Dissertation > Excellent graduate degree dissertation topics show

Research on the Aiming Signal Processing of the Optical Probe Measurement System

Author: LiuQingQing
Tutor: PuZhaoBang
School: Harbin Institute of Technology
Course: Instrument Science and Technology
Keywords: Topography Optical Probe Measurement Circuit Design Data Acquisition
CLC: TH74
Type: Master's thesis
Year: 2008
Downloads: 47
Quote: 0
Read: Download Dissertation

Abstract


Surface metrology is an important field of geometry metrology. With the rapid development of such technologies as miniaturized machining, micro-optical, micro-electronics and micro-mechanics, the 3-D measurement of many specimens require high accuracy. As well as the request of the measurement accuracy for the large size object is much higher. How to measure the 3-D surface topography of specimens quickly and accurately has become a challenge in field of modern micro-measurement.This research on aiming signals measuring and processing system is based on the project“Multi-Probe Topography Measurement System”. Based on the differential confocal microscopy technology, the project is to develop a surface measurement technique with high accuracy, resolving power and non-contact mode. Moreover, the aiming probe as the device for signals collection plays an important part in the high accuracy topography measurement system.Firstly, this paper explains the measurement principle of differential confocal optical probe measurement system particularly, and analyses the loss of the light intensity of the light beam through the optical devices. It also brings out the light signal take-over and transformation circuit design, and the electricity signal processing method.It describes the design of the aiming signals measuring and processing, especially the characteristic of the electrophotonic detector and its preamplifier, which is used for I-V transformation. Afterwards, it shows the variable gain amplifier, the low-pass filter, the subtracter, adder and comparator design in detail, introducing the knowledge about the data acquisition, the software program of the data acquisition.Finally, every part of the system is tested by simulative experiments. It proves that all the parts are available for the optical probe measurement system.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Research on Synchronous Acquisition and Processing System Detecting Defocus Signal Based on DSP,TH741
  3. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  4. Design of High-Speed Data Acqusition Board Based on Signal Integrity Analysis,TP274.2
  5. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  6. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  7. A High-Speed Data Acquisition System Based on USB2.0,TP274.2
  8. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  9. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  10. The Principle Research and Implement of the Acoustic Keyboard for Computer,TP334.23
  11. Research on the Down-hole Data Sampling and Transmission Method,TE938
  12. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
  13. The Detecting and Analyzing System Online of Welding Quality Based on LabVIEW,TG441.7
  14. The Study of Verification Technology and Device of Ion Chromatography,O657.75
  15. Distribution Network Fault Data Acquisition and Processing Based on FPGA,TM862
  16. The Research and Realization of the Multi-platform Integrated Automation Control-monitoring Communication Process System,TM769
  17. Research on Friction-wear Experimental Device and Wear Experiment for Traveling Wave Type Ultrasonic Motor,TM359.9
  18. The Research on Data Acquisition System Based on Electronic Transformer and Transmission of Sampled Value,TM452
  19. Design and Realization of Launcher Integrated Test System Based on DSP and FPGA,TJ06
  20. Development of Wake Signal DAQ System Based on LABVIEW and USB Interface,TP274.2

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Optical instruments
© 2012 www.DissertationTopic.Net  Mobile