Dissertation > Excellent graduate degree dissertation topics show

Research on Ultrasonic Detection Technique of Flux and Pressure for Hydraulic System

Author: HeWei
Tutor: HuangXiZuo；XiaoXinZhong
School: Chongqing University
Course: Control Engineering
Keywords: Hydraulic System Ultrasonic Detection Time Difference Data Acquisition Signal Processing
CLC: TP274.5
Type: Master's thesis
Year: 2005
Downloads: 310
Quote: 3
Read: Download Dissertation

Abstract


Hydraulic system have been used widely, with light structure, large transmission ratio and running placidity, in weapons and equipments in the Second Artillery Troop. Compared with electrical or mechanic system, hydraulic system have the disadvantages of high fault frequency and difficulties to diagnosis, which have greatly effected battle effectiveness in warfare. Flux and pressure parameters which hold the state information of hydraulic system, are the foundation of fault diagnosis. The traditional interposed measurements have trouble in disassembly and bad impact on hydraulic dynamic characteristic, which doesn’t suit high speed fault diagnosis for weapons and equipments. A new method for non-interposed testing to the flux and pressure parameters is proposed with ultrasonic. Based on the new method, on-line fault diagnosis for weapons and equipments is achieved.According to the high dispersedness and low precision of measurements when using the traditional time difference method in small diameter and low flow rates conditon, this paper brings forward a new method based on high-speed data acquisition technique. The time difference comes out accurately with high resolving ability of time by using the method and the signal processing algorithms.The developed ultrasonic detection system is composed of two ultrasonic detectors, a transmitting and receiving ultrasonic unit, a high-speed data acquisition unit and a computer. The system accomplishes ultrasonic pulse transmitting and receiving, signal amplitude adaptive adjusting, data acquiring, echo searching, data processing and analyzing. Different algorithms for echo searching, filtering and time difference measuring are proposed based on the thorough analysis of ultrasonic echo signal. By means of the echo auto-searching algorithm, the automatization of signal processing is realized. The filter algorithms are given to eliminate electric and pulse noise, the measuring reliability is improved greatly. Furthermore, the accuracy of time difference measure is improved greatly by using the correlation algorithm and the wavelet algorithm. The realizing methods for the algorithms are presented also.A hydraulic experiment system is established to simulate the different states of hydraulic system, with a pump, several valves, turbo-flowmeter, pressure gauge, and many hydraulic pipelines of different diameter.Experiment indicates that the convenience, speedness, precision and reliability of

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Design of Testing Equipment for Electronic Products,TN06
  3. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
  4. The Design of Telescopic Asphalt Spraying System,U415.524
  5. Design and Realization of Launcher Integrated Test System Based on DSP and FPGA,TJ06
  6. Self-rescue System Design and Implementation for AUV,TP242
  7. Design of a Data Acquisition and Monitoring Terminal Based on ARM Embedded Linux,TP274.2
  8. The Study of Power Quality Realtime Monitor System Based on DSP,TM933.4
  9. Design and Implementation of the monitoring system of the mine site,TP277
  10. Study on Harmonic Additional Loss Monitoring Method and Experiment of Distribution Transformer,TM421
  11. Simulation and Study on Tile Press Hydraulic System,TQ174.62
  12. Design of Anemometer Based on Real-Time Cross-Correlation Theory,TP212.1
  13. ARM-based GPS / SINS integrated navigation system design,TN967.2
  14. The Research and Implement of Direction-finding and Signal Processing Technology,TN97
  15. Design of a Data Acquisition System Based on Embedded System for the Wellthead Back Pressure Decreasing Device,TE938
  16. Study on the Technology of LabVIEW in Shuttle Kiln Combustion Monitor and Control System,TP277
  17. Research on Distributed Network Intrusion Detection System Based on Application Protocol Analysis,TP393.08
  18. Control access to production data acquisition system based on network,TP393.08
  19. The Study on Gyroscope Micro Vibration Test and Analysis System,TP274
  20. Design and Research on Data Acquisition System of SEEE Model and Sensor Placement Optimization,TP274.2
  21. Design and Realization on the System for Gravimeter Data Acquisition and Online Processing,TP274.2

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Automatic detection system using a variety of new technologies
© 2012 www.DissertationTopic.Net  Mobile