Dissertation > Excellent graduate degree dissertation topics show

Preparation and Properties of Magnetic Polymer Film

Author: ZuoWeiWei
Tutor: HongXia
School: Northeast Normal University
Course: Materials Physics and Chemistry
Keywords: Template Methods Polymer film wettability FePt alloy
CLC: TB383.2
Type: Master's thesis
Year: 2011
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Smart materials have a various applications in many fields such as space exploration. It represents the most active and advanced orientation of the materials science since developed rapidly after the 90s of 20th century. And it has a very important influence on the development of science and technology itself, and getting more and more attention. Our studies begin with the wettability of polymer films, then combine with the chemical stability of magnetic materials FePt alloys. Magnetic polymer films were fabricated finally. Smart materials respond to the magnetic stimulation expect to be prepared follow this way. And details are as follows:1. Study on the polymer film. PMMA porous film, PMMA array film and SBS array film were prepared based on template techniques. We prepared the negative micro-structure film successfully from the micro-structure of the template surface, and the wettability of the film has been improved. And superhydrophobic SBS array film was achieved ultimately by adjusting the micro-structure of the film surface from the template. The contact angle of the SBS array film is around 153°.2. Preparation of magnetic materials FePt alloys. We prepared FePt nanoparticles by co-reduction Fe salt and Pt salt in aqueous at room temperature. The synthesis method is simple and easy to operate, and we used less toxic metal precursors, in line with the requirements of green chemistry. The prepared FePt alloys have a chemically disordered face-centered cubic (fcc) structure. Calculations indicate that particles are about 6 nm in diameter ,and the saturation magnetization of the particles is 20emu / g.3. Preparation of magnetic polymer film. Mixed with the magnetic material FePt alloys and polymer material SBS, Superhydrophobic and magnetic SBS film wes prepared based on template techniques. The contact angle of the film is around 158°, and the saturation magnetization of the film is 1.4emu / g.

Related Dissertations

  1. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  2. Experimental Study of Wettability of Coal and New Wetting Agent,TD714
  3. Wettability of solder preforms dynamic testing method,TN206
  4. Preparation and Characterization of Several Poly(Ionic Liquid) Films with Tunable Wettabitily,TB43
  5. Study of A Low-Silver Lead-Free Solder Alloy,TG42
  6. The Research and Development of Wetting Balance Equipment,TG425
  7. The Study on the Synthesis and Characterization of Modified Trisiloxane,TQ264.1
  8. Research on Compand Foam Dustfall Agent,TD714.4
  9. Soldering Performance and IMC Growth Mechanism of SnAgCuNiBi Lead-free Solder,TG425
  10. Effect of Rare Earth Element on Molten Aluminum Wetting to Steel Sheet,TG174.4
  11. Fabrication and Properties of Copper Matrix Composite Reinforced by Cu-Coated Graphite and Nano-SiCp,TB33
  12. Micro-Nanofabracation and Wettability of Zno Superhydrophobic Structures,TB383.1
  13. Fabrication and Application of Hierarchically Porous Polymer Films Templated by Water Droplets,O631.3
  14. Measurement of Contact Angle and Its Effect on Gas-Liquid Mass Transfer,TQ021.4
  15. Single root bamboo fiber properties and preparation method Relationship,S781.9
  16. Study on Synthesis and Properties of Carboxylate Gemini Surfactant,TQ423.11
  17. Research on Glass Fiber and Resin Wettability,TQ320.1
  18. Several Researches on the Density and Service Temperature of MoSi2 Heating Elements,TM924.03
  19. Study about the Characteristic of Poplar Surface by the Treatment of Low Temperature Plasma,TS652
  20. Research on Gluing of Outdoor Glued Structural Laminated Bamboo,TS653
  21. The Influence of Ion Implantation on the Corrosion Resistance and Blood Compatibility of 316L Stainless Steel with Surface Pores,TG174.4

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile