Dissertation > Excellent graduate degree dissertation topics show

Preparation and Oriented Assembly of LDHs, MMO Nanoparticles and Their Applications in Waste Water Treatment

Author: LiuZuo
Tutor: DuanXue
School: Beijing University of Chemical Technology
Course: Applied Chemistry
Keywords: layered double hydroxides mixed metal oxides oriented assembly film sulfide anions methyl orange removal capacity removal mechanism
CLC: X703
Type: Master's thesis
Year: 2007
Downloads: 50
Quote: 0
Read: Download Dissertation

Abstract


In order to realize the application of layered double hydroxides （LDHs） and mixed metal oxides （MMO） in waste water treatment, preparation and oriented assembly of LDHs and MMO nanoparticles have been investigated, and the capacities and mechanisms of removing sulfide anions (S2-) and methyl orange （MO） have been systematically investigated. The main results are as follows:1．Based on the exchangeable property of the interlayer anions and the so-called "memory effect" of LDHs, the capacities and mechanisms of removing sulfide anions (S2-) were studied using chloride-containing MgAl-LDHs （MgAl-Cl-LDHs） and MgAl-MMO. Structures of the products obtained by anions exchange and reconstruction respectively and the removal capacities were characterized by XRD, FT-IR, UV-Vis and ICP, and the different mechanisms for MgAl-Cl-LDHs and MgAl-MMO were proposed. The results indicated that the removal capacity for MgAl-MMO was much greater than that for MgAl-Cl-LDHs. When pH is 9, S2- was hydrolyzed and mainly existed as HS-in the solution. When MgAl-Cl-LDHs was used to remove S2-, due to the weaker exchange ability for HS-compared to Cl-, HS- could not enter the interlayer through anions exchange with Cl-. Adsorption of HS-to the sample’s surface and oxidation to S2O32- are the removal mechanisms for MgAl-Cl-LDHs. While when we used MgAl-MMO, during the structure recovering, HS-entered the interlayer qickly, and were oxidized to thiosulfate anions (S2O32-) and polysulfide anions （S2-and S3-） simultaneously because MgAl-MMO has the abilities to catalyze and oxidize. Therefore, it can remove S2- efficiently. The products of LDHs with Mg/Al molar ratio of 2 calcined at 500℃were shown to have a high degree of removal capacity, which had reached above 98%. Therefore, it is a method with high efficiency to remove S2- by using MgAl-MMO.2．Novel, simple and general methods for ZnAl-NO3-LDHs and ZnAl-MMO nanoparticles oriented assembly to films have been developed. The uniform and small crystal size of LDHs nanoparticles favor not only face-to-face type interactions but also edge-to-edge type interactions between individual LDHs nanoparticles, and is the major factor in the formation of a uniform densely packed c-oriented LDHs film. Highly ordered transparent films of ZnAl-NO3-LDHs with a size of the order of cm2 have been obtained by the simple method. Furthermore, highly homogeneous oriented large crack-free nanostructured ZnAl-MMO films with narrow mesopore size distribution have been fabricated using low-cost and easily processible inorganic hydroxide as precursor.3．The capacities and mechanisms of removing MO which was simulated as organic contamination have been studied using ZnAl-NO3-LDHs and ZnAl-MMO films. The results indicated that the removal capacity for ZnAl-NO3-LDHs films was much greater than that for ZnAl-MMO films. When ZnAl-NO3-LDHs films were used as the precursor to remove 20mg/L MO, due to the anionic exchange and adsorption for MO, the removal capacity could reach 97．92%, and the loading was 196．68mg/g. Though reacted for 96h, the morphology and c-oriented property of the film were preserved. Therefore, it is a method with high efficiency to remove low concentration MO by using ZnAl-NO3-LDHs films. While when ZnAl-MMO films were used, MO was only adsorbed to the surface, thus they cannot remove MO efficiently.

Related Dissertations

  1. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  2. Flow Field Numerical Simulation and Performance Analysis for the Conical Hydrostatic Bearing,TH133.36
  3. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  4. Research on the Dynamics of Rotor-Cylindrical Bearing System and Rotor-Elloptical Bearing System,TK263.6
  5. Research of the Performances of Ferroelectric Film and Compositional-Graded Ferroelectric Film,TM221
  6. TV drama fashion element,J905
  7. Study on Wastewater Purification Effect of the Free Surface Wetland with Different Substrates and Plant Combination,X703
  8. A Feasibility Study of IMRT Dosimetric Verification Using Radiochromic Film,R815
  9. Adsorption Effects of Phosphate and Chromium from Aqueous Solution by Adsorption Using LDH and Mg/Fe/Al Modified Montmorillonites,X703
  10. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  11. Modification for PVA-Based Composite Packaging Material with Nano-SiO2 and Its Influence on Fresh Preservation Effect of Salted Duck Eggs,TS253.46
  12. The Preparation and the Properties of the Composite Films from Cassava Starch and Guar Gum,TS236.9
  13. Preparation of Bio-material Liquid Film and Its Applying Effects,S316
  14. Studies on the Physiology and Biochemistry Characteristics and Fresh Keeping Technology of Post-Harvest in Pleurotus Eryngii,S646
  15. Study on the Effect of Natural Antioxidant and Edible Film for Dry-Cured Meat Products,TS251.6
  16. Iron, lanthanum -doped nano TiO \u003csub\u003e 2 \u003c/ sub\u003e Preparation and photocatalytic properties,O614.411
  17. Preparation and Performance Study of the Full-degradable Polythene Films,TQ320.721
  18. Research on the Plasticizers of Starch Sizing Agents,TS103.846.1
  19. Dry Eye Patients Dalian Ophthalmology Out Patient Department Survey,R777
  20. Imidazolium ionic liquids selective electrode and its research activity coefficient,O646
  21. Fluorine silicone acrylate copolymer emulsion synthesis and properties of,TQ316.334

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Wastewater treatment and utilization
© 2012 www.DissertationTopic.Net  Mobile