone Mineral Density in Evaluating the Risk of Hip Osteoporotic Fracture,R683
  8. The Preliminary Result of Metal-on-metal Total Hip Arthroplasty,R687.4
  9. Case Report Penetrating Fracture of Acetabular Cup after Total Hip Arthroplasty,R687.4
  10. Clinical study of artificial joint replacement and intramedullary fixation for the treatment of unstable intertrochanteric fractures,R687.3
  11. Correlation between Femoral Offset Restoration and Function Recovery after Total Hip Replacement,R687.4
  12. The Clinical Observation on the Conservative Treatment of Developmental Dislocation of the Hip,R726.8
  13. Results of Link Lubinus Classic Cemented Femoral Stems Prosthesis in Hip Arthroplasty,R687.4
  14. Research on the Relationship between Body Mass Index and Hip Fracture in Chinese Women,R683
  15. Dynamic Contact and Wear Prediction of Metal-on-Metal Hip Joint Replacements under Transient Walking Condition,R131
  16. Mechanical Characteristics of Knee and Activity Characteristics of Knee Muscles during Flexion and Extension at Different Hip Angles,G804.2
  17. Expression of Estrogen Receptor and Morphological Change in the Hip Joint Capsule and the Femoral Head Cartilage of Developmental Dislocation of the Hip,R726.8
  18. Metal on Metal Total Hip Replacement in the 50-year-old Femoral Head Necrosis Following the Application,R687.4
  19. Cementless Total Hip Arthroplasty for Hip Ankylosis in Patients with Ankylosing Spondylitis,R687.3
  20. The Comparison of the Effect of Different Anesthetic Techniques on the Total Hip Replacement Surgery of Elderly Patients,R614
  21. Comparative Efficacy of Hip Arthroplasty and Internal Fixation for the Treatment of Unstable Intertrochanteric Fractures in Elderly Patients,R687.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Steel Casting > General issues
© 2012 www.DissertationTopic.Net  Mobile