Dissertation > Excellent graduate degree dissertation topics show

No. 1 orebody southern Fengshan Copper Deposit stope structure parameters and optimization of mining sequence

Author: YueBin
Tutor: GuoZhongLin
School: Kunming University of Science and Technology
Course: Mining engineering
Keywords: numerical simulation ANSYS optimal structural parameters mining order
CLC: TD862.1
Type: Master's thesis
Year: 2009
Downloads: 62
Quote: 0
Read: Download Dissertation

Abstract


The Fengshan Copper has been adopted underground mining instead of surface mining,so it is important to make structural parameters and mining order in order to mine underground mineral Resources safely and effectively. This thesis use the method of three-dimension finite element numerical simulation to research. This method has been widely used in the field of geotechnical engineering and underground mining is an important branch of geotechnical engineering. what this thesis discuss is how to use this technology to solve the optimal research of stope,a special kind of underground engineering,thus to exploit and employ the underground mineral resources at the maximum and be security and efficiency at the same time.This thesis mainly combines the practical mining circustances of Fengshan Copper’s south deposit, and research on different mine room、pillar and different mining toward effect about stope’s security and stability by using ANSYS numerical simulation software. The main contents of the research include the following:(1) This thesis collected Fengshan Copper Mine’s information about Mining geology、Conditions of ore occurrence、the status quo of mining、development form、mining methods。(2) This thesis Summarized the history、current situation and development trend of the domestic and abroad research about structural parameters of stope and optimization mining order and pointed out the necessary and urgency of structural parameters of stope and optimization mining order.(3) This thesis analysed the data of mechanical parameter of rock and combine practical condition of ore-rock, calculate the mechanical parameter of rock by reduction, these supply the basic data for follow-up research.(4) This thesis used ANSYS software to found the numerical simulation model of twelve different parameters of southern deposit NO.1 orebody, and analyse the stress and displacement of ore-rock that under different structural parameters of stope, and then determine the most reasonable structural parameters of stope:mine room 10 m, pillar 6 m.(5) This thesis found four different mining order model on the base of certain structural parameters of stope. After simulation Analysis of them, it comes out that the most reasonable mining order is recovering from one side to another side.(6) This thesis Summarized the research this thesis refer to that about structural parameters of stope and optimizing the mining order, and advanced it will be a very important topic in the research about this area.This paper has a certain practical significance for guiding Fengshan Copper to determine reasonable structural parameters of stope and mining order. The Methods and results of research can also provide reference and refers for other mines solving similar problems in the technical reform and technical updating.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Industrial Technology > Mining Engineering > Mining > Metal ore mining > Non-ferrous metal mining > Copper
© 2012 www.DissertationTopic.Net  Mobile