Dissertation > Excellent graduate degree dissertation topics show

Flow Analysis and Structural Optimization of Pressure-regulating Valve Used in Wet Friction Clutch

Author: HeZeYin
Tutor: LinTengZuo
School: Chongqing University
Course: Mechanical Design and Theory
Keywords: marine clutch pressure-regulating valve flow field analysis optimization computational fluid dynamics
CLC: TH137.7
Type: Master's thesis
Year: 2010
Downloads: 76
Quote: 1
Read: Download Dissertation

Abstract


Pressure-regulating valve, an important hydraulic component in hydraulic transmission of gear box, has two main functions: one is to provide oil pressure for the operation of the marine wet friction clutch; the other is to provide oil pressure for lubricantion of the hydraulic system. As the development of wet friction clutches towards high speed and large power, rationality and operation stability of its structure has been drawing more and more attention. Therefore, a research on channel structure and flow field characterization of pressure-regulating valves is necessary to enlarge the power of clutches in design.The topic of this paper is supported by scientific and technological project of Chongqing. The flow field analysis and structural optimization of pressure-regulating valve are carried out so as to design suitable valve for large-scale wet friction clutches. The research work in this paper can be summarized as follows:①Considering the structure of the pressure-regulating valve and working condition, taking spool shape, opening positions, lubricant velocity at the inlet and lubricant temperature as variables, the parameterized finite element analysis program for the oil in the channel of the valve is programmed with ANSYS re-development language-APDL to establish.②Computational simulation of fluid in the pressure-regulating valves are carried out based on turbulence model to obtain pressure contours and velocity vectors of lubricant with different openings, lubricant temperature and flow for the valve, so as to study the kinetic energy and consumption energy of oil in the channel. Pressure test of the valve is carried out on the marine general performance test bench of gearbox for the comparison of experimental pressure-opening position curve with computational one to validate the finite element analysis results.③Oil pressure and velocity distributions are discussed after an analysis of flow field characteristics in the channels of valves with different spools. Then the influence of spool structures to fluid field characterizations is concluded to reduce energy loss of fluid.④Taking least consumption energy as the objective function, structure parameters of spool as design variables, and maximum working oil pressue and minimum lubricant pressure as the state variables, an optimization model of valve is established and then the spool structure is optimized by means of response surface optimization method.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  3. Reseach on Optimal Control of Elevator Group Based upon Ant Colony Algorithm,TU857
  4. Research on High Efficiency Interior Permanent Magnet Synchronous Motor,TM341
  5. Application of Interior-Point Theory for Reactive Power Optimization in Large Power Systems,TM714.3
  6. The Basic Research of Axial Flux Inductor Type High Temperature Superconducting Motor,TM37
  7. The Optimization of AVS Video Decoder on the PC Platform and Improvement of Field Decoding,TN919.81
  8. Research on Stability of Hierarchical Sattellite Network,TN927.23
  9. Query Processing and Optimization in Massive Multi-Database Integration,TP311.13
  10. Research on Feature Extraction and Classification of Tongue Shape and Tooth-Marked Tongue in TCM Tongue Diagnosis,TP391.41
  11. Studies on Fermentation Optimization, Purification and Enzyme Characteristics of Lipase from Aspergillus Oryzae FS-1,TQ925.6
  12. Large the Hongshan iron ore mine personnel tracking positioning system optimization study,TN929.5
  13. Computing Minimum Distance between Curves/Surfaces Based on PSO Algorithm,O182
  14. Analysis of Nutritional Compositions and Quality of Shishen (Eremurus Chinensis Fedtsch.),S647
  15. 1 - deoxynojirimycin synthetic route design and process optimization,TQ463.5
  16. Optimization of Fermentation Conditions, Purification, Cloning and Expression of a Cold-active Lipase from Pseudomonas Sp.RT-1,TQ925
  17. Breeding of Fungal α-amylase High-producing Strain by Genome Shuffling,TQ925
  18. Hot air drying characteristics of lettuce osmotic dehydration mass transfer kinetics and permeability,TS255.52
  19. Study on Application of Red Yeast Rice in Fermented Sausage,TS251.65
  20. Domestication of Acidithiobacillus Ferroxidans and Its Application to Bio-desulfuration of Coal,X701.3
  21. Active Power Filter and Its Application in Distribution Network,TN713.8

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Hydraulic transmission > Hydraulic transmission loop
© 2012 www.DissertationTopic.Net  Mobile