Dissertation > Excellent graduate degree dissertation topics show
The Numerical Analysis of Mechanical Behavior of Sluice Structure and Foundation
Author: HuangLiBing
Tutor: ZhangLiYong
School: Sichuan University
Course: Hydraulic Structure Engineering
Keywords: sluice structural design finite element method numerical simulation deep and thick overburden layer
CLC: TV223
Type: Master's thesis
Year: 2006
Downloads: 214
Quote: 1
Read: Download Dissertation
Abstract
|
Our country is a region broad nation which has abundant of water resources. In the past fifty years, the hydraulicians have built many sluices. Yet in the built hydraulic engineerings, a lot of sluices are built on deep and thick overburden layer. How to deal with these technical matters of building sluice on deep and thick overburden layer, optimize lock basin structure design and save on investment is one of people concerned problems. The influence that deep and thick overburden layer to the lock basin structure and their interaction need hydraulicians further research. In the sluice design, the variation of stresses of lock floor acting on soft foundation is the most concerned problem for designers. According to the method of elastic grade beam, I compile a small calculated programme with FORTRAN. Combined with the basic document about the real engineering FU TANG hydropower station, this paper selects the 2# sluice lockage chamber as calculated model. This paper analyses the factors such as deformation modulus, thickness of hollow quoin, thickness of lock floor and width of lock gate how to influence on endogen force of lock floor.Applying the software of ANSYS, I establish a 3D-finite element model of the 2# sluice lockage chamber of FU TANG hydropower station. Based on the calculation result, this paper analyses the displacement and the stress distribution of
|
Related Dissertations
- The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
- Study on Springback of High-Strength Steel Stamping,TG386
- Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
- Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
- Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
- Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
- High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
- The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
- Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
- Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
- Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
- Numerical Simulation of Biomass Direct Reburning,TK16
- Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
- Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
- Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
- Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
- Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
- Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
- Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
- Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
- The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
CLC: > Industrial Technology > Hydraulic Engineering > Hydraulic investigation of hydraulic design > Foundation and its reinforcement
© 2012 www.DissertationTopic.Net Mobile
|