Dissertation > Excellent graduate degree dissertation topics show

Research of Neutral Point Grounded Mode for Medium Voltage Network

Author: WangBiPing
Tutor: KangZhongJian
School: China University of Petroleum
Course: Control Theory and Control Engineering
Keywords: medium voltage network neutral point grounded mode arc-suppressing coil capacitive current automatic tuning suppression-coil
CLC: TM862
Type: Master's thesis
Year: 2010
Downloads: 97
Quote: 0
Read: Download Dissertation

Abstract


The grounded mode of power system is related to technical, economic, secure and other various aspects and it is one of the foundations of security and stability operation of the power system. It is great significance to the secure and economic operations of the power system. With the growing capacity of grid and increasing voltage levels, the original neutral point grounded mode can not meet the requirements for the development of the power system.In the power system with all sorts of voltage levels, phase-to-ground fault is the main form of the fault, occupied 70% of the total to malfunction. Since no short-circuit loop is formed so that the fault current is small and the three phase line to line voltages are still symmetric when single-phase to earth fault occurs in a non-solidly earthed network, the load can be in normal operation for a period of time. But after the fault, the non-grounded fault phase voltage would increase, discontinuity grounded arc still can produce arc voltage, long-term operation may damage the insulation and serious phase-to-phase fault.Aiming at this problem this thesis thoroughly analyses grounding principles and basic characteristics of three kinds of grounded mode (ungrounded, grounded through a resistance, compensated grounded) used in medium voltage network. An automatic tuning suppression-coil device with on-line tap-changer is developed for the capacitive current compensation and faulted line selection in case of an earth fault. The results from field test show that the measurement of the capacitive current is accurate and the effect of compensation is very good when single-phase grounded fault occurs.

Related Dissertations

  1. Study on Automatic Tuning Control System of Arc-Suppession Coil with Magnetic Bias Based on DSP,TM762
  2. The Research on the Measurement of Capacitance Current in Resonance System with Following-Setting Compensation Mode,TM862
  3. Intelligent Control Strategies for High Performance Voltage Regulator Module,TM761.1
  4. EHV Transmission Lines adaptive current differential protection principle,TM773
  5. Technology Research for Accurate Measurement of Capacitive Current and Flexible Control System of Neutral-Point Ground Impedance for Distribution Networks,TM862
  6. Research of Protection Schemes and Their Application in the Quadruple Circuit Transmission Line,TM773
  7. Research on 35kV Power Network Neutral Grounding of Wind Farm,TM862
  8. IGBT-based distribution network neutral grounding impedance control system,TM862
  9. Metal oxide surge arresters resistive current measurement methods,TM862
  10. Research on Current Differential Protection of Quadruple-circuits Transmission Line on the Same Tower,TM773
  11. Research of Some Key Techniques for Resonance Ground Systems,TM862
  12. Study on the Measurement of the Shunt Capacitance in the Resonance Ground System,TM933
  13. Thyristor switched capacitor (TSC) Petersen Coil control device applied research,TM475
  14. Research on Current Differential Protection Principles in UHV Transmission Lines,TM77
  15. High voltage transmission line adaptive research phase current differential protection,TM773
  16. Research on XLPE Power Cable Main Insulation Conditioning Monitoring and Measuring Methods,TM247
  17. Medium voltage grid neutral grounding way,TM862
  18. The Research on the Neutral Flexible Grounding and Its Control Technique for Distribution Network,TM76
  19. Study on Measure Device for Capacitive Phase-to-earth Current in Distribution Network by Injecting Signals,TM933.1
  20. Research on Transient Current Character of UHV Transmission Line and the Affect on Protection,TM773
  21. The Research of Capacitance Current Automatic Measuring and Tuning Method Based on the Approach of Signal Injection,TM933.1

CLC: > Industrial Technology > Electrotechnical > High Voltage Engineering > Overvoltage and Its Protection > Over-voltage protection devices
© 2012 www.DissertationTopic.Net  Mobile