Dissertation > Excellent graduate degree dissertation topics show

Preparation of Perovskite ABO3 （A=Ba, Sr; B=Ti, Mn） Oxides by CHM Method

Author: MiaoJing
Tutor: HuChenGuo；WangWanLu
School: Chongqing University
Course: Condensed Matter Physics
Keywords: BaTiO3 SrTiO3 CHM growth mechanism photoluminescence
CLC: O482
Type: Master's thesis
Year: 2007
Downloads: 110
Quote: 0
Read: Download Dissertation

Abstract


BaTiO3、SrTiO3 are typical perovskite-type （ABO3） complex oxides. As new type of multi-functional materials, they are widely used in multilayer ceramic capacitors, grain boundary layer capacitors, piezoresistors and multi-functional sensors, etc. Currently, perovskite-type nanomaterials can be synthesized from solid, liquid and gas phase. For industrial production, solid phase synthesis has been commonly adopted. However, because the production process is often followed by milling and high-temperature annealing, powders prepared by this method consist of non-uniform, coarse particles and impurities, which can cause a low stability of the devices. Solution chemical method used to synthesize perovskite-type nanomaterials includes hydrothermal synthesis, sol-gel, coprecipitation and spray drying. Most of them involve high temperature annealing and/or high pressure, complex process, low crystallization and expensive raw materials, which are not suitable for industrialization.In this study, we developed a novel simple method-composite-hydroxide-mediated （CHM） route to synthesize well crystallized, highly pure, stoichiometrily precise BaTiO3、SrTiO3 and BaTi0.5Mn0.5O3 nanocrystals. This method only requires low synthesis temperature and pressure, which is beneficial for mass-production with low costs.As-synthesized BaTiO3 by CHM are uniform, well dispersed nanoparticles, which have a cubic structure with sizes from 70 to100 nm. Experimental results indicated that higher temperature and longer growth time promoted the growth of particles with larger sizes. It was also found that a small amount of deionized water can induce the growth of the sphere shaped particles.The synthesized SrTiO3 nanorods have lengths from 500 to 800 nm and widths about 100-150 nm, and exhibit plate-shape grains. The grains have lengths of 70 nm, width of 70 nm and height of 5-10 nm. Between the grains, small dislocations were observed. Deionized water was also found to facilitate the growth of nanorods with the cubic structure.The BaTi0.5Mn0.5O3 elliptical nanorods synthesized by CHM method shows a hexagonal perovskite structure. Typical nanorods have widths ranging from 20 to 50nm, and lengths from 100 to 500 nm.The growth model of BaTiO3 and SrTiO3 was prospered by combining the growth unit model of anion coordination polyhedron and the aggregative growth model. We suggest that Ti（OH）610-unit is the favored growth unit, and the crystal growth follows the dissolution-crystallization-aggregative growth-recrystallization mechanism.Photoluminescence properties of the synthesis nanostructured were also investigated at the room temperature. It was found that when excited by the 350nm laser, pure BaTiO3 powders show a weak emission peak at about 465nm. However, when 50% Ti is substituted by Mn, the as-synthesized BaTi0.5Mn0.5O3 exhibits bright emission peaks at about 465nm and 593nm, respectively.

Related Dissertations

  1. Eu- doped α-SiAlON phosphor First-principles study,TB34
  2. Hydrogenated nanocrystalline silicon photovoltaic materials in hydrogen bonding defects in material structure and the impact of,TB383.1
  3. Terphenyl liquid crystal containing chiral polyacetylene Synthesis and Properties,O631.3
  4. Based on the industrial chain business growth mechanism of embedding,F426.2
  5. Impact of Import Trade on Ecnomic Growth,F124;F224
  6. Preparation of phase separation of the amorphous silicon oxide and nanocrystalline silicon mosaic silica,TN304.1
  7. Optical Properties of Zn-based Quantum Dots and Application in LED,O471.1
  8. Luminescence Properties of Thenardite Activated with Eu and Tb,O482.31
  9. Study on Preparation and Properties of Fluorescent Offset Printing Ink,TS802.3
  10. One-dimensional ZnO semiconductor nanowires and field emission properties of,TB383.1
  11. Carbothermal reduction and the preparation of silicon carbide nanowires its performance,TB383.1
  12. Surface deposition of copper thin film of porous silicon , Preparation and luminescence characteristics of,TB383.4
  13. Hydrothermal Preparation and characterization of nano - ZnO and yttrium aluminum garnet,TB383.1
  14. Controllable Growth and Properties of ZnO Nanorod Arrays,TB383.1
  15. Preparation and Luminescence Properties of SnO2 Nano-materials and Eu3+-doped SnO2 Nano-Particles,TB383.1
  16. The Synthesis of Aluminate (Silicate) Materials by Molten Salt Process and Their Photoluminescence,TQ422
  17. Measurements Combine Electroluminescence with Photoluminescence and Analog Simulation of PET,O631.23
  18. Research on Preparation of Calcium Sulfate Whiskers by Atmospheric Acidification Method,TQ132.32
  19. The Infrared Emissivity and Photoluminescence of Rare Earth Doped ZAO Ceramics,TQ174.75
  20. Study on the Synthesis and Optical Properties of New Inorganic Luminescent Materials Co-doped with Rare Earth Ions,O611.4
  21. The Study of Light Absorption Charateristics of Doped Complex Oxide with Perovskite Stucture,O643.36

CLC: > Mathematical sciences and chemical > Physics > Solid State Physics > Solid nature of the
© 2012 www.DissertationTopic.Net  Mobile