Dissertation > Excellent graduate degree dissertation topics show

Visual Modeling and Simulation for the Special CNC

Author: WangJian
Tutor: LiuJie
School: Northeastern University
Course: Mechanical and Electronic Engineering
Keywords: Kinematics and Dynamics Transfer Function Responds Numerical Control Technology COSMOS Solution Error Compensation
CLC: TG659
Type: Master's thesis
Year: 2008
Downloads: 63
Quote: 0
Read: Download Dissertation

Abstract


5-Axis numerically-controlled machine tool is in the present numerical control domain widely applies moreover the quite practical one numerical control processing equipment. It may complete many complex surfaces and the curve processing, as early as at the beginning of numerical control technological development; the people are engaged in this technical on the investment massive energy and the time the research.This article takes 5-Axis numerically-controlled machine tool’s mechanism as the analysis object, the research numerically-controlled machine tool mechanism transmission and the state of motion. Through prototype’s visualization modeling and the actual transformation, study the machine mechanism dynamics question.(1) The linear transmission system was in the numerically-controlled machine tool uses the most frequent transmission system; this article unifies prototype’s full-scale mockup and responds two aspects from the structure to make the multianalysis to prototype’s transmission system. And includes, derives the prototype transmission system the transfer function, solves the prototype transmission system the step response and the static error, summarizes the transmission system intrinsic property the influence which produces to the system and so on several aspects. For better grasps the prototype transmission system the rigidity and the stress distortion situation, this article has made the finite element analysis to prototype’s main transmission part with the COSMOS software.(2) In the multi-rigid dynamics rationale, infers the prototypical cutting tool and the main participation moving link’s kinematics and the dynamic equation.(3) In view of prototype’s full-scale mockup, makes dynamics simulation with the ADAMS software to the prototype. Simulates the cutting tool to make situation and so on in translation, circular processing paths, studies prototypical each primary member in parameter and so on time starting, acceleration, steady movement speed, acceleration and stress change situations.(4) Summarizes each kind of influence engine bed precision disadvantage factor which in the prototypical actual transformation process appears, studies reason which the engine bed error produces, and attempts reduces and compensates these errors. Many domestic numerically-controlled machine tool production manufacturer selects the import control system, the numerical control software, the transmission part assembly numerically-controlled machine tool, actually has not been able to achieve the complete machine performance which the import numerical control equipment has. Many reasons have created this phenomenon. This article take the machine transmission response and the machine dynamics question as the research breakthrough point, in coor with progress of production practice, attempts to seek for one kind to be able to improve the numerical control equipment overall performance the method.

Related Dissertations

  1. Study of Inhibitors of Aluminum Anode in NaCl Solution,TG174.42
  2. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  3. Research on Spaceborne Hyperspectral Sensor Simulation,TP391.9
  4. Modeling Analysis and Slip Estimation for Lunar Rovers,TP242
  5. Traveling Wave Solutions for Two Classes of Nonlinear Wave Equations,O175.29
  6. Professor Wang Yinglin academic thought and clinical experience and treatment of the palate and features of drug research in the original look of the children cold fever,R249.2
  7. The Historical Investigate of Gu Tian Reservoir Region Migration,D632.4
  8. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  9. The Study and Application of the Generalized Hamiltonian System with Spherical Foliation Structure,O175
  10. Integrable Discretizations to a Class of Soliton Equations,O175.2
  11. The Research on Nonsingular Solution of the Sylvester Equation Based on Quadratic System Decoupling,O175
  12. American Option Pricing under Stochastic Market Option Model Based on Dividend and Treatment Fees,O211.6
  13. System solver based on the three-dimensional conditions of the mine ventilation network,TD724
  14. Tolerance of Tomato on Rare Earth Elements and Its Remediation Potential on Polluted Environment,S641.2
  15. Influence of Different Plant Growth Regulators on Vase Life and Physiological Action of Cut Chrysanthemum,S682.11
  16. Effect of Modes of Ridge and Nutrient Solution Irrigation on Cucumber Cultivation and Transport of Water and Salt in Soil,S642.2
  17. The Application of Different Particle Size Peanut Shell Added by Wetting Agent and Nutrient Solution in Cucumber Nursery,S642.2
  18. Some Pharmacology and Toxicity of Three Prescriptions from Chinese Veterinary Pharmacopoeia,S859.5
  19. Study on Pretreatment of Clarification with Extracting Solution from Silkworm Dropping,TQ461
  20. Effects of Different Light Quality and Nutrient Composition on the Growth and Tipburn Incidence of Lettuce,S636.2
  21. Reflecting on the Problem of Higher Vocational Education’ Project-Based Curriculum Development,G712.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile