Dissertation > Excellent graduate degree dissertation topics show

Experimental Research of Substrate Works on Polymer Crystallization

Author: RuanMianZhao
Tutor: FanZuoRun
School: Zhejiang University
Course: Mechanical and Electronic Engineering
Keywords: HDPE static isothermal crystallization rate substrate surface Roughness interfacial tension grayness luminous flux
CLC: O631.3
Type: Master's thesis
Year: 2006
Downloads: 108
Quote: 0
Read: Download Dissertation

Abstract


Many well-known factors including cooling rate, stretching and shearing that affect the ratio of polymer’s crystallization. In our research work we found some possible factors are also connected with polymer’s crystallization such as the interface energy between the polymer melt and the substrate, the surface roughness and heat emission of the substrate. In our experiments a high density polyethylene (HDPE) was used through optical and rheological measurements. Primary task are as follows:1. Polymer material, application foreground and the main properties of HDPE, the effect of crystallization rate on properties of product, and the factors that affect crystallization rate of polymers, the basic theory and research methods of polymer’s crystallization, and the concept and measuring method of interfacial tension were introduced.2. The experimental equipment was constructed, including Cell design, pedestal and bracket design, expounding choice of flowmeter, galvanothermy equipment design, design and principle of control circuit and so on.3. The conception of figure image, MATLAB image type、color model and the conversion of different color model were introduced. Then taking the image grayness change as a characteristic means of crystallization rate. The feasibility of this method was investigated by experiment. A conclusion was drawn from the experiment that at the same temperature, the fastest isothermal crystallization rate of HDPE is on the aluminum plate, and slowest is on the stainless steel plate for the three similar plates made of aluminum、brass、 stainless steel. The possible factor that affects the crystallization rate is the interface character between HDPE and substrate, and interfacial tension was measured through experiment.4. Taking the change of luminous flux through HDPE melt as another characteristic means when it was in the progress of static isothermal crystallization. The basic producing condition and constructure of laser implement especialy PR-102 aptitude multicenter photometer in experiment were introduced. The same crystallization order

Related Dissertations

  1. Study on Wastewater Purification Effect of the Free Surface Wetland with Different Substrates and Plant Combination,X703
  2. Study on Industrialized Breeding Substrate Formula of Main Plantation Tree Species in Ningbo,S723.1
  3. Effects of Fermentive Cornstalk Culture Medium Mixture Ratio on Physical and Chemical Characters in Potted Peony,S685.11
  4. Predicting the Coupling Effects of Water and Nitrogen on External Quality of Standard Cut Chrysanthemum in Solar Greenhouse,S682.11
  5. Studies of the Distribution of Mineral Elements with Different Substrate Treatments of Paeonia Suffruticosa in Pot,S685.11
  6. Effect of Different Amendments on Soil Microbial Ecology,S154.3
  7. Structural and Functional Studies of Saccharomyces Cerevisiae Aldo-keto Reductase Gre2,Q936
  8. A New Method of Separating HDPE and PP with an Improved Barrier Screw,TQ320.52
  9. The Effect of Different Microwave Polymerizations on Accuracy and Physical Properties of Denture Base Resin,R783.6
  10. Comparison of the Physical and Mechanical Properties Among Four Kinds of Die Stone Casts,TQ177.3
  11. Sink-float Separation and Recovery of the Mixture of HDPE/PP,TQ325
  12. Study on the Properties of the Mixed Systems with Betaines,TQ423.3
  13. Study on Cascade Techniques for Substrate Integrated Waveguide Dual-mode Filters,TN713
  14. The Effect of Substrate Stiffness on Hepatic and Hepatoma Carcinoma Cell Mobility,R735.7
  15. Effect of the Rubbing and Wearing Behavior of Steel Rail by Ultrasonic Peening,TG115.58
  16. Study on Uniformity and Tribological Behavior of DLC Film on Surface of Ceramics,TG174.453
  17. The Interfacial Property of Surfactant,O647.2
  18. Power Generation of Sediment Nicrobial Fuel Ceel Based on Substrates Types,TM919
  19. Investigation on Mechanical Buckling Behavior of Flexible Solar Cells,TM914.4
  20. Studied on Electricity Production from Surplus Sludge Using Microbial Fuel Cells,TM911.4
  21. Research on AC Transport Losses and Quench Propagation Characteristics of High Temperature Superconducting Tapes,TM26

CLC: > Mathematical sciences and chemical > Chemistry > Polymer chemistry ( polymer ) > Polymer physics and physical chemistry of polymers > The chemical nature of polymers
© 2012 www.DissertationTopic.Net  Mobile