Dissertation > Excellent graduate degree dissertation topics show

The Study of Vector-controlled System for Induction Motor by Stator Voltage Decoupling

Author: TianQing
Tutor: LiaoYong；BaiYunQing
School: Chongqing University
Course: Electrical Engineering
Keywords: induction motor sensorless vector control
CLC: TM343
Type: Master's thesis
Year: 2005
Downloads: 168
Quote: 0
Read: Download Dissertation

Abstract


Three-phase induction motor is a non-linear, multivariable, high-order and close coupling system. It’s torque isn’t controlled as the DC motor. But induction motor is controlled as the DC motor by vector control .While sensorless vector control technique can makes the relative inductor motor drive easier, more economical and more reliable. For this reason.the sensorless vector control is becoming the more important researching project.Firstly, the dynamic mathematical model of inductor motor is analysised and studied under static reference frame. Then through coordinate transforming, the mathematical model of inductor motor in terms of flux linkage is deduced. The rotor flux linkage control and torque control based on the rotor field orientation control are separately achieved.Secondly, based on the rotor field orientation vector-controlled, Error signal of the stator M, T-axis current in the synchronous reference frame is utilized to attain the induction motor voltage compensation. And error signal of the stator T-axis current is utilized to attain the induction motor speed, This speed estimation method is simple and has self-adaptability. Because classical PI controllers is used, the structure of the sensorless vector control is very simple.Thirdly, based on MATLAB , a simulation model of the proposed vector control sysem is established. In this model, because of adopted PU of controlled variables, the system has high self-adaptability and parameters of PI controller are easy to be adjusted; The simulation model is a discrete control system and in this system sample period of different signal is different; To improve the system dynamic and static performance ,a compensation method of the phase shift caused by discrete system is presented .Finally,dynamic and static characteristic of induction motor are simulated. Simulation results demonstrate that the proposed vector control system is feasible and valid.

Related Dissertations

  1. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  2. Study on DSP-Based Four-Quadrant Control System of Induction Motor,TM346
  3. Research on Vector Control System of Induction Motor Based on DSP,TM346
  4. The Research of Control System of Permanent Magnet Synchronous Motor Based on DSP,TM383.42
  5. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  6. Study of the Speed Sensorless Vector Control System by EKF,TM34
  7. Research on Permanent Magnet Synchronous Motor Vector Control System Based on Dead-Time Compensation,TM341
  8. Research on Speed-sensorless Vector Control System Based on MRAS for Asynchronous Motor,TM343
  9. The Designation of Permanent Magnet Synchronous Motor AC Servo System Basing on DSP,TM921.541
  10. Simulation analysis of permanent magnet synchronous motor power factor,TM341
  11. Research on Sensorless DTC of PMSM Based on Sliding-mode Observer,TM341
  12. Control Strategy Optimization of Induction Motor for Fuel Cell City Bus,TM343
  13. The Optimization of Stator’s Structure of Large-Scale Induction Motor,TM343
  14. Research on Performance of Sensorless PMSM Vector Control System Based on EKF,TM341
  15. Study on Switched Reluctance Motor Drives without Rotor Position Sensor,TM352
  16. Study and Design on High-Reliability Eletro-Machanical Actuator,V249.1
  17. The Application and Analysis of Induction Motor Speed Control in Yangliuqing Power Plant,TM346
  18. The Research on Sensorless Control for PMSM Based on DTC-SVM,TM341
  19. Sensorless Direct Torque Control of High Speed PMSM,TM341
  20. Research of Sensorless Control of Permanent Magnet Synchronous Motor Based on High Frequency Signal Injection,TM341
  21. Study on Load Model Aggregation of Electric Power Systems,TM714

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Induction motor
© 2012 www.DissertationTopic.Net  Mobile