Dissertation > Excellent graduate degree dissertation topics show

Gantry planer simulation equipment design

Author: XuLi
Tutor: ShiZuo
School: Suzhou University
Course: Electronics and Communication Engineering
Keywords: double-housing planer DC digital drive PLC control
CLC: TG551.2
Type: Master's thesis
Year: 2011
Downloads: 16
Quote: 0
Read: Download Dissertation


Double housing planer, the one of the main machine tools in mechanical industry, occupies an important position in industrial production. Its typical electrical control system is good for Mechanical and electrical and automation related specialized student to study. But although the A series double housing plan’s electrical control system is typical, but because of its old age, It is the lack of new technology injected. This task is based on carefully analyzing and researching the original control system of the planer, which aiming to overcome the drawbacks of the original system and add some new technology. This program uses a programmable logic controller as the control core, as well as the DC digital drive as a speed control unit for the DC drive system.The specific plans are as follows. First, in order to add the system reliability, this paper uses Mitsubishi FX2N type PLC to replace the original relay control parts. Second, it reserves the original ac motor control sections (such as the ventilator, electric fan, lubrication pump, lifting motor, clamping motor, etc) and tool lifting parts, and uses the DC digital drive instead of the old DC transmission units. Moreover, this new system adds the HMI, it can show the planer’s operation in various pictures. We also can use the HMI simulator in teaching.This paper gives the working principle and the concrete realization of the whole hardware circuit system (including the motor drive circuit, the PLC wiring diagram, analog signal given circuit of 6ra28 and so on). Then specify the software design of the whole system and the parameter setting of the DC speed regulating device. Aiming at the realization of Double housing planer’s each function and programming method it also gives the detailed description.

Related Dissertations

  1. Program based on DC digital speed planer electric control system,TG55
  2. CNC spiral bevel gear lapping machine lapping motion control and PLC,TH132.41
  3. 1024 # the deviated winch control system,TD55
  4. Pine Mine No. 3 Shaft hoist monitoring system,TD633
  5. Research on Automatic Transmission Technology and Electronic Control System of Engineering Vehicle,U463.2
  6. Modeling and Intelligent Control of a Rotary Dryer,TP273.5
  7. Design and Implementation of Electrical Control System for Musical Fountain,TM571.61
  8. Research of the Control System of TZG216-110-Type Iron Roughneck,TP273
  9. The Research and Exploitation of the Wood Compressing Machine Based on PLC Control System,TP273.5
  10. The Research of Intelligent Test and Control System for Induction Motor,TM307
  11. Electronic control system for a large planer,TG551
  12. Blast furnace blast furnace hydraulic system frequency energy saving,TF321.5
  13. PLC to turn oil drain process,TP273
  14. Application and Study on Air Condition Electric Appliances of 19K Type Soft Sleeping Train,U270.383
  15. The Research of Control System for Condenser-cleanout Robot in Thermal Power Plant,TP242.2
  16. The Development of Control System for Rail Derusting Machine Tool,TG174
  17. PLC-based Medical Pure Water Disposal System,TM921.51
  18. High Power Shunt Device Monitoring System,TF351
  19. The Automatic Material Transportation System Design for Liquid Ammonia Treatment Equipment for Cotton and Baster Fiber,TP273
  20. Design and Realization of Marine Fuel Supply System,U664.1
  21. Ultra-high-power Short-circuit Switch Group to be Designed and Controlled,TM564

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Planing machining,planer, slotting machine ( Li plane ) > Workpiece movement planer > Double column planer ( gantry planer )
© 2012 www.DissertationTopic.Net  Mobile