Dissertation > Excellent graduate degree dissertation topics show

Tapped the analysis and design of microwave filters

Author: ZhengQingKuo
Tutor: WangXiLiang
School: University of Electronic Science and Technology
Course: Electromagnetic Field and Microwave Technology
Keywords: Tapped line Microwave filters Parameter extraction Combline Interdigital line Direct coupled
CLC: TN713
Type: Master's thesis
Year: 2006
Downloads: 573
Quote: 2
Read: Download Dissertation

Abstract


With the rapid development of modern microwave communication techniques, the spectrum is becoming more and more precious and crowded. The requirements for microwave filters with high selectivity, low loss, small size and low cost are increasing, which promotes the deeper research for the microwave filters.The tapped line input\output block with compact structures and flexible design method, was studied by many designers in the sixties and seventies of last century. But it is because the weak precision, hard tuning and long design period of traditional equivalent circuit method influences the development and wide use of this block.Now days, with the improvement of computer capacities and technique of microwave CAD, the precision and efficiency of the high frequency simulation softer is raising highly. So we can associate the equivalent circuit method with the softer of high frequency simulation, to improve the characteristics and shorten the design period.The purpose of this paper gives the deeper research of tapped line microwave filters, to provide the fast and precise design for the kinds of filters. The main works are as follows:1. The paper systematically describes basic concepts and theories that form the foundation for design of general microwave filters. The topics will cover filter transfer function, lowpass prototype filters, frequency transformations, immittance inverters and the passband insertion loss under the influence of the dissipation of filter elements2. The tapped line I/O block and the internal coupling structure is systematically analyzed. Two methods of analysis and design programs of filters are given .3. Some examples of filters are designed for special requirements, including combline, interdigital line and direct coupled. The analysis of any kinds is also given. At the last of partial examples, simulation results and measurements are given, which agree well with each other.In all,the paper systematically studies the tapped line microwave filters. The filters with compact size and good property are great suitable for the engineering.

Related Dissertations

  1. The Study on Methods of Rock Physical Properties Extraction from Elastic Impedance and Its Application,P631.4
  2. Research and Design of Voiceprint Recognition System for Specific Human Group,TP391.4
  3. Study on Identification and Parameter Extraction of Continuous-wave Radar Signal,TN957.51
  4. Basic and Applying Research of Metamaterial in Microwave Band,TN015
  5. Interconnect Crosstalk Estimation and Delay Optimization Based on 65 Nanometer CMOS Technology,TN47
  6. Modeling and Amplifier Design Based on AlGaN/GaN HEMTs,TN386
  7. Parameter extraction of RF and microwave integrated circuits integral equation method and applied research,TN45
  8. 0.8μm SOI/CMOS SPICE Device Model Parameter Extraction,TN386
  9. DC-DC converter control circuit design with automatic restart function,TM46
  10. A power VDMOS HSPICE macro model,TN386
  11. Adaptive receiver front-end tuning filter,TN851
  12. Research on Library Building of VDSM Memory,TN405
  13. Extraction of interconnect transmission line parameters based on the finite-difference time-domain (FDTD) method,O453
  14. Research on the Analysis of Microwave Andhigh-speed Circuits with Parameters Variation in a Broad Region,TN454
  15. Neural Network Based Microwave and RF MOSFET Modeling,TN386.1
  16. The Contour Detection Model and Fiber Recognition & Classification with Cross-Sectional Image of Blended Yarns,TP391.41
  17. Study of the Large-signal Model for Field Effect Transistors,TN386
  18. Modelling and Study of Passive Wireless Impedance-loaded Sensors Based on SAWRs,TP212
  19. Parameter Extraction Methods for Modelling HBT and Researches on InP-Based Monolithic Integrated Device,TN322.8
  20. Research on the Key Technologies of Hyperspectral Remote Sensing Environment Monitoring System and Its Applications to Water Resources,TP79

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Basic electronic circuits > Filtering techniques,the filter
© 2012 www.DissertationTopic.Net  Mobile